VectorLinux

The nuts and bolts => Installation & Updates => Topic started by: Cariboo on April 07, 2008, 07:32:35 pm

Title: Dual boot WindowsXP and VL [SOLVED]
Post by: Cariboo on April 07, 2008, 07:32:35 pm
Hello all,
On a Laptop Dell Inspiron 2500, with 20GB hard drive  is Windows XP installed.
I resized the Windows partition to 10GB, so I have 10GB for VL.
I got stuck with the installation at the question where to install LiLo.

I have 4 otions:
MBR        Install to Master Boot Record
Sector    Install to boot sector
Floppy    install to a formatted floppy
Skip        Do not install LiLo

I want to use only option MBR or Sector

Where do I have to install LiLo to have the opportunity to select between Windows and VL when starting the computer?
 ???

Title: Re: Dual boot WindowsXP and VL
Post by: GrannyGeek on April 07, 2008, 08:47:37 pm
Installing LILO in the MBR or on a floppy will give you the option to choose either OS if that's what you want to do. When you're setting up LILO you'll have a chance to select what operating systems you want to be able to choose when you boot.

You can also modify the XP boot loader to offer you the option of XP or Linux. This will leave your MBR alone and is what I prefer to do on my XP/VectorLinux computers. I have a HowTo on "HOWTO Boot to VectorLinux using the Windows NT/2000/XP boot menu" at http://www.vectorlinux.com/forum2/index.php?topic=1073.msg6559#msg6559 .
--GrannyGeek
Title: Re: Dual boot WindowsXP and VL
Post by: BlueMage on April 08, 2008, 02:58:33 am
I would just like to add that I have WindowsXP installed alongside Vector SOHO 5.8 on my old laptop - boot-choice is done by LILO in MBR, and I've had no issues.  The first version was set up by the LILO auto-config, which worked out of the box, and I've since added passwording and an option to boot from a USB device.

What I'm saying is, by all means, back up your XP data if you don't want to lose it, but the most likely outcome is that you will have a perfectly functioning bootloader which gives you the option of Vector or XP if you install to MBR.
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on April 08, 2008, 05:13:12 pm
Thanks,guys,for the replies and suggestions......

I ran into another difficulty...
after installing "Absolute Linux" on this Laptop for test purpose (it works, but I like VL better),
I tried once more to install VL and now I got stuck big time!

The loading procedure from the VL-CD stops/hangs at the text line:

"Loading iSCSI transport class v2.0-724".

Please help, I'm totally lost with that ...

Help, please!
Cariboo
Title: Re: Dual boot WindowsXP and VL
Post by: Colonel Panic on May 06, 2008, 08:21:27 am

I had a similar problem with Vector 5.1. Just a guess, but I'd say your CD-ROM drive isn't reading the Vector disk properly.

I solved it by getting a different version of Vector and just installing the LILO bootloader, which picks up the partitions with Linux on them anyway.
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 06, 2008, 10:01:51 pm
I had a similar problem with Vector 5.1. Just a guess, but I'd say your CD-ROM drive isn't reading the Vector disk properly.
With this comment, do refer to my boot loading isue?
BTW, thank you.... you are the first person who gives any comment to this issue..... :)
Title: Re: Dual boot WindowsXP and VL
Post by: Colonel Panic on May 07, 2008, 09:06:02 am
Quote from: Cariboo
With this comment, do refer to my boot loading isue?

Yes I am. I should have made myself clearer, sorry. I'm only guessing from my own experience, but what it looks like to me is that when your computer gets to this line

"Loading iSCSI transport class v2.0-724".

it then tries to read the Linux installation disk to find out what to do next, and isn't able to do so.

There is a step in the installation procedure which enables you to check the Vector disk to make sure it's OK and the drive is reading it properly, and it's probably worthwhile doing that.
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 07, 2008, 09:30:52 am
There is a step in the installation procedure which enables you to check the Vector disk to make sure it's OK and the drive is reading it properly, and it's probably worthwhile doing that.

Thanks Colonel Panic,
I'll follow your suggestion...
I think the CD is alright, though, because it worked on other PC, but not on this Laptop,
so you may be right, the culprit is the  DVD drive....!?

EDIT: More Info

Sorry for not being clear enough....
Installation from CD to a clear/formatted hard drive works well.
VL runs perfectly after new installation.
Restart and boot from hard drive works as well.
But shutdown and restart does hang at line "Loading iSCSI transport class v2.0-724".

I found this in /etc/rc.d/rc.modules (which is the main system boot scrip)

## Kernel 2.4 base modules
if [ "$VERSION" = "2.4" ]; then

    ### load ide-scsi if specified on boot parameter
    if grep -q "=ide-scsi " /proc/cmdline ; then
   /sbin/modprobe ide-scsi
    fi
    fi
# end VERSION check

Can this have anything to do with my problem?



Title: Re: Dual boot WindowsXP and VL
Post by: Colonel Panic on May 08, 2008, 01:34:03 pm

Hi again. I'm afraid that one's a bit beyond me, though I believe others here will be able to help.
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 08, 2008, 01:52:54 pm
Cariboo,

You have posted the same question in a few different threads with different topics.
I think the cross posting is only causing confusion, and getting you less responses.

you asked
Quote
I found this in /etc/rc.d/rc.modules (which is the main system boot scrip)

## Kernel 2.4 base modules
if [ "$VERSION" = "2.4" ]; then

    ### load ide-scsi if specified on boot parameter
    if grep -q "=ide-scsi " /proc/cmdline ; then
   /sbin/modprobe ide-scsi
    fi
    fi
# end VERSION check

Can this have anything to do with my problem?
This code has nothing to do with your problem for a few diff reasons:
1) the kernel is still loading and has not ran any of the scripts on the system.
2) the code block you posted is looking for a 2.4 series kernel and because none is present it will never execute.

If you can try one of the kernel boot commands I supplied to your other post (noapic or routeirq) and let us know if they have any effect booting the installed system we can help you further from there.

Uelsk8s
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 09, 2008, 02:42:42 pm
!!!!Thank you Uelsk8s, for the reply....
I apologize for causing confusion....I tried very hard to get any response and because the issue is beyond my understanding I got confused myself..sorry.

I try to concentreate the whole issue here.

THIS  (http://www.vectorlinux.com/forum2/index.php?topic=6146.msg42760#msg42760) is the other thread dealing with the same issue.
Here I already posted what happened when I addad the boot options (noapic or routeirq)

Quote
Thank you, uelsk8s, for the suggestions.

I use LiLo and I'm not sure if I do it right.
Selecting either 'linux, linux-tui or linux-gui'.
After pressing "Tab" on either selection I get the prompt:

boot: <Selection>

Then I press "blank" and type either 'noapic or routeirq'

Result:
In all cases the boot sequence stops/hangs at
'Loading iSCSI transport class v2.0-724'


Edit May 8, 2008, about ten minutes later.

To make the mystery perfect, this is what happened next, after boot stopped:

1] I turned off/shutdown with the Power button...
2] I turn the computer on...
3] I insert a Knoppix 5.1 Live CD...
4] I check the partition where VL is on by mounting this partition and reading, for example,
    the /etc/rc.d/rc.modules file...
5] I unmount the VL partition...
6] I select 'Restart'...Knoppix goes down...
7] I remove the Knoppix CD... and press 'Enter'
8] The LiLo menu comes up... and I choose "Linux"
9] The system boots to the end and VL is up and runs again...
As I said, it is far beyond my understanding. At least, I know now how to save my VL installation ;D
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 09, 2008, 07:22:00 pm
Cariboo,

you are having a very odd situation there.
I wish i could tell you exactly what was stopping the kernel from loading.
The best course for you may be to compile a custom kernel with all of the scsi and sata drivers removed.


Uelsk8s
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 09, 2008, 07:42:50 pm
The best course for you may be to compile a custom kernel with all of the scsi and sata drivers removed.
Uelsk8s
Thank you Uelsk8s, for taking time and dealing with this very strange behaviour!

Now you caught me with your recommendation to build a custom kernel.......
You must know that I'm, right now, absolutely clueless when it comes to kernel issues.... ???
I would like to do that, but this would mean, that you have to give a kind of a walk through....
and that is probably to much to ask...

I wonder if there is anybody who has a Dell Inspiron 2500 with VL installed...
It cannot be that I'm the only one on planet earth ;D

Cariboo
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 09, 2008, 09:27:02 pm
I am wondering if you remove the iscsi module if it will keep your computer from stalling.
try finding the iscsi modules and move them somewhere then reboot to see if that fixes it.

Code: [Select]
root:# find /lib/modules/ -name *iscsi*
/lib/modules/2.6.22.19/kernel/drivers/scsi/libiscsi.ko
/lib/modules/2.6.22.19/kernel/drivers/scsi/iscsi_tcp.ko

this code ran as root should work
Code: [Select]
for i in $(find /lib/modules/ -name *iscsi*);do mv $i /root;done
try that and let me know if it does anything


Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 10, 2008, 07:15:42 am
Before I try that I want to bring to your attention what I observed...
(I'm not sure if it is of any importance in this case):

The disrupted boot stops way before the line "Loading modules" on a normal boot.
The screen SHOT (http://cariboo.1938.googlepages.com/VL-Boot02.JPG) shows the the information before boot stops.

Because it is not certain what happens and I don't want to loose my VL installation
I'm very cautious.
Therefore I didn't try yet and wait for your comment.
Again, thanks for your help :)

BTW
I found this and it looks the same as yours, except the kernel version:
root:# find /lib/modules/ -name *iscsi*
/lib/modules/2.6.22.14/kernel/drivers/scsi/libiscsi.ko
/lib/modules/2.6.22.14/kernel/drivers/scsi/iscsi_tcp.ko
 
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 10, 2008, 07:42:26 am
All we are doing is moving a couple of modules.
they will be in /root until we figure out if you need them at all.
there is nothing dangerous about this operation.
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 12, 2008, 07:49:01 am
I moved the files to /root.
No improvement..
After Shutdown and Restart the boot sequence stops/hangs...
Again, after loading Knoppix and then restart from there, everything is fine again....
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 12, 2008, 08:22:05 am
well then, if your sure the modules were removed from /lib/modules then there is nothing more you can do but compile a custom kernel :(
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 12, 2008, 09:24:57 am
How can I be sure? I tried to find them but I always get this:
Quote
vector:/~
root:# find /lib/modules/ -name *iscsi*
find: paths must precede expression
Usage: find [-H] [-L] [-P] [path...] [expression]
vector:/~
root:# find /root -name *iscsi*
find: paths must precede expression
Usage: find [-H] [-L] [-P] [path...] [expression]

I absolutely don't know how to compile a kernel....
can you tell me what I would have to do?
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 12, 2008, 10:52:54 am
The easiest and best path for you, and anyone that runs into this in the future would be to remove the modules, if that will work.
so try this first.
Code: [Select]
ls /lib/modulesif that shows either the iscsi_tcp.ko or libiscsi.ko then delete them
then try
Code: [Select]
ls /lib/modules/2.6.22.14/kernel/drivers/scsi/and if that shows either the iscsi_tcp.ko or libiscsi.ko then delete them
then run
Code: [Select]
depmod -aqand reboot

If that works, then great, if not post back the output of lsmod there and well work on walking you through building a kernel
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 12, 2008, 01:35:36 pm
Here is the output of the two list commands.

r
Quote
oot:# ls /lib/modules
2.6.22.14/
vector:/~
root:# ls /lib/modules/2.6.22.14/kernel/drivers/scsi/
ch.ko  ide-scsi.ko  imm.ko  osst.ko  pcmcia/  ppa.ko  scsi_wait_scan.ko  st.ko
vector:/~
root:#
I had nothing to delete, right?

so I ran "depmod -aq" and rebooted.

Then came the 'shutdown'  test....
and boot stops at line "Loading....", boot from a Knoppix CD, restart,
....and here we are again!

This is the output of lsmod:

Quote
vector:/~
root:# lsmod
Module                  Size  Used by
freq_table              4768  0
lp                     10888  0
parport_pc             37092  1
parport                32072  2 lp,parport_pc
i915                   23296  0
drm                    74388  1 i915
snd_seq_dummy           3716  0
snd_seq_oss            32128  0
snd_seq_midi_event      7168  1 snd_seq_oss
snd_seq                48720  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          7692  3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            38048  0
snd_mixer_oss          15232  1 snd_pcm_oss
snd_intel8x0           29980  2
snd_ac97_codec         98084  1 snd_intel8x0
ac97_bus                2944  1 snd_ac97_codec
snd_pcm                69764  3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer              19972  2 snd_seq,snd_pcm
snd                    45796  14 snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore               7008  1 snd
snd_page_alloc          8712  2 snd_intel8x0,snd_pcm
martian_dev            17940  0
serio_raw               6276  0
intel_agp              22164  1
agpgart                28108  3 drm,intel_agp
iTCO_wdt                9640  0
i2c_i801                8592  0
shpchp                 30228  0
i2c_i810                5380  0
i2c_algo_bit            6532  1 i2c_i810
pci_hotplug            28616  1 shpchp
i2c_core               20992  3 i2c_i801,i2c_i810,i2c_algo_bit
evdev                   8704  0
vector:/~

BTW, I want to say, thank you, for the support...
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 14, 2008, 08:57:10 pm
If that works, then great, if not post back the output of lsmod there and well work on walking you through building a kernel
Hi Uelsk8s,
I did some reading about kernel compilation...it's obviously part of daily Linux life...
I'm kind of ready to go..but I still have no idea what I would have to do...
Are you still working on my issue?
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 14, 2008, 09:41:14 pm
Sorry, I must have missed your last post.

first thing I am going to have you do is get the kernel source from here: http://vectorlinux.osuosl.org/veclinux-5.9/kernels/kernel-src-2.6.22.19-i586-1vl59.tlz
(It solves some security issues, remains compatible, and will be easy to distinguish from your default kernel)

frst su to root then
install it with "installpkg kernel-src-2.6.22.19-i586-1vl59.tlz" in the same dir you downloaded it into

then change into the kernel source directory "cd /usr/src/linux-2.6.22.19" and run "make menuconfig"
that will get you a menu that looks like this
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot7.png)

choose the device drivers menu and then scroll down to this section
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot8.png)

uncheck it so it looks like this
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot9.png)

push the up arrow then enter to get into the scsi device menu
and choose the scsi low level drivers menu shown here
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot10.png)

remove the M or * from all the drivers in this section so it looks like this
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot14.png)

then exit out till it asks if you want to save
(http://i45.photobucket.com/albums/f59/uelsk8s/kernel/snapshot15.png)

after saving run "make && make modules_install"

when that completes (could be hours later)
copy the kernel to /boot "cp arch/i386/boot/bzimage /boot/vmlinuz-2.6.22.19"

then run vliloconf and you should see an additional kernel selection
reboot and choose it

let us know how it goes,
Uelsk8s

Title: Re: Dual boot WindowsXP and VL
Post by: nightflier on May 15, 2008, 05:50:16 am
Now that is support, you couldn't buy that kind of service!  ;)

Uelsk8s post could be made into a nice howto.
Title: Re: Dual boot WindowsXP and VL
Post by: fuelinux on May 17, 2008, 11:34:04 am
Now that is support, you couldn't buy that kind of service!  ;)

Uelsk8s post could be made into a nice howto.

+1

Indeed, it HAS TO be made into the HowTo
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 18, 2008, 01:41:19 pm
............
when that completes (could be hours later)
copy the kernel to /boot "cp arch/i386/boot/bzimage /boot/vmli
nuz-2.6.22.19"
 :D
Let us know how it goes,
Uelsk8s

Hi Uelsk8s,
 Sorry for answering so late but I got stuck.......
I tried several times following your very clear instructions and all went well and without any noticeable warnings or errors until I came to the "copy the kernel to /boot" instruction. Here i got the message:
Quote
cp: cannot stat `arch/i386/boot/bzimage': No such file or directory
I'll post the root terminal outputs after each step as screenshots HERE (http://cariboo.1938.googlepages.com/vectorlinux).
What other info would you need to track the proplem?
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 18, 2008, 02:57:27 pm
sorry for the typo
the command is
Quote
cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.22.19
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 18, 2008, 03:45:37 pm
sorry for the typo
the command is
cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.22.19

Small things huge I(mpact), it's OK, although it cost me some nerves.... ;D
Now /boot looks like this:
Quote
vector://usr/src/linux-2.6.22.19
root:# cp arch/i386/boot/bzImage /boot/vmlinuz-2.6.22.19
vector://usr/src/linux-2.6.22.19
root:# cd /boot
vector://boot
root:# ls -l
total 8996
lrwxrwxrwx 1 root root      37 2008-05-04 15:19 README.initrd -> /usr/doc/mkinitrd-1.1.2/README.initrd
lrwxrwxrwx 1 root root      20 2008-05-04 15:19 System.map -> System.map-2.6.22.14
-rw-r--r-- 1 root root 1183469 2007-11-26 02:28 System.map-2.6.22.14
drwxr-xr-x 2 root root    4096 2007-10-31 04:25 bitmap/
-rw-r--r-- 1 root root     512 2008-05-04 15:47 boot.0300
-rw-r--r-- 1 root root     193 2005-01-22 23:37 boot.label
lrwxrwxrwx 1 root root      16 2008-05-04 15:19 config -> config-2.6.22.14
-rw-r--r-- 1 root root   68615 2007-11-26 02:28 config-2.6.22.14
drwxr-xr-x 2 root root    4096 2007-10-02 03:00 grub/
-rw-r--r-- 1 root root  210922 2007-11-13 17:59 initrd
-rw------- 1 root root  333312 2008-05-04 15:47 map
drwxr-xr-x 2 root root    4096 2008-05-04 15:47 tamu/
lrwxrwxrwx 1 root root      17 2008-05-04 15:19 vmlinuz -> vmlinuz-2.6.22.14
-rw-r--r-- 1 root root 4158168 2007-11-26 02:28 vmlinuz-2.6.22.14
-rw-r--r-- 1 root root 3200856 2008-05-18 15:21 vmlinuz-2.6.22.19
vector://boot
Three questions:
1) What is the command line for lilo.config?
2) Do I have to change mod for the new kernel?
3) If it works, how can I replace vmlinuz ->vmlinuz-2.6.22.14 with vmlinuz -> vmlinuz-2.6.22.19?

Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 18, 2008, 04:23:55 pm
Three questions:
1) What is the command line for lilo.config?
 vliloconf is the vector linux lilo config utility
2) Do I have to change mod for the new kernel?
 modules? not sure what your asking here, but you built and installed modules for the new kernel above
3) If it works, how can I replace vmlinuz ->vmlinuz-2.6.22.14 with vmlinuz -> vmlinuz-2.6.22.19?
 vliloconf will add a boot option for both kernels so all you have to do is choose the one you want to use at each boot.
If you want to remove the 2.6.22.14 kernel just run removepkg kernel and removepkg kernel-modules
then symllink the new kernel "ln -s /boot/vmlinuz-2.6.22.19 /boot/vmlinuz
and run vliloconf again to update lilo
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 18, 2008, 05:47:49 pm
After running 'vliloconf' this is the etc/lilo.conf file.
two things are missing:
1) image for WindowsP on hda1
2) image for new kernel on hda5
although I check marked both in the config menu.

/etc/lilo.conf
Quote
# LILO configuration file
# generated by 'liloconfig'
#
# Start LILO global section
boot = /dev/hda
default = linux
compact
prompt
timeout = 100
# Override dangerous defaults that rewrite the partition table:
change-rules
  reset
bitmap = /boot/bitmap/boot.bmp
# VESA framebuffer console @ bootsplash-high
vga = 791
# Normal VGA console
# vga = normal
# VESA framebuffer console @ 1024x768x64k
# vga=791
# VESA framebuffer console @ 1024x768x32k
# vga=790
# VESA framebuffer console @ 1024x768x256
# vga=773
# VESA framebuffer console @ 800x600x64k
# vga=788
# VESA framebuffer console @ 800x600x32k
# vga=787
# VESA framebuffer console @ 800x600x256
# vga=771
# VESA framebuffer console @ 640x480x64k
# vga=785
# VESA framebuffer console @ 640x480x32k
# vga=784
# VESA framebuffer console @ 640x480x256
# vga=769


# End LILO global section
# Partition 1: Linux GUI mode
image = /boot/vmlinuz
    root = /dev/hda5
    label = linux
    append = "splash=silent "
    read-only
    initrd = /boot/initrd
# Partition 2: Linux TUI mode
image = /boot/vmlinuz
    root = /dev/hda5
    label = linux-tui
    append = "2 splash=silent "
    read-only
    initrd = /boot/initrd
# Partition 3: Linux GUI mode
image = /boot/vmlinuz
    root = /dev/hda5
    label = linux-gui
    append = "4 splash=silent "
    read-only
    initrd = /boot/initrd

See HERE (http://cariboo.1938.googlepages.com/vectorlinux) the vliloconf screenshots
Title: Re: Dual boot WindowsXP and VL
Post by: uelsk8s on May 18, 2008, 06:29:23 pm
All options are checked by default (as they should be for your case)
you have unselected windows and the new kernel
Title: Re: Dual boot WindowsXP and VL
Post by: Cariboo on May 18, 2008, 09:35:18 pm
All options are checked by default (as they should be for your case)
Sorry, I couldn't recognize that they were checked, because it is not a clear check mark in this menu...

Anyway, Uelsk8s, I have to give you many thanks for this excellent Linux  lesson and the outstanding support you provided.....now it works...
The problem is solved, case closed. Celebrating VectorLinux Victory.
In my opinion, VL is the best distro for an old Dell Inspiron 2500 Laptop! :)
Cariboo
BTW:
If I want to remove the *.14 kernel, you said in your previous post, that I should run 'removepkg kernel and removepkg kernel-src'.
Don't I have to define which kernel version I want to remove?   
Title: Re: Dual boot WindowsXP and VL [SOLVED]
Post by: uelsk8s on May 18, 2008, 09:52:33 pm
Quote
BTW:
If I want to remove the *.14 kernel, you said in your previous post, that I should run 'removepkg kernel and removepkg kernel-src'.
Don't I have to define which kernel version I want to remove?   
it should be removepkg kernel and removepkg kernel-modules
you should only have 1 version installed by the package manager thats why you wouldnt have to define which version.
you can run pkgtool from a terminal then remove the packages there so you can see exactly what is being removed by what you select.
or list the files by "ls /var/log/packages|grep kernel"


Glad everything worked out,
Uelsk8s
Title: Re: Dual boot WindowsXP and VL [SOLVED]
Post by: exeterdad on May 19, 2008, 03:53:35 am
Outstanding job Uel :)
Congrats to you Cariboo.  You stuck to it and got it done!