VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: heimdal-1.4 on VL7  (Read 1093 times)

hata_ph

  • Packager
  • Vectorian
  • ****
  • Posts: 3261
  • -- Just being myself --
heimdal-1.4 on VL7
« on: April 06, 2011, 07:45:42 pm »

Have done compile heimdal-1.4 for kdelibs-4.6.1 but heimdal will broke su after install. I cannot run su in terminal anymore. If i compile heimdal with prefix=/usr/heimdal there will be no such problem...any idea?

this is my slackbuild

Quote
#!/usr/bin/bash
# This script assumes it will be launched within "/NAME/VERSION/src" dir.
# With all sources in "src" Your Vector Linux .tlz package, slack-desc,
# and slack-required will be found in "VERSION" dir. The extraction and
# build will be in a temp dir created in "NAME" dir, and then removed on exit.
# Comment out second to last line to keep this dir intact.
#
# This Template was compiled from the contributions of many users of the Vector
# Linux forum at http://forum.vectorlinux.com and from tidbits collected
# from all over the internet.
#
# Generated by sbbuilder-0.4.12.3, written by Rodrigo Bistolfi
# (rbistolfi) and Raimon Grau Cuscó (Kidd) for VectorLinux.
#
# Please put your name below if you add some original scripting lines.
# AUTHORS =

NAME="heimdal"            #Enter package Name!
VERSION=${VERSION:-"1.4"}      #Enter package Version!
VER=$(echo $VERSION|sed 's/-/_/') #this fixes - in version
VL_PACKAGER=${VL_PACKAGER:-"hata_ph"}   #Enter your Name!
LINK=${LINK:-""}  #Enter URL for package here!


#SYSTEM VARIABLES
#----------------------------------------------------------------------------
BUILDNUM=${BUILDNUM:-"1"}
VL_VERSION=${VL_VERSION:-"$(ls /var/log/packages/|grep vlconfig2|cut -d "-" -f4|cut -c 2-5)"}
BUILD=${BUILD:-"$BUILDNUM""$VL_VERSION"}
ARCH=${ARCH:-"$(uname -m)"}
CONFIG_OPTIONS=${CONFIG_OPTIONS:-""}
LDFLAG_OPTIONS=${LDFLAG_OPTIONS:-""}
ADDRB=${ADDRB:-""} #Add deps that need to be added to the slack-required file here
EXRB=${EXRB:-""} #Add deps that need to be excluded from the slack-required file here
#----------------------------------------------------------------------------


#SETUP PACKAGING ENVIRONMENT
#--------------------------------------------
CWD=$(pwd)
cd ../
RELEASEDIR=$(pwd)
cd $CWD
mkdir -p $RELEASEDIR/tmp
TMP=$RELEASEDIR/tmp
PKG=$TMP/package-$NAME
#--------------------------------------------



if [ $UID != 0 ]; then
   echo "You are not authorized to run this script. Please login as root"
   exit 1
fi

if [ ! -x /usr/bin/requiredbuilder ]; then
   echo "Requiredbuilder not installed, or not executable."
   exit 1
fi

if [ $VL_PACKAGER = "YOURNAME" ]; then
   echo 'Who are you?
   Please edit VL_PACKAGER=${VL_PACKAGER:-YOURNAME} in this script.
   Change the word "YOURNAME" to your VectorLinux packager name.
   You may also export VL_PACKAGER, or call this script with
   VL_PACKAGER="YOUR NAME HERE"'
   exit 1
fi


#CFLAGS SETUP
#--------------------------------------------
if [[ "$ARCH" = i?86 ]]; then
  ARCH=i586
  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
  CONFIGURE_TRIPLET="i486-slackware-linux"
  LIBDIRSUFFIX=""
elif [ "$ARCH" = "x86_64" ]; then
  SLKCFLAGS="-O2 -fpic"
  CONFIGURE_TRIPLET="x86_64-slackware-linux"
  LIBDIRSUFFIX="64"
elif [ "$ARCH" = "powerpc" ]; then
  SLKCFLAGS="-O2"
  CONFIGURE_TRIPLET="powerpc-vlocity-linux"
  LIBDIRSUFFIX=""
fi

export CFLAGS="$SLKCFLAGS $CFLAG_OPTIONS"
export CXXFLAGS=$CFLAGS
export LDFLAGS="$LDFLAGS $LDFLAG_OPTIONS"
#--------------------------------------------


#GET THE SOURCE
#--------------------------------------------
for SRC in $(echo $LINK);do
if [ ! -f $CWD/$(basename $SRC) ]
then
        wget -c $SRC
fi
done
#--------------------------------------------


rm -rf $PKG
mkdir -p $PKG
cd $TMP
rm -rf $NAME-$VERSION


#EXTRACT SOURCES
#-----------------------------------------------------
echo "Extracting source..."
tar xvf $CWD/$NAME-$VERSION.tar.* || exit 1
#-----------------------------------------------------


cd $TMP/$NAME-$VERSION

# Put any Patches into a patches folder in the src dir
#-----------------------------------------------------
for i in $CWD/patches/*;do
   patch -p1 <$i
done
#-----------------------------------------------------


#SET PERMISSIONS
#-----------------------------------------
echo "Setting permissions..."
chown -R root:root .
find . -perm 664 -exec chmod 644 {} \;
find . -perm 777 -exec chmod 755 {} \;
find . -perm 2777 -exec chmod 755 {} \;
find . -perm 775 -exec chmod 755 {} \;
find . -perm 2755 -exec chmod 755 {} \;
find . -perm 774 -exec chmod 644 {} \;
find . -perm 666 -exec chmod 644 {} \;
find . -perm 600 -exec chmod 644 {} \;
find . -perm 444 -exec chmod 644 {} \;
find . -perm 400 -exec chmod 644 {} \;
find . -perm 440 -exec chmod 644 {} \;
find . -perm 511 -exec chmod 755 {} \;
find . -perm 711 -exec chmod 755 {} \;
find . -perm 555 -exec chmod 755 {} \;
#-----------------------------------------



#CONFIGURE & MAKE
#----------------------------------------------------------------------
# If you are building a KDE-related app, then change the following
# arguments in the script below:
# --prefix=$(kde-config -prefix) \
# --sysconfdir=/etc/kde \
#
# Making these changes will ensure that your package will build in the
# correct path and that it will work seamlessly within the KDE environment.
#
#-----------------------------------------------------------------------

echo "Configuring source..."
./configure --prefix=/usr/heimdal \
  --libdir=/usr/lib${LIBDIRSUFFIX} \
  --infodir=/usr/info \
  --sysconfdir=/etc \
  --localstatedir=/var \
  --mandir=/usr/man \
  --enable-shared=yes \
  --enable-kcm \
  --program-prefix="" \
  --program-suffix="" \
  --build=$CONFIGURE_TRIPLET \
  $CONFIG_OPTIONS || exit 1

make || exit 1

make install DESTDIR=$PKG || exit


#######################################################################
#Miscellenious tweaks and things outside a normal ./configure go here #
#######################################################################

rm -rf $PKG/usr/man/cat?   # We don't want these

# Add sample krb5.conf file (may not be needed)
mkdir -p $PKG/etc
cat $CWD/config/krb5.conf > $PKG/etc/krb5.conf-sample.new

# Create directory for the KDC to use
mkdir -p $PKG/var/heimdal

# Add sample kdc.conf file (may not be needed)
cat $CWD/config/kdc.conf > $PKG/var/heimdal/kdc.conf-sample.new

# Include a KDC rc-file for the admin to consider
mkdir -p $PKG/etc/rc.d
cat $CWD/config/rc.heimdal > $PKG/etc/rc.d/rc.heimdal.new

# Add heimdal to INFOPATH, MANPATH, and PATH
mkdir -p $PKG/etc/profile.d
cat $CWD/config/heimdal.sh > $PKG/etc/profile.d/heimdal.sh.new
cat $CWD/config/heimdal.csh > $PKG/etc/profile.d/heimdal.csh.new

mkdir -p $PKG/usr/doc/$NAME-$VERSION
cp -a ANNOUNCE* AUTHORS* BUGS* COPYING* ChangeLog* CHANGELOG* Credits* DEVELOPERS \
LICENSE* MANIFEST PROVENANCE README* TODO* Exception_to_GPL_for_Qt.txt \
$PKG/usr/doc/$NAME-$VERSION
cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild

#----------------------------------------------------------------------

if [ -d $PKG/usr/share/man ] ; then
mkdir -p $PKG/usr/man
mv $PKG/usr/share/man/* $PKG/usr/man
rm -rf $PKG/usr/share/man
fi
find $PKG/usr/man -type f -exec gzip -9 {} \;

if [ -d $PKG/usr/share/info ] ; then
mkdir -p $PKG/usr/info
mv $PKG/usr/share/info/* $PKG/usr/info
rm -rf $PKG/usr/share/info
fi

find $PKG/usr/info -type f -exec gzip -9 {} \;
mkdir -p $PKG/install
if [ -d $PKG/usr/info ] ; then
cat >> $PKG/install/doinst.sh << EOF
CWD=\$(pwd)
cd usr/info
if [ -f dir ];then
    rm dir
fi
if [ -f dir.gz ];then
    rm dir.gz
fi
for i in *.info.gz;do
        install-info \$i dir
done
cd \$CWD
EOF
fi

# Add schemas install to the doinst.sh if schemas are found.
[ -d $PKG/etc/gconf/schemas ] && {
# Make sure we have gconftool installed
echo "if [ -x usr/bin/gconftool-2 ]; then" >> $PKG/install/doinst.sh
( cd $PKG/etc/gconf/schemas
for schema in *.schemas; do
 # Install schemas
 echo "GCONF_CONFIG_SOURCE=\"xml::etc/gconf/gconf.xml.defaults\" \
   usr/bin/gconftool-2 --makefile-install-rule \
   etc/gconf/schemas/${schema} >/dev/null 2>&1" \
   >> $PKG/install/doinst.sh
done;
)
# Finish off gconf block
echo "fi" >> $PKG/install/doinst.sh
}

mkdir -p $PKG/install
cat >> $PKG/install/doinst.sh << EOF
# update rarian database
if [ -x usr/bin/rarian-sk-update ]; then
  usr/bin/rarian-sk-update 1> /dev/null 2> /dev/null
fi

# update mime database
if [ -x usr/bin/update-mime-database ]; then
  usr/bin/update-mime-database usr/share/mime 1> /dev/null 2> /dev/null
fi

# update desktop entries
if [ -x usr/bin/update-desktop-database ]; then
  usr/bin/update-desktop-database 1> /dev/null 2> /dev/null
fi

# update hicolor icons
if [ -e usr/share/icons/hicolor/icon-theme.cache ]; then
   rm -f usr/share/icons/hicolor/icon-theme.cache
fi
usr/bin/gtk-update-icon-cache -f -q usr/share/icons/hicolor 1>/dev/null 2>/dev/null

# Restart gconfd-2 if running to reload new gconf settings
if ps acx | grep -q gconfd-2 ; then
        killall -HUP gconfd-2 ;
fi

EOF
cat $CWD/doinst.sh > $PKG/install/doinst.sh

#if there is a slack-desc in src dir use it
if test -f $CWD/slack-desc; then
cp $CWD/slack-desc $RELEASEDIR/slack-desc
else
# This creates the white space in front of "handy-ruler" in slack-desc below.

LENGTH=$(expr length "$NAME")
SPACES=0
SHIM=""
until [ "$SPACES" = "$LENGTH" ]; do
SHIM="$SHIM "
let SPACES=$SPACES+1
done

# Fill in the package summary between the () below.
# Then package the description, License, Author and Website.
# There may be no more then 11 $NAME: lines in a valid slack-desc.

cat > $RELEASEDIR/slack-desc << EOF
# HOW TO EDIT THIS FILE:
# The "handy ruler" below makes it easier to edit a package description.  Line
# up the first '|' above the ':' following the base package name, and the '|'
# on the right side marks the last column you can put a character in.  You must
# make exactly 11 lines for the formatting to be correct.  It's also
# customary to leave one space after the ':'.

$SHIM|-----handy-ruler------------------------------------------------------|
$NAME: $NAME (a free implementation of Kerberos 5)
$NAME:
$NAME: Heimdal is an implementation of Kerberos 5 (and some more stuff)
$NAME: largely written in Sweden (which was important when we started writing
$NAME: it, less so now).
$NAME:
$NAME:
$NAME: License: Refer to LICENSE
$NAME: Authors: http://www.h5l.org/
$NAME: Website: http://www.h5l.org/

EOF
fi
cat >> $RELEASEDIR/slack-desc << EOF



#----------------------------------------
BUILDDATE: $(date)
PACKAGER:  $VL_PACKAGER
HOST:      $(uname -srm)
DISTRO:    $(cat /etc/vector-version)
CFLAGS:    $CFLAGS
LDFLAGS:   $LDFLAGS
CONFIGURE: $(awk "/\.\/configure\ /" $TMP/$NAME-$VERSION/config.log)

EOF

cat $RELEASEDIR/slack-desc > $PKG/install/slack-desc

#STRIPPING
#------------------------------------------------------------------------------------------------------------------
cd $PKG
echo " "
echo "Stripping...."
echo " "
find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
#------------------------------------------------------------------------------------------------------------------


#FINISH PACKAGE
#--------------------------------------------------------------
echo "Finding dependencies..."
ADD="$ADDRB" EXCLUDE="$EXRB" requiredbuilder -v -y -s $RELEASEDIR $PKG
echo "Creating package $NAME-$VERSION-$ARCH-$BUILD.txz"
makepkg -l y -c n $RELEASEDIR/$NAME-$VERSION-$ARCH-$BUILD.txz

cd $CWD
echo "Cleaning up temp files..." && rm -rf $TMP
echo "Package Complete"
#--------------------------------------------------------------

# vim: set tabstop=4 shiftwidth=4 foldmethod=marker : ##
Logged