Motorola Phone (V3r)

[raleeha]

hi,
when i try to install a motorola  razr v3 mobile phone i get error messages below..and it said please visit www.linmodem.org..after i looked up in google i found out that there is an moto4lin package but its not suitable for slackware i think..so i just going to ask you if there any possibility to get this mobile phone work on this vl 7.0 ?

many thanks for reading this

Code:

usb 4-1: Product: Motorola Phone (V3r)
[  579.764025] usb 4-1: Manufacturer: Motorola Inc.
[  579.782028] cdc_acm 4-1:1.0: ttyACM0: USB ACM device
[  617.905206] usb 4-1: USB disconnect, address 8
[  622.873453] usb 3-2: new full speed USB device using uhci_hcd and address 2
[  623.067564] usb 3-2: New USB device found, idVendor=22b8, idProduct=4902
[  623.067564] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  623.067564] usb 3-2: Product: Motorola Phone (V3r)
[  623.067564] usb 3-2: Manufacturer: Motorola Inc.
[  623.081565] cdc_acm 3-2:1.0: ttyACM0: USB ACM device
[  624.904144] usb 3-2: USB disconnect, address 2
[  627.992698] usb 3-2: new full speed USB device using uhci_hcd and address 3
[  628.185817] usb 3-2: New USB device found, idVendor=22b8, idProduct=4902
[  628.185817] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  628.185817] usb 3-2: Product: Motorola Phone (V3r)
[  628.185817] usb 3-2: Manufacturer: Motorola Inc.
[  628.197818] cdc_acm 3-2:1.0: ttyACM0: USB ACM device
[  632.403001] usb 3-2: USB disconnect, address 3
[  633.608815] usb 3-2: new full speed USB device using uhci_hcd and address 4
[  633.721800] usb 3-2: device descriptor read/64, error -71
[  633.934761] usb 3-2: device descriptor read/64, error -71
[  634.137736] usb 3-2: new full speed USB device using uhci_hcd and address 5
[  634.249719] usb 3-2: device descriptor read/64, error -71
[  634.462687] usb 3-2: device descriptor read/64, error -71
[  634.665654] usb 3-2: new full speed USB device using uhci_hcd and address 6
[  635.073593] usb 3-2: device not accepting address 6, error -71
[  635.124585] hub 3-0:1.0: unable to enumerate USB device on port 2
[  643.137356] usb 3-2: new full speed USB device using uhci_hcd and address 8
[  643.338494] usb 3-2: New USB device found, idVendor=22b8, idProduct=4902
[  643.338494] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[  643.338494] usb 3-2: Product: Motorola Phone (V3r)
[  643.338494] usb 3-2: Manufacturer: Motorola Inc.
[  643.353487] cdc_acm 3-2:1.0: ttyACM0: USB ACM device

Code:

Bus 003 Device 008: ID 22b8:4902 Motorola PCS Triplet GSM Phone (AT)

[stretchedthin]

There is a program called wammu in the repository.  It can be installed by gslapt. 

According to this webpage http://wammu.eu/phones/motorola/
It has the following support for your phone.
Motorola razr v3    at115200    info, sms, phonebook, enhancedphonebook, filesystem

Let me know how it works out for you.  I built the wammu/gammu package for the repositories and I think this is the first opportunity to have it tested.
Thanks.

[raleeha]

many thx for let me know about software called wammu

i tried to download it but i got http response error maybe i picked wrong repository

will try it again

greetings ralleha

[stretchedthin]

raleeha

Http: response errors usually occur if something has been moved or changed in the repository since your last update.

Try this.
as root run
rm /home/ftp/pub/veclinux/packages/package_data

Then update gslapt.

Then try wammu again. I downloaded here, seemed fine.

[raleeha]

@stretchedthin

yes thx this work well, but i get some trouble with wxPython package...

Code:

wammu
Traceback (most recent call last):
  File "/usr/bin/wammu", line 31, in <module>
    import Wammu.Locales
  File "/usr/lib/python2.7/site-packages/Wammu/Locales.py", line 31, in <module>
    import wx
ImportError: No module named wx

Code:

python
Python 2.7.1 (r271:86832, Feb  5 2011, 21:16:28)
[GCC 4.5.2] on linux2
Type "help", "copyright", "credits" or "license" for more information.
>>> import wx
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
ImportError: No module named wx

seems i need try to reinstall wxPython

raleeha

[raleeha]

ok did the downgrade of wxPython package (had to know that slackware packages dont compatible with vector packages )

[hata_ph]

raleeha,

you install/update wxPython from non VL repo?

[pierce.jason]

Out of curiosity, what are you trying to do with the phone? Use it as a DUN modem? Transfer data(pictures) to/from it?

[raleeha]

@pierce.jason yes transer pictures to usb device

@hata_ph yes this package was installed from a slackware mirror, thats why it dont work

[hata_ph]

it will be a bit dangerous to install pkgs from non VL repo

[stretchedthin]

@raleeha
Did you get it all straightened out.  How did the wammu package work for you?

[raleeha]

@stretchedthin

sorry for the delay...but i got some problems to recognize the phone...think its not a problem about wammu but about the phone..mhh strange...lsusb shows me the phone