Well...Video is working OK (not perfect but OK) in the 2133 with the latest Flash. Problem now is no audio - I get part of the first word and then audio cuts out completely. Tried all the audio suggestions without success. Audio in XMMS works perfectly as does local DVD playback.
vector://home/david
root:# dmesg
000009000] PGTABLE ==> [0000007000 - 0000009000]
#7 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000]
found SMP MP-table at [c00ff780] 000ff780
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
Normal 0x00001000 -> 0x00037eb0
HighMem 0x00037eb0 -> 0x00037eb0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x00037eb0
On node 0 totalpages: 228943
free_area_init_node: node 0, pgdat c092ad00, node_mem_map c1000000
DMA zone: 3967 pages, LIFO batch:0
Normal zone: 223186 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 2 I/O APICs
ACPI: HPET id: 0x11068201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 1 CPUs, 0 hotplug CPUs
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
mapped IOAPIC to ffff9000 (fecc0000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
Allocating PCI resources starting at 40000000 (gap: 37f00000:c6d00000)
PERCPU: Allocating 37788 bytes of per cpu data
NR_CPUS: 8, nr_cpu_ids: 1, nr_node_ids 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227153
Kernel command line: BOOT_IMAGE=linux-tui ro root=801 2 acpi=force
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c09b5000 soft=c09ad000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Extended CMOS year: 2000
TSC: PIT calibration confirmed by PMTIMER.
TSC: using PIT calibration value
Detected 997.463 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 898300k/916160k available (5775k kernel code, 17352k reserved, 2664k data, 404k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
lowmem : 0xc0000000 - 0xf7eb0000 ( 894 MB)
.init : 0xc0945000 - 0xc09aa000 ( 404 kB)
.data : 0xc06a3fed - 0xc093e020 (2664 kB)
.text : 0xc0100000 - 0xc06a3fed (5775 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
hpet clockevent registered
Calibrating delay loop (skipped), value calculated using timer frequency.. 1994.92 BogoMIPS (lpj=997463)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 128K (64 bytes/line)
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 19k freed
ACPI: Core revision 20080609
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Centaur VIA C7-M Processor 1000MHz stepping 00
Brought up 1 CPUs
Total of 1 processors activated (1994.92 BogoMIPS).
net_namespace: 604 bytes
xor: automatically using best checksumming function: pIII_sse
pIII_sse : 2148.000 MB/sec
xor: using function: pIII_sse (2148.000 MB/sec)
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7
PCI: Using configuration type 1 for base access
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: 0000:00:00.0 reg 10 32bit mmio: [f0000000, f7ffffff]
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
PCI: 0000:00:0f.0 reg 10 io port: [cc00, cc07]
PCI: 0000:00:0f.0 reg 14 io port: [c880, c883]
PCI: 0000:00:0f.0 reg 18 io port: [c800, c807]
PCI: 0000:00:0f.0 reg 1c io port: [c480, c483]
PCI: 0000:00:0f.0 reg 20 io port: [c400, c40f]
PCI: 0000:00:0f.0 reg 24 io port: [c000, c0ff]
PCI: 0000:00:10.0 reg 20 io port: [b800, b81f]
pci 0000:00:10.0: supports D1
pci 0000:00:10.0: supports D2
pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.0: PME# disabled
PCI: 0000:00:10.2 reg 20 io port: [b880, b89f]
pci 0000:00:10.2: supports D1
pci 0000:00:10.2: supports D2
pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.2: PME# disabled
PCI: 0000:00:10.3 reg 20 io port: [bc00, bc1f]
pci 0000:00:10.3: supports D1
pci 0000:00:10.3: supports D2
pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.3: PME# disabled
PCI: 0000:00:10.4 reg 10 32bit mmio: [fbeffc00, fbeffcff]
pci 0000:00:10.4: supports D1
pci 0000:00:10.4: supports D2
pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:10.4: PME# disabled
PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
PCI: 0000:01:00.0 reg 14 32bit mmio: [fc000000, fcffffff]
PCI: 0000:01:00.0 reg 30 32bit mmio: [fbff0000, fbffffff]
pci 0000:01:00.0: supports D1
pci 0000:01:00.0: supports D2
PCI: bridge 0000:00:01.0 32bit mmio: [fbf00000, fcffffff]
PCI: bridge 0000:00:01.0 32bit mmio pref: [d0000000, d7ffffff]
PCI: 0000:02:00.0 reg 10 64bit mmio: [fdffc000, fdffffff]
pci 0000:02:00.0: supports D1
pci 0000:02:00.0: supports D2
PCI: bridge 0000:00:02.0 io port: [d000, dfff]
PCI: bridge 0000:00:02.0 32bit mmio: [fd000000, fdffffff]
PCI: bridge 0000:00:02.0 64bit mmio pref: [de000000, dfffffff]
PCI: bridge 0000:00:03.0 io port: [e000, efff]
PCI: bridge 0000:00:03.0 32bit mmio: [fe000000, fe9fffff]
PCI: bridge 0000:00:03.0 64bit mmio pref: [f8000000, faffffff]
PCI: 0000:07:03.0 reg 10 32bit mmio: [feaf0000, feafffff]
pci 0000:07:03.0: PME# supported from D3hot D3cold
pci 0000:07:03.0: PME# disabled
pci 0000:00:13.1: transparent bridge
PCI: bridge 0000:00:13.1 32bit mmio: [fea00000, feafffff]
bus 00 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT]
ACPI: PCI Root Bridge [PCI1] (0000:80)
PCI: 0000:80:01.0 reg 10 64bit mmio: [febfc000, febfffff]
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PME# disabled
bus 80 -> node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: Power Resource [APMF] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 32-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
system 00:05: ioport range 0x3e0-0x3e7 has been reserved
system 00:05: ioport range 0x4d0-0x4d1 has been reserved
system 00:05: ioport range 0x500-0x501 has been reserved
system 00:05: ioport range 0x800-0x87f has been reserved
system 00:05: ioport range 0x400-0x41f has been reserved
system 00:05: iomem range 0xfecc0000-0xfecc0fff could not be reserved
system 00:05: iomem range 0xfed02000-0xfed02fff has been reserved
system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved
system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved
system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x37efffff could not be reserved
system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved
pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
pci 0000:00:01.0: IO window: disabled
pci 0000:00:01.0: MEM window: 0xfbf00000-0xfcffffff
pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000d7ffffff
pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
pci 0000:00:02.0: IO window: 0xd000-0xdfff
pci 0000:00:02.0: MEM window: 0xfd000000-0xfdffffff
pci 0000:00:02.0: PREFETCH window: 0x000000de000000-0x000000dfffffff
pci 0000:00:03.0: PCI bridge, secondary bus 0000:05
pci 0000:00:03.0: IO window: 0xe000-0xefff
pci 0000:00:03.0: MEM window: 0xfe000000-0xfe9fffff
pci 0000:00:03.0: PREFETCH window: 0x000000f8000000-0x000000faffffff
pci 0000:00:13.1: PCI bridge, secondary bus 0000:07
pci 0000:00:13.1: IO window: disabled
pci 0000:00:13.1: MEM window: 0xfea00000-0xfeafffff
pci 0000:00:13.1: PREFETCH window: disabled
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:13.1: setting latency timer to 64
bus: 00 index 0 io port: [0, ffff]
bus: 00 index 1 mmio: [0, ffffffff]
bus: 01 index 0 mmio: [0, 0]
bus: 01 index 1 mmio: [fbf00000, fcffffff]
bus: 01 index 2 mmio: [d0000000, d7ffffff]
bus: 01 index 3 mmio: [0, 0]
bus: 02 index 0 io port: [d000, dfff]
bus: 02 index 1 mmio: [fd000000, fdffffff]
bus: 02 index 2 mmio: [de000000, dfffffff]
bus: 02 index 3 mmio: [0, 0]
bus: 05 index 0 io port: [e000, efff]
bus: 05 index 1 mmio: [fe000000, fe9fffff]
bus: 05 index 2 mmio: [f8000000, faffffff]
bus: 05 index 3 mmio: [0, 0]
bus: 07 index 0 mmio: [0, 0]
bus: 07 index 1 mmio: [fea00000, feafffff]
bus: 07 index 2 mmio: [0, 0]
bus: 07 index 3 io port: [0, ffff]
bus: 07 index 4 mmio: [0, ffffffff]
bus: 80 index 0 io port: [0, ffff]
bus: 80 index 1 mmio: [0, ffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
scx200: NatSemi SCx200 Driver
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
NTFS driver 2.1.29 [Flags: R/W].
JFS: nTxBlock = 7019, nTxLock = 56152
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
msgmni has been set to 1754
async_tx: api initialized (async)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: VIA PCI bridge detected.Disabling DAC.
pci 0000:01:00.0: Boot video device
pcieport-driver 0000:00:02.0: setting latency timer to 64
pcieport-driver 0000:00:02.0: found MSI capability
pci_express 0000:00:02.0:pcie00: allocate port service
pci_express 0000:00:02.0:pcie01: allocate port service
pci_express 0000:00:02.0:pcie02: allocate port service
pci_express 0000:00:02.0:pcie03: allocate port service
pcieport-driver 0000:00:03.0: setting latency timer to 64
pcieport-driver 0000:00:03.0: found MSI capability
pci_express 0000:00:03.0:pcie00: allocate port service
pci_express 0000:00:03.0:pcie01: allocate port service
pci_express 0000:00:03.0:pcie02: allocate port service
pci_express 0000:00:03.0:pcie03: allocate port service
aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [liD]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
processor ACPI0007:00: registered as cooling_device0
ACPI: Processor [P001] (supports 16 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (49 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.103
Serial: 8250/16550 driver4 ports, IRQ sharing enabled
floppy0: no floppy controllers found
brd: module loaded
loop: module loaded
Compaq SMART2 Driver (v 2.6.0)
HP CISS Driver (v 3.6.20)
input: Macintosh mouse button emulation as /class/input/input4
Uniform Multi-Platform E-IDE driver
ide-floppy driver 1.00
Loading iSCSI transport class v2.0-870.
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver 1.1-5[2456]-ms
aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= options<6>QLogic Fibre Channel HBA Driver: 8.02.01-k7
iscsi: registered transport (qla4xxx)
QLogic iSCSI HBA Driver
Emulex LightPulse Fibre Channel SCSI driver 8.2.7
Copyright(c) 2004-2008 Emulex. All rights reserved.
Failed initialization of WD-7000 SCSI card!
DC390: clustering now enabled by default. If you get problems load
with "disable_clustering=1" and report to maintainers
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.04.01 Thu July 24 11:41:51 PST 2008
GDT-HA: Storage RAID Controller Driver. Version: 3.05
3ware Storage Controller device driver for Linux v1.26.02.002.
3ware 9000 Storage Controller device driver for Linux v2.26.02.011.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.4.1 (April 24, 2007)
RocketRAID 3xxx/4xxx Controller driver v1.3 (071203)
stex: Promise SuperTrak EX Driver version: 3.6.0000.1
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
sata_via 0000:00:0f.0: version 2.3
sata_via 0000:00:0f.0: power state changed by ACPI to D0
sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
sata_via 0000:00:0f.0: routed to hard irq line 5
scsi2 : sata_via
scsi3 : sata_via
ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21
ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: CFA: SMI MODEL, 20080308, max UDMA/66
ata1.00: 7831152 sectors, multi 0: LBA
ata1.00: applying bridge limits
ata1.00: configured for UDMA/66
ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
scsi 2:0:0:0: Direct-Access ATA SMI MODEL 2008 PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 7831152 512-byte hardware sectors (4010 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sda] 7831152 512-byte hardware sectors (4010 MB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 2:0:0:0: [sda] Attached SCSI disk
sd 2:0:0:0: Attached scsi generic sg0 type 0
scsi4 : pata_legacy
ata3: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
scsi5 : pata_legacy
ata4: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
Fusion MPT base driver 3.04.07
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.07
Fusion MPT FC Host driver 3.04.07
Fusion MPT SAS Host driver 3.04.07
Intel ISA PCIC probe: not found.
Databook TCIC-2 PCMCIA probe: not found.
usbmon: debugfs is not available
ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
ehci_hcd 0000:00:10.4: EHCI Host Controller
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:10.4: debug port 1
ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbeffc00
ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
116x: driver isp116x-hcd, 03 Nov 2005
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
USB Universal Host Controller Interface driver v3.0
uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:10.0: UHCI Host Controller
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-6: new high speed USB device using ehci_hcd and address 2
uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:10.2: UHCI Host Controller
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-6: configuration #1 chosen from 1 choice
usb 1-8: new high speed USB device using ehci_hcd and address 3
uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:10.3: UHCI Host Controller
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-8: configuration #1 chosen from 1 choice
sl811: driver sl811-hcd, 19 May 2005
Initializing USB Mass Storage driver...
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver libusual
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input5
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
raid6: int32x1 117 MB/s
raid6: int32x2 164 MB/s
raid6: int32x4 167 MB/s
raid6: int32x8 121 MB/s
raid6: mmxx1 382 MB/s
raid6: mmxx2 539 MB/s
raid6: sse1x1 289 MB/s
raid6: sse1x2 437 MB/s
raid6: sse2x1 531 MB/s
raid6: sse2x2 671 MB/s
raid6: using algorithm sse2x2 (671 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
dm-devel@redhat.comcpuidle: using governor ladder
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
wbsd: Winbond W83L51xD SD/MMC card interface driver
wbsd: Copyright(c) Pierre Ossman
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
TuxOnIce 3.0-rc7 (
http://tuxonice.net)
hd: no drives specified - use hd=cyl,head,sectors on kernel command line
Marking TSC unstable due to TSC halts in idle
Clocksource tsc unstable (delta = -88981573 ns)
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04711/0xa00000
input: SynPS/2 Synaptics TouchPad as /class/input/input6
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
Replacing swsusp.
TuxOnIce: Resume= parameter is empty. Hibernating will be disabled.
XFS mounting filesystem sda1
Ending clean XFS mount for filesystem: sda1
VFS: Mounted root (xfs filesystem) readonly.
Freeing unused kernel memory: 404k freed
scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
sd 6:0:0:0: [sdb] 15527936 512-byte hardware sectors (7950 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sd 6:0:0:0: [sdb] 15527936 512-byte hardware sectors (7950 MB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
sd 6:0:0:0: [sdb] Assuming drive cache: write through
sdb: sdb1
sd 6:0:0:0: [sdb] Attached SCSI removable disk
sd 6:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
ACPI: WMI: Mapper loaded
acpi device:0a: registered as cooling_device1
input: Video Bus as /class/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
agpgart: Detected VIA P4M900 chipset
agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ieee80211_crypt: registered algorithm 'NULL'
wl: module license 'MIXED/Proprietary' taints kernel.
wl 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
wl 0000:02:00.0: setting latency timer to 64
ieee80211_crypt: registered algorithm 'TKIP'
eth0: Broadcom BCM4315 802.11 Wireless Controller 5.10.27.6
ACPI: I/O resource vt596_smbus [0x400-0x407] conflicts with ACPI region SMA1 [0x400-0x40f]
ACPI: Device needs an ACPI driver
HDA Intel 0000:80:01.0: power state changed by ACPI to D0
HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:80:01.0: setting latency timer to 64
ALSA sound/pci/hda/hda_intel.c:2111: chipset global capabilities = 0x4401
HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
ALSA sound/pci/hda/hda_intel.c:762: codec_mask = 0x1
ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model 'mobile' is selected for config 103c:3030 (HP)
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device CNF7070 (04f2:b107)
input: CNF7070 as /class/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one year, y3k, hpet irqs
tg3.c:v3.94 (August 14, 2008)
tg3 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
eth1: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:1f:29:9c:85:5e
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth1: dma_rwctrl[763f0000] dma_mask[32-bit]
TuxOnIce: Resume= parameter is empty. Hibernating will be disabled.
XFS mounting filesystem sdb1
Ending clean XFS mount for filesystem: sdb1
cpufreq: No nForce2 chipset.
longhaul: APIC detected. Longhaul is currently broken in this configuration.
eps: Detected VIA Model D C7-M
eps: Current voltage = 796mV
eps: Current multiplier = 10
eps: Highest voltage = 796mV
eps: Highest multiplier = 10
eps: Lowest voltage = 796mV
eps: Lowest multiplier = 4
powernow: This module only works with AMD K7 CPUs
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
HDA Intel 0000:80:01.0: PCI INT A disabled
HDA Intel 0000:80:01.0: power state changed by ACPI to D0
HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:80:01.0: setting latency timer to 64
ALSA sound/pci/hda/hda_intel.c:2111: chipset global capabilities = 0x4401
HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device
ALSA sound/pci/hda/hda_intel.c:762: codec_mask = 0x1
ALSA sound/pci/hda/hda_codec.c:2350: hda_codec: model 'mobile' is selected for config 103c:3030 (HP)
[drm] Initialized drm 1.1.0 20060810
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
hda-intel: Invalid position buffer, using LPIB read method instead.
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
ALSA sound/pci/hda/hda_codec.c:728: hda_codec_cleanup_stream: NID=0x3
ALSA sound/pci/hda/hda_intel.c:1408: azx_pcm_prepare: bufsize=0x10000, format=0x31
ALSA sound/pci/hda/hda_codec.c:716: hda_codec_setup_stream: NID=0x3, stream=0x5, channel=0, format=0x31
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
TKIP: RX tkey->key_idx=2 frame keyidx=1 priv=edc7b880
vector://home/david
root:#
Hopefully something will stand out and suggest some additional things to try.
Thank you all for your suggestions and assistance.
