Just rambling commands and package installs

[rokytnji]

Just some commands I use

[rokytnji]

Lets try this again. Wireless commands I use for info.

Code:

echo uname: && uname -a -m -p && echo lspci: && lspci -knn && echo lsusb: && lsusb && echo lsusb -t: && lsusb -t && echo lsmod: && lsmod && echo ifconfig: && ifconfig && echo ifconfig -a: && ifconfig -a && echo iwconfig: && iwconfig && echo resolv.conf: && cat /etc/resolv.conf && echo route: && route -n && echo ip link show: && ip link show && dmesg | grep firmware: && dmesg | grep firmware

Above command must be ran as root or sudo in terminal to get all relevant info.

lshw and hwinfo must be installed before running below commands in Vector 7 Std Gold. You won't find them in Gslapt in Vector 7.

hwinfo-13.57-i686-1jsc.tgz

lshw-B.02.16-i686-1cf.txz


Commands I use are

Code:

lshw -C network

Code:

su -c "hwinfo --wlan"

Code:

su -c "hwinfo --netcard"

Happy Trails, Rok

[Chris530]

Thanks Rok and keep ramblin.

[rokytnji]

Thanks Rok and keep ramblin.

Alrighty then, for wireless

Code:

dmesg|grep wlan0

Code:

readlink /sys/class/net/wlan0/device/driver/module

For wired

Code:

dmesg|grep eth0

Code:

readlink /sys/class/net/eth0/device/driver/module

Code:

whereis ifconfig
ifconfig: /sbin/ifconfig /usr/man/man8/ifconfig.8.gz /usr/share/man/man8/ifconfig.8.gz /usr/X11/man/man8/ifconfig.8.gz

[rokytnji]

I don't know if any Vector Linux members know of this search engine. So just posting the link here.

It makes a good bookmark.

http://www.linuxidx.com/linux.php/linux.php?q=

Edit: as of Today. 12June2013. That link does not function properly. Sad day for me.

[rokytnji]

How to find if your computer supports a linux pae kernel

Code:

grep pae /proc/cpuinfo

If you get nothing on the  read out. You probably don't have a cpu that supports a pae kernel. Mine for a reference.

Code:

$ grep pae /proc/cpuinfo
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc up pebs bts pni dtes64 monitor ds_cpl cid cx16 xtpr pdcm lahf_lm

shows that this box (my M/C shop media center Emachine 3407 Desktop)  supports a linux pae kernel.

[rokytnji]

Just uploading some mtu's and .pls and .asx stuff so I can find later. Anybody else is welcome to them. I keep the extracted streaming folder in ~/Music. It's a bit of a mess though (duplicate .tar and stuff).

[rokytnji]

You can get a nice progress bar for dd by using the pv command. If pv isn't installed, it should be in the repository.

Code:

pv -tpreb [fullpathandfilenameoftheiso] | dd bs=4M conv=sync of=/dev/sdx

To record my desktop (change 1366x768 to your screen resolution eg; 1024x768)

with sound

Code:

ffmpeg -f alsa -ac 2 -i hw:0,0 -f x11grab -s 1366x768 -r 25 -i :0.0 -sameq /home/username /Video/test2.avi

without sound. Below command just puts video in /home

Code:

ffmpeg -f x11grab -s 1366x768 -r 24 -an -threads 2 -sameq -i :0.0 screencast.avi

or below command puts video in ~/Video directory in /home

Code:

ffmpeg -f x11grab -s 1366x768 -r 25 -i :0.0 -sameq /home/username/Video/my-video.avi

find the space consuming files on the partition

Code:

du -sxh /*

[overthere]

Thanks ...ramble on 

[rokytnji]

Code:

# .conkyrc
background yes
update_interval 3
update_interval_on_battery 30
double_buffer yes
alignment top_right
gap_x 16
gap_y 40
maximum_width 256
own_window yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
own_window_argb_visual yes
own_window_argb_value 69
default_color ivory
color7 green
color8 yellow
color9 red
default_bar_size 120 12
show_graph_scale yes
use_xft yes
xftalpha 0.5
xftfont DejaVu Sans:size=10
font DejaVu Sans:size=10
override_utf8_locale yes
top_name_width 10
use_spacer left
format_human_readable yes
pad_percents 2
short_units yes
if_up_strictness address
TEXT
${image ~/slackware-silver.png -p 7,2 -s 250x40}
${voffset 15}
${color cyan}${alignc}${time %A %B %d, %Y} PST
${alignc}${utime %A %B %d, %Y %R} UTC${color}
#
## System
#
${font size=11}${color coral}System ${hr 1}${font}${color}
Machine${alignr}${color cyan}$nodename${color}
Kernel${alignr}${color cyan}$sysname $kernel | $machine${color}
OS${alignr}${color cyan}${execi 86400 cat /etc/slackpkg/mirrors | grep -v '#' | cut -d'/' -f5}${color}
Uptime${alignr}${color Cyan}$uptime${color}
Battery${if_match ${battery_percent}>=92}${alignr}${color forest green}${battery_bar}${color}\
${else}${if_match ${battery_percent}>=30}${alignr}${color yellow}${battery_bar}${color}\
${else}${alignr}${color red}${battery_bar}${color}${endif}${endif}
${voffset -16}${alignr 40}${color white}${battery_percent}%${color}
#
## CPU
#
${font size=11}${color coral}CPU ${hr 1}${font}${color}
${color cyan}${execi 86400 cat /proc/cpuinfo | cat /proc/cpuinfo | grep 'model name' -m1 | cut -d':' -f2 | cut -b2- | sed -e 's/([^()]*)//g' -e 's/  */ /g' -e 's/ *$//'
}${color}
#
Core0 ${color Cyan}${freq_g 1}GHz ${color blue}${cpubar 12,117 cpu0} \
${alignr}${execpi 6 sensors | grep "Core 0:" | cut -d"+" -f2 | cut -b1-2 | xargs sh ~/colorize_cpu_temps.sh}\
${execi 86400 echo $'\302\260'}C${color}
${voffset -16}${alignc -40}${color white}${cpu cpu0}%${color}
#
Core1 ${color Cyan}${freq_g 2}GHz ${color blue}${cpubar 12,117 cpu1} \
${alignr}${execpi 6 sensors | grep "Core 1:" | cut -d"+" -f2 | cut -b1-2 | xargs sh ~/colorize_cpu_temps.sh}\
${execi 86400 echo $'\302\260'}C${color}
${voffset -16}${alignc -40}${color white}${cpu cpu1}%${color}
#
${color blue}${loadgraph 30,252 FFFF00 0000FF -t}
${voffset -31}${alignc}${color white}${loadavg 1}${color}${voffset 8}
#
## Hard Drive
#
${font size=11}${color coral}Hard Drive ${hr 1}${color}${font}
${color cyan}${execi 86400 sudo /usr/sbin/hddtemp /dev/sda | cut -d':' -f2 | cut -b2-18} \
${execi 86400 sudo /usr/sbin/hdparm -I /dev/sda | grep 'M = 1000' | cut -b53-60}\
${alignr}${execpi 6 sudo /usr/sbin/hddtemp -n /dev/sda | xargs sh ~/colorize_hd_temps.sh}\
${execi 86400 echo $'\302\260'}C${color}
#
${color blue}${diskiograph sda 30,252 FFFF00 0000FF -t}
${voffset -31}${alignc}${color white}${diskio sda}${voffset 12}
#
${font DejaVu Sans Mono:size=10}root${alignr}${color cyan}${fs_size /} ${color blue}${fs_bar /}${color}
${voffset -16}${color white}${alignr 45}${fs_used /}${alignr 10}${fs_used_perc /}%${color}
home${alignr}${color cyan}${fs_size /home} ${color blue}${fs_bar /home}${color}
${voffset -16}${color white}${alignr 45}${fs_used /home}${alignr 10}${fs_used_perc /home}%${color}
share${if_mounted /home/share}\
${alignr}${color cyan}${fs_size /home/share} ${color blue}${fs_bar /home/share}${color}
${voffset -16}${color white}${alignr 45}${fs_used /home/share}${alignr 10}${fs_used_perc /home/share}%${color}\
${else}${alignr}${color cyan}Not Mounted${color}${endif}
slackware${if_mounted /home/slackware}\
${alignr}${color cyan}${fs_size /home/slackware} ${color blue}${fs_bar /home/slackware}${color}
${voffset -16}${color white}${alignr 45}${fs_used /home/slackware}${alignr 10}${fs_used_perc /home/slackware}%${color}\
${else}${alignr}${color cyan}Not Mounted${color}${endif}${font}
## Memory
${font size=11}${color coral}Memory ${hr 1}${color}${font}
${memmax}${alignr}${color cyan}${mem} ${color blue}${membar}
${voffset -16}${alignr 40}${color white}${memperc}%
${swapmax}${alignr}${color cyan}${swap} ${color blue}${swapbar}
${voffset -16}${alignr 40}${color white}${swapperc}%
#
## Top Processes
#
${font size=11}${color coral}Top Processes ${hr 1}${color}${font}
Processes:${color cyan}${running_processes}/${processes}${color}${goto 145}Threads:${color cyan}${running_threads}/${threads}${color}
${font DejaVu Sans Mono:size=10}\
Name${goto 110}CPU${alignr}Memory Usage${color hot pink}
${top name 1}${top cpu 1}%${alignr}${top mem_res 1}${top mem 1}%${color cyan}
${top name 2}${top cpu 2}%${alignr}${top mem_res 2}${top mem 2}%
${top name 3}${top cpu 3}%${alignr}${top mem_res 3}${top mem 3}%
${top name 4}${top cpu 4}%${alignr}${top mem_res 4}${top mem 4}%
${top name 5}${top cpu 5}%${alignr}${top mem_res 5}${top mem 5}%${color}${font}
#
## NetWork
#
${font size=11}${color coral}Network ${hr 1}${color}${font}
External${goto 152}${color cyan}${execi 21600 wget -O - http://ip.tupeux.com | tail}${color}
Gateway${goto 152}${color cyan}${gw_ip}${color}
DNS Server${goto 152}${color cyan}${nameserver}${color}
${if_up wlan0}\
IP Address${goto 152}${color cyan}${addr wlan0}${color}
Wifi Quality:${color cyan}${wireless_link_qual wlan0}${alignr}${color blue}${wireless_link_bar wlan0}${color}
${voffset -16}${alignr 40}${color white}${wireless_link_qual_perc wlan0}%
Best:${color cyan}${wireless_link_qual_max wlan0}${color}${goto 120}Bit Rate: ${color cyan}${wireless_bitrate wlan0}${color}
Down:${color cyan}${downspeed wlan0}${color}${goto 140}Up:${color cyan}${upspeed wlan0}${color}
${color blue}${downspeedgraph wlan0 30,120 FFFF00 0000FF -t}${alignr}${upspeedgraph wlan0 30,120 FFFF00 0000FF -t}${color}
${else}\
${if_up eth0}\
IP Address${goto 152}${addr eth0}
Down:${color cyan}${downspeed eth0}${color}${goto 140}Up:${color cyan}${upspeed eth0}${color}
${color blue}${downspeedgraph eth0 30,120 FFFF00 0000FF -t}${alignr}${upspeedgraph eth0 30,120 FFFF00 0000FF -t}${color}
${endif}\
${else}NetWork Down${endif}\
${endif}

just one .conkyrc I use.

[rokytnji]

Code:

######################
# - Conky settings - #
######################
update_interval 1
total_run_times 0
net_avg_samples 1
cpu_avg_samples 1

imlib_cache_size 0
double_buffer yes
no_buffers yes

#####################
# - Text settings - #
#####################
use_xft yes
xftfont Ubuntu:size=9
override_utf8_locale yes
text_buffer_size 2048

#############################
# - Window specifications - #
#############################
own_window_class Conky
own_window yes
own_window_type override
own_window_transparent yes
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
#own_window_argb_visual yes
#own_window_argb_value 100

alignment tl
#alignment tr
gap_x -2
gap_y 40
minimum_size 350 300


default_bar_size 60 8

#########################
# - Graphics settings - #
#########################
draw_shades no

#default_color efefef
#default_shade_color 1d1d1d
#color0 ffffff
#color1 ffffff
#color2 ffffff

default_color ff9900
default_shade_color 1d1d1d
color0 ffffff
color1 ffffff
color2 ffffff


#lua_load ~/.conky/conkybg.lua
#lua_draw_hook_pre conky_draw_bg

TEXT
${voffset 5}
${goto 92}CPU1  Perc used: ${font Ubuntu:style=Bold:size=9}${color1}${cpu cpu1}%${font}${color} ${alignr 15}Temp: ${color1}${font Ubuntu:style=Bold:size=9}${color1}${execi 30 sensors | grep 'Core0' | cut -c15-16}°C${color}${font}  

${goto 92}CPU2  Perc used: ${font Ubuntu:style=Bold:size=9}${color1}${cpu cpu2}%${font}${color} ${alignr 15}Temp: ${font Ubuntu:style=Bold:size=9}${color1}${execi 30 sensors | grep 'Core1' | cut -c15-16}°C${color}${font}  
${goto 92}${font Ubuntu:style=Bold:size=9}${color}$sysname $kernel
${goto 92}BATT:${font Ubuntu:style=Bold:size=9}${color}${battery_percent BAT1}% ${battery_time BAT1}
${goto 92}WEATHER:${execi 300 /home/harry/.weather.sh 79772}
${goto 92}RAM:${color1} ${font Ubuntu:style=Bold:size=9}${memperc}%${font}${color}${font Ubuntu:style=Bold:size=9}${font}     Free: ${font Ubuntu:style=Bold:size=9}${color2}${memeasyfree}${color} ${font}${alignr 22}Used: ${font Ubuntu:style=Bold:size=9}${color2}${mem}${color}${font}
${goto 92}${color}RUNNING:${font Ubuntu:style=Bold:size=9}${color}$processes ${font Ubuntu:style=Bold:size=9} ${color}running: ${color}$running_processes

${goto 92}HDD /:${color1} ${font Ubuntu:style=Bold:size=9}${fs_used_perc /}%${font}${color}      Free: ${color2}${font Ubuntu:style=Bold:size=9}${fs_free /}${color}${font} ${alignr 22}          Used: ${font Ubuntu:style=Bold:size=9}${color2}${fs_used /}${color}${font}
${goto 92}${font Ubuntu:style=Bold:size=9}HDD:${color1} ${fs_used_perc /home}%${font}${color}          Free: ${color2}${font Ubuntu:style=Bold:size=9}${fs_free /home}${color}${font} ${alignr 22}          Used: ${font Ubuntu:style=Bold:size=9}${color2}${fs_used /home}${color}${font}

${if_up wlan0}
${voffset -4}${goto 92}${voffset -6}Upload: ${font Ubuntu:style=Bold:size=9}${color1}${upspeed wlan0}${color}${font} ${goto 230}Total Up: ${font Ubuntu:style=Bold:size=9}${color2}${totalup wlan0}${color}${font}
${voffset 4}${goto 92}Signal:   ${font Ubuntu:style=Bold:size=9}${color1}${wireless_link_qual wlan0}%${color}${font} ${alignr 15}
${voffset 4}${goto 92}Down:   ${font Ubuntu:style=Bold:size=9}${color1}${downspeed wlan0}${color}${font} ${goto 230}Total Down: ${font Ubuntu:style=Bold:size=9}${color2}${totaldown wlan0}${color}${font}



# |--ETH0
${else}${if_up eth0}
${voffset -13}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 92}${voffset -6}Up: ${font Ubuntu:style=Bold:size=9}${color1}${upspeed eth0}${color}${font} ${alignr 15}${color2}${upspeedgraph eth0 8,60 92B6F1 CCDFFF}${color}
${goto 92}Insgesamt: ${color2}${totalup eth0}${color}
${voffset -2}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 92}${voffset -6}Down: ${font Ubuntu:style=Bold:size=9}${color1}${downspeed eth0}${color}${font} ${alignr 15}${color2}${downspeedgraph eth0 8,60 92B6F1 CCDFFF}${color}
${goto 92}Insgesamt: ${color2}${totaldown eth0}${color}
${voffset -2}${color0}${font Poky:size=13}w${font}${color}${goto 92}${voffset -4}Lokale IP: ${alignr 15}${color2}${addr eth0}${color}
${goto 92}Öffentliche IP: ${alignr 15}${color2}${execi 10800 ~/.conkycolors/bin/conkyIp}${color}
# |--PPP0
${endif}${else}${if_up ppp0}
${voffset -13}${color0}${font VariShapes Solid:size=14}q${font}${color}${goto 92}${voffset -6}Up: ${font Ubuntu:style=Bold:size=9}${color1}${upspeed ppp0}${color}${font} ${alignr 15}${color2}${upspeedgraph ppp0 8,60 92B6F1 CCDFFF}${color}
${goto 92}Insgesamt: ${color2}${totalup ppp0}${color}
${voffset -2}${color0}${font VariShapes Solid:size=14}Q${font}${color}${goto 92}${voffset -6}Down: ${font Ubuntu:style=Bold:size=9}${color1}${downspeed ppp0}${color}${font} ${alignr 15}${color2}${downspeedgraph ppp0 8,60 92B6F1 CCDFFF}${color}
${goto 92}Insgesamt: ${color2}${totaldown ppp0}${color}
${voffset -2}${color0}${font Poky:size=13}w${font}${color}${goto 92}${voffset -4}Lokale IP: ${alignr 15}${color2}${addr ppp0}${color}
${endif}${else}${voffset 4}${color0}${font PizzaDude Bullets:size=12}4${font}${color}${goto 92}Netzwerk nicht verfügbar${endif}${endif}

${image ~/.conky/base.png -p 10,0 -s 339x86}${image ~/.conky/base.png -p 10,146 -s 339x86}${image ~/.conky/base.png -p 10,73 -s 339x86}${image ~/.conky/Task_Manager.png -p 32,20 -s 45x45}${image ~/.conky/Memory.png -p 32,93 -s 45x45}${image ~/.conky/wlan100.png -p 32,166 -s 45x45}

And another I use. Put tar.gz extracted conky folder in /home/username. Folder is needed for image.png in conky display.

[rokytnji]

Stealing Absconding stuff. Turn off Tap to click

http://forum.vectorlinux.com/index.php?topic=17638.0;topicseen

Doing this because the Topic title does not cover this.

[rokytnji]

Flash and its problems

Depending on my gear. If I have a Pentium 3, 512MB ram computer.

Linux

    2.33GHz or faster x86-compatible processor, or Intel Atom 1.6GHz or faster processor for netbooks
    Red Hat® Enterprise Linux® (RHEL) 5.6 or later (32 bit and 64 bit), openSUSE® 11.3 or later (32 bit and 64 bit), or Ubuntu 10.04 or later (32 bit and 64 bit)
    Mozilla Firefox 17 or Google Chrome
    512MB of RAM; 128MB of graphics memory

One way I get around this is Install Grease Monkey first in my Browser.
https://addons.mozilla.org/en-US/firefox/addon/greasemonkey/

Then Install a couple of user scripts in Grease Monkey like
http://linterna-magica.nongnu.org/
http://userscripts.org/scripts/show/151139

Another way I skin a cat is to run Adobe flashplayer 10.3 instead of 11.2.

     

Linux

    DownloadDownload the Linux Flash Player 10.3 Plugin content debugger (TAR.GZ, 5.60MB)
    DownloadDownload the Linux Flash Player 10.3 Projector content debugger (TAR.GZ, 4.59MB)
    DownloadDownload the Linux Flash Player 10.3 Projector (TAR.GZ, 4.25MB)

http://www.adobe.com/support/flashplayer/downloads.html#fp10.3

MY IBM T23 Pentium 3, 1 Gig ram laptop streams you tube videos with no jerkiness or problems via a wirless pcmcia G card with Flash 10.3.

Just some other neato stuff for you tube

http://pkgs.org/slackware-13.1/slacky-x86_64/minitube-1.1-x86_64-1sl.txz.html
http://linux.softpedia.com/get/Multimedia/Video/Youtube-Viewer-60648.shtml
http://www.filewatcher.com/m/gtk-youtube-viewer.tbz.35-0.html

UMPlayer in vector linux has an awesome YouTube search & play feature that does not require a webbrowser..

[hata_ph]

Thanks for the info

[Pita]

And be careful with "dd" aka disk distroyer. Make double sure of your /dev/sd??
or you might end with: see aka.
dd carries no warning!