VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: Clock  (Read 1142 times)

syncdram

  • Member
  • *
  • Posts: 84
Clock
« on: June 13, 2012, 10:06:04 am »

This is a problem i have with my vector partition only. Every time i boot into vector 7 the time is wrong. I have to go back into vsam and reset the time. Then log in and out for the time to be correct. If i leave the vector partition and come back or reboot into the vector partition i must reset the time in the same fashion.  All other partitions are fine which eliminates the battery on the mother board failing. Does anybody know were else i can look to fix this problem?
Logged

MarkGrieveson

  • Vectorian
  • ****
  • Posts: 531
Re: Clock
« Reply #1 on: June 13, 2012, 11:09:34 am »

Perhaps resetting the time on your computer via the bios before you boot into the Vector partition would help.
Logged
I am using VL7.0 standard with XFCE

stretchedthin

  • Administrator
  • Vectorian
  • *****
  • Posts: 3780
    • Opensourcebistro.com
Re: Clock
« Reply #2 on: June 13, 2012, 09:14:56 pm »

Also, when in vasm, check where your time zone is set. (ZONESET in vasm)
Try switching between local time and utc.

May help.
Logged
Vectorlinux screencasts and  tutorials can be found at....
http://www.opensourcebistro.com/blog1
http://www.youtube.com/user/vid4ken?feature=mhee

syncdram

  • Member
  • *
  • Posts: 84
SOLVED Re: Clock
« Reply #3 on: June 14, 2012, 04:58:58 am »

Thanks for the suggestions, changing local time to utc worked. It also changed the time immediately.  Re checked by rebooting and time is correct.
Logged