VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: Installed Tonight  (Read 5700 times)

rokytnji

  • Vectorite
  • ***
  • Posts: 101
  • Linux Friganeer
    • Yet Another Technology Site
Installed Tonight
« on: September 05, 2012, 10:04:28 pm »

Amrel Rt 786 Ex Toughbook. Dist-upgrade killed my previous install of AntiX 12 on this Hardrive. But it is not like I don't have another AntiX core install LXDE Hard Drive I can slap into here when needed (caddies are hot swappable, core install is in link picture above). I shoulda paid more attention because I fixed the breakage on the core install but snafued the full install. I know. Confusing.  ::)

Code: [Select]
$ inxi -Fxz
System:    Host: biker.shop.net Kernel: 3.0.8 i686 (32 bit, gcc: 4.5.2)
           Desktop: Xfce 4.8.3 (Gtk 2.24.1) Distro: Slackware 13.37.0
Machine:   System: Intel (portable) product: Montara Family of Chipsets
           Mobo: Phoenix model: RT786EX version: 41118 Bios: Phoenix version: MGM-ALL1.86C.1009.D.0604271130 date: 04/27/06
CPU:       Single core Intel Pentium M (-UP-) cache: 2048 KB flags: (sse sse2) bmips: 3189.43 clocked at 1600.00 MHz
Graphics:  Card: Intel 82852/855GM Integrated Graphics Device bus-ID: 00:02.0
           X.Org: 1.9.5 driver: vesa Resolution: 1024x768@61.0hz
           GLX Renderer: Rasterizer GLX Version: 2.1 Mesa 7.10.2 Direct Rendering: Yes
Audio:     Card: Intel 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller driver: Intel ICH ports: 1c00 18c0 bus-ID: 00:1f.5
           Sound: Advanced Linux Sound Architecture ver: 1.0.24
Network:   Card-1: Realtek RTL-8139/8139C/8139C+ driver: 8139too ver: 0.9.28 port: 2000 bus-ID: 02:09.0
           IF: eth0 state: down mac: <filter>
           Card-2: Atheros Atheros AR5001X+ Wireless Network Adapter driver: ath5k bus-ID: 07:00.0
           IF: wlan0 state: up mac: <filter>
Drives:    HDD Total Size: 20.0GB (20.4% used) 1: id: /dev/sda model: IBM size: 20.0GB
Partition: ID: / size: 18G used: 3.8G (23%) fs: ext3 ID: swap-1 size: 0.88GB used: 0.04GB (5%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 46.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 134 Uptime: 1:24 Memory: 324.5/485.8MB Runlevel: 4 Gcc sys: 4.5.2 Client: Shell inxi: 1.8.14

I won't bug this forum with any questions. I'll poke and mosey around on my own.  Just thought I learn me something different. Happy Trails, Rok

hata_ph

  • Packager
  • Vectorian
  • ****
  • Posts: 3261
  • -- Just being myself --
Re: Installed Tonight
« Reply #1 on: September 05, 2012, 10:39:25 pm »

Welcome :)
Logged

nightflier

  • Administrator
  • Vectorian
  • *****
  • Posts: 4085
Re: Installed Tonight
« Reply #2 on: September 06, 2012, 03:25:56 am »

Welcome, and thanks for showing a cool utility.  :)
Logged

rokytnji

  • Vectorite
  • ***
  • Posts: 101
  • Linux Friganeer
    • Yet Another Technology Site
Re: Installed Tonight
« Reply #3 on: September 06, 2012, 02:11:45 pm »

Liked Vector so much. I blew away a AntiX 11 partition I had on this quad booter IBM M41 Desktop. Menu entry in legacy grub is AntiX 12 which boots everything up from mbr. This is a dual drive ide Desktop with Linux installed on /dev/sda and /dev/sdb.

Code: [Select]
title antiX at sda1, kernel 3.3.5-antix.1-486-smp
kernel /boot/vmlinuz-3.3.5-antix.1-486-smp root=/dev/sda1 nomce quiet nosplash nouveau.modeset=0 vga=791
initrd /boot/initrd.img-3.3.5-antix.1-486-smp     #####this is grub legacy installed to /dev/sda1 mbr#####
boot

title Semplice GNU/Linux, with Linux 3.2.0-3-486
rootnoverify (hd1,1)
chainloader +1   #######this is grub 2 installed to root folder########

title Vector STD Gold 7 at /dev/sda2
rootnoverify (hd0,1)
chainloader +1  #######this is lilo installed to /etc/lilo.conf#########

title Puppy Linux 529 frugal in sdb1 dir macpup529frugal
rootnoverify (hd1,0)                 #####frugal install with save file#########
kernel /macpup529frugal/vmlinuz pmedia=atahd psubdir=macpup529frugal
initrd /macpup529frugal/initrd.gz

Code: [Select]
$ inxi -Fxz
System:    Host: biker.shop.net Kernel: 3.0.8 i686 (32 bit, gcc: 4.5.2)
           Desktop: Xfce 4.8.3 (Gtk 2.24.1) Distro: Slackware 13.37.0
Machine:   System: IBM product: 679421U
           Mobo: IBM model: IBM Bios: IBM version: 20KT46AUS date: 06/04/2004
CPU:       Single core Intel Pentium 4 CPU (-UP-) cache: 256 KB flags: (sse sse2) bmips: 3588.59 clocked at 1794.295 MHz
Graphics:  Card: nVidia NV6 [Vanta/Vanta LT] bus-ID: 01:00.0
           X.Org: 1.9.5 drivers: nouveau (unloaded: nv,vesa) Resolution: 1024x768@85.0hz
           GLX Renderer: Mesa DRI nv05 20091015 x86/MMX/SSE2 GLX Version: 1.2 Mesa 7.10.2 Direct Rendering: Yes
Audio:     Card: Intel 82801BA/BAM AC'97 Audio Controller driver: Intel ICH ports: 1c00 1840 bus-ID: 00:1f.5
           Sound: Advanced Linux Sound Architecture ver: 1.0.24
Network:   Card: Intel 82801BA/BAM/CA/CAM Ethernet Controller driver: e100 ver: 3.5.24-k2-NAPI port: 2000 bus-ID: 02:08.0
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: <filter>
Drives:    HDD Total Size: 100.1GB (11.9% used) 1: id: /dev/sda model: SAMSUNG_SV6003H size: 60.1GB
           2: id: /dev/sdb model: IC35L040AVVA07 size: 40.0GB
Partition: ID: / size: 31G used: 3.8G (14%) fs: ext3 ID: swap-1 size: 0.81GB used: 0.00GB (0%) fs: swap
           ID: swap-2 size: 1.17GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 28.0C mobo: N/A
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 135 Uptime: 2:43 Memory: 342.5/1128.7MB Runlevel: 4 Gcc sys: 4.5.2 Client: Shell inxi: 1.8.14

Did some tweaking a little. Listening to "into the mouth of hell, by Trivium" in gnome-mplayer via Chronix radio stream .pls while setting/tweaking this baby up.

http://i49.tinypic.com/28qrgh4.jpg

Thanks for the warm welcomes. Happy Trails, Rok

Edit: In case anyone wants the wallpaper. I uploaded it here.

http://ompldr.org/vZmQ1Ng/2lmx8xh.jpg
« Last Edit: September 06, 2012, 02:37:15 pm by rokytnji »
Logged

hata_ph

  • Packager
  • Vectorian
  • ****
  • Posts: 3261
  • -- Just being myself --
Re: Installed Tonight
« Reply #4 on: September 06, 2012, 06:40:21 pm »

Nice :)
Logged