VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Pages: [1] 2

Author Topic: Help with K3b, please.  (Read 7842 times)

Locator

  • Vectorian
  • ****
  • Posts: 767
Help with K3b, please.
« on: December 14, 2012, 05:03:49 pm »

I am trying to use K3b to grab a video from a DVD, I ask it to show the files on the DVD, and I get the following error message:

I made sure that transcode was installed first.
« Last Edit: December 14, 2012, 05:07:36 pm by Locator »
Logged

MarkGrieveson

  • Vectorian
  • ****
  • Posts: 531
Re: Help with K3b, please.
« Reply #1 on: December 15, 2012, 07:12:29 am »

I get the same thing.  The "Start Ripping" link is greyed out, and when I press "Show files", I get a similar error to what you displayed in your screenshot.
Logged
I am using VL7.0 standard with XFCE

bigpaws

  • Vectorian
  • ****
  • Posts: 1869
Re: Help with K3b, please.
« Reply #2 on: December 15, 2012, 08:14:49 am »

My guess is that  K3B was not compiled with libdvdread

Bigpaws
Logged

Locator

  • Vectorian
  • ****
  • Posts: 767
Re: Help with K3b, please.
« Reply #3 on: December 15, 2012, 11:37:50 am »

How then do I resolve that problem?
Logged

bigpaws

  • Vectorian
  • ****
  • Posts: 1869
Re: Help with K3b, please.
« Reply #4 on: December 15, 2012, 12:07:44 pm »

recompile k3b with libdvdread, if the package was compiled without libdvdread support.

Bigpaws
Logged

Locator

  • Vectorian
  • ****
  • Posts: 767
Re: Help with K3b, please.
« Reply #5 on: December 17, 2012, 12:00:09 pm »

I had installed it using Gslapt, so how do I go about recompiling it?
Logged

MarkGrieveson

  • Vectorian
  • ****
  • Posts: 531
Re: Help with K3b, please.
« Reply #6 on: December 17, 2012, 02:47:23 pm »

I have libdvdread installed, version 4.1.3-i486-1, along with k3b version 2.0.2-i586-1vl70 installed.  I still get the issue that Locater described (that being that the "Start Ripping" link is greyed out).
Logged
I am using VL7.0 standard with XFCE

Locator

  • Vectorian
  • ****
  • Posts: 767
Re: Help with K3b, please.
« Reply #7 on: December 18, 2012, 12:18:27 pm »

I am trying to use K3b to grab a video from a DVD, I ask it to show the files on the DVD, and I get the following error message:

I made sure that transcode was installed first.

I forgot to mention before that the DVD that I was working with (in the above example) was one that I had made myself.
Logged

MarkGrieveson

  • Vectorian
  • ****
  • Posts: 531
Re: Help with K3b, please.
« Reply #8 on: December 18, 2012, 06:17:06 pm »

There seems to be some issue with transcode.  Even though it's installed, k3b cannot find it.  I uninstalled transcode via Gslapt, and tried to build it from source, but got the following feedback:  

Code: [Select]
../avilib/avilib.h:329:6: note: expected 'const char *' but argument is of type 'uint8_t *'
I'm not sure what to try to fix this.

PS, I have ffmpeg version 0.10-i586-5vl70 installed. 
« Last Edit: December 18, 2012, 06:34:33 pm by MarkGrieveson »
Logged
I am using VL7.0 standard with XFCE

stretchedthin

  • Administrator
  • Vectorian
  • *****
  • Posts: 3780
    • Opensourcebistro.com
Re: Help with K3b, please.
« Reply #9 on: December 18, 2012, 11:50:08 pm »

hi, I think transcode version 1.1.5 is at fault.  hata_ph and I are working on transcode 1.1.7 to see if this resolves the issue.  If so will get into gslapt as soon as possible.
Logged
Vectorlinux screencasts and  tutorials can be found at....
http://www.opensourcebistro.com/blog1
http://www.youtube.com/user/vid4ken?feature=mhee

stretchedthin

  • Administrator
  • Vectorian
  • *****
  • Posts: 3780
    • Opensourcebistro.com
Re: Help with K3b, please.
« Reply #10 on: December 19, 2012, 09:57:28 am »

Please try k3b for ripping after upgrading transcode to version 1.1.7.  I think that will resolve the problem.
Logged
Vectorlinux screencasts and  tutorials can be found at....
http://www.opensourcebistro.com/blog1
http://www.youtube.com/user/vid4ken?feature=mhee

MarkGrieveson

  • Vectorian
  • ****
  • Posts: 531
Re: Help with K3b, please.
« Reply #11 on: December 19, 2012, 10:55:19 am »

I installed transcode from testing.  k3b now sees transcode and uses it, but there was an error with ffmpeg:

Code: [Select]
[export_ffmpeg.so] Error opening configuration file ./ffmpeg.cfg: No such file or directory
The above feedback was from the "Show Debugging Output" after the rip of both titles on the dvd failed.  Also, the original feedback that Locater noted in his/her screenshot after pressing the "show files" link is still present.  I did a search on my system for ffmpeg.cfg, and it's not present:

Code: [Select]
vector://home/mark
root:# updatedb
vector://home/mark
root:# locate ffmpeg.cfg
vector://home/mark
root:#

vector://home/mark
root:# slapt-get --show ffmpeg k3b transcode
Package Name: ffmpeg
Package Mirror: http://vectorlinux.osuosl.org/veclinux-7.0/extra/
Package Priority: Default
Package Location: ./l
Package Version: 0.10-i586-5vl70
Package Size: 5448 K
Package Installed Size: 28020 K
Package Required:   SDL >= 1.2.14,alsa-lib >= 1.0.24.1,bzip2 >= 1.0.6,directfb >= 1.4.3,expat >= 2.0.1,fontconfig >= 2.8.0,freetype >= 2.4.4,glibc-solibs >= 2.13,libX11 >= 1.4.3,libXau >= 1.0.6,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 5.0,libXrandr >= 1.3.1,libXrender >= 0.9.6,libjpeg >= 8a,libogg >= 1.2.2,libtheora >= 1.1.1,libusb >= 1.0.8,libvorbis >= 1.3.2,libxcb >= 1.7,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,svgalib >= 1.9.25,xvidcore >= 1.2.2,zlib >= 1.2.5
Package Conflicts:  
Package Suggests:  
Package MD5 Sum:  181914c328ab362d9a783a3b60c5dde3
Package Description:
 ffmpeg (software to record, convert and stream audio and video)

 FFmpeg is a complete solution to record, convert and stream audio and
 video. It includes libavcodec, the leading audio/video codec library.





 ffmpeg home: http://ffmpeg.mplayerhq.hu/

Package Installed: yes
Package Name: k3b
Package Mirror: http://vectorlinux.osuosl.org/veclinux-7.0/extra/
Package Priority: Default
Package Location: ./xap
Package Version: 2.0.2-i586-1vl70
Package Size: 8474 K
Package Installed Size: 30280 K
Package Required:   QtZeitgeist >= 0.7.0,acl >= 2.2.50,attica >= 0.2.0,attr >= 2.4.45,bzip2 >= 1.0.6,cxxlibs >= 6.0.14 | gcc-g++ >= 4.5.2,dbus >= 1.4.6,expat >= 2.0.1,faac >= 1.28,ffmpeg >= 0.6,flac >= 1.2.1,fontconfig >= 2.8.0,freetype >= 2.4.4,gamin >= 0.1.10,gdbm >= 1.8.3,glib2 >= 2.28.6,glibc-solibs >= 2.13,gsm >= 1.0.13,icu4c >= 4.4.1,kdelibs >= 4.6.2,kdemultimedia >= 4.6.2,lame >= 3.98.4,libICE >= 1.0.7,libSM >= 1.2.0,libX11 >= 1.4.2,libXau >= 1.0.6,libXcursor >= 1.1.11,libXdmcp >= 1.1.0,libXext >= 1.2.0,libXfixes >= 4.0.5,libXft >= 2.2.0,libXi >= 1.4.1,libXpm >= 3.5.9,libXrender >= 0.9.6,libXtst >= 1.2.0,libcap >= 2.20,libdbusmenu-qt >= 0.8.1,libdiscid >= 0.2.2,libdvdread >= 4.1.3,libmad >= 0.15.1b,libmusicbrainz3 >= 3.0.3,libnut >= 20110109,libogg >= 1.2.2,libpng >= 1.4.5,libsamplerate >= 0.1.7,libsndfile >= 1.0.21,libtheora >= 1.1.1,libvorbis >= 1.3.2,libvpx >= 0.9.1,libxcb >= 1.7,libxml2 >= 2.7.8,musepack >= r435,neon >= 0.29.5,opencore-amr >= 0.1.2,openjpeg >= 1.3,openssl >= 0.9.8r | openssl-solibs >= 0.9.8r,oxygen-icons >= 4.6.2,orc >= 0.4.3,phonon >= 4.5.0,pulseaudio >= 0.9.22,qt >= 4.7.0_7abde40,rtmpdump >= 2.3,schroedinger >= 1.0.9,soprano >= 2.6.0,sqlite >= 3070500,strigi >= git20110405,taglib >= 1.6.3,udev >= 165,utempter >= 1.1.5,util-linux >= 2.19,x264 >= 20110116,xcb-util >= 0.3.6,xvidcore >= 1.2.2,xz >= 5.0.2,zlib >= 1.2.5
Package Conflicts:  
Package Suggests:  
Package MD5 Sum:  d91903b8e2e763e45eb45b48a2b990bc
Package Description:
 Feature-rich and easy to handle CD burning application
 





 License: GPL
 Authors:
 Website: http://k3b.sourceforge.net/
Package Installed: yes
Package Name: transcode
Package Mirror:
Package Priority: Default
Package Location:
Package Version: 1.1.7-i586-3vl70
Package Size: 984 K
Package Installed Size: 5900 K
Package Required:
Package Conflicts:
Package Suggests:
Package MD5 Sum:  
Package Description:
 transcode (Audio/Video transcoding)

 transcode is a text-console utility for video stream processing.
 Decoding and encoding is done by loading modules that are
 responsible for feeding transcode with raw video/audio streams
 (import modules) and encoding the frames (export modules). It
 supports elementary video and audio frame transformations,
 including de-interlacing or fast resizing of video frames and
 loading of external filters.

 License: GPL
 Authors: Refer to AUTHORS
 Website: http://www.transcoding.org/
Package Installed: yes
vector://home/mark
root:#

Also, here's the full "Show Debugging Output":

Code: [Select]
Devices
-----------------------
PIONEER DVD-ROM DVD-116 1.22 (/dev/sr1, CD-ROM, DVD-ROM) [DVD-ROM, CD-ROM] [None] [%7]
HL-DT-ST DVDRAM GSA-4163B A103 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite] [%7]

System
-----------------------
K3b Version: 2.0.2
KDE Version: 4.9.3
QT Version:  4.8.2
Kernel:      3.0.8

Used versions
-----------------------
transcode: 1.1.7

transcode
-----------------------
transcode v1.1.7 (C) 2001-2003 Thomas Oestreich, 2003-2010 Transcode Team
libdvdread: Using libdvdcss version 1.2.10 for DVD access
=== last message repeated 2 times. ===
[dvd_reader.c] DVD title 1/2: 20 chapter(s), 1 angle(s), title set 1
[dvd_reader.c] title playback time: 01:51:29.03  6690 sec
libdvdread: Using libdvdcss version 1.2.10 for DVD access
=== last message repeated 2 times. ===
[dvd_reader.c] DVD title 1/2: 20 chapter(s), 1 angle(s), title set 1
[dvd_reader.c] title playback time: 01:51:29.03  6690 sec
[transcode] V: auto-probing     | /dev/sr0 (OK)
[transcode] V: import format    | MPEG 2 program stream in DVD NTSC (module=dvd)
[transcode] A: auto-probing     | /dev/sr0 (OK)
[transcode] A: import format    | AC3 in DVD NTSC (module=dvd)
[transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce frame rate
[transcode] V: import frame     | 720x480  1.50:1  encoded @ 4:3
[transcode] V: clip frame (<-)  | 720x480
[transcode] V: zoom             | 624x480  1.30:1 (Lanczos3)
[transcode] V: bits/pixel       | 0.167
[transcode] V: decoding fps,frc | 23.976,1
[transcode] V: multi-pass       | (mode=1) writing data (pass 1) to /home/mark/tmp/k3b_0.log
[transcode] V: video format     | YUV420 (4:2:0) aka I420
[transcode] A: import format    | 0x2000  AC3          [48000,16,2]
[transcode] A: export           | disabled
[transcode] V: encoding fps,frc | 23.976,1
[transcode] A: language         | xx
[transcode] A: bytes per frame  | 8008 (8008.000000)
[transcode] A: adjustment       | 0@1000
[transcode] V: IA32/AMD64 accel | sse2 sse mmx cmove asm
[transcode] V: video buffer     | 10 @ 720x480 [0x2]
[transcode] A: audio buffer     | 10 @ 48000x2x16
[import_dvd.so] v0.4.1 (2007-07-15) (video) DVD | (audio) MPEG/AC3/PCM
[export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
[export_ffmpeg.so] v0.3.18 (2008-11-29) (video) Lavc53.60.100 | (audio) MPEG/AC3/PCM
libdvdread: Using libdvdcss version 1.2.10 for DVD access
[import_dvd.so] tccat -T 1,-1,1 -i "/dev/sr0" -t dvd -d 0 | tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -x ac3 -a 0 -d 0 | tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
[import_dvd.so] tccat -T 1,-1,1 -i "/dev/sr0" -t dvd -d 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/fileegzguR -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yuv420p
[import_dvd.so] delaying DVD access by 3 seconds
[import_dvd.so] waiting...
libdvdread: Using libdvdcss version 1.2.10 for DVD access
Using djbfft for IMDCT transform
libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient
libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x00000152
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x001c6cff
libdvdread: Elapsed time 0
libdvdread: Found 2 VTS's
libdvdread: Elapsed time 0
[import_dvd.so] waiting...
=== last message repeated 2 times. ===
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient
libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x00000152
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x001c6cff
libdvdread: Elapsed time 0
libdvdread: Found 2 VTS's
libdvdread: Elapsed time 0
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
[export_ffmpeg.so] Using FFMPEG codec 'mpeg4' (FourCC 'DIVX', MPEG4 compliant video).
[export_ffmpeg.so] No profile selected
[export_ffmpeg.so] Error opening configuration file ./ffmpeg.cfg: No such file or directory
[export_ffmpeg.so] Starting 1 thread(s)
[export_ffmpeg.so] Set display aspect ratio to input
[export_ffmpeg.so] Parsing ffmpeg preset 'medium'
File for preset 'medium' not found
transcode v1.1.7 (C) 2001-2003 Thomas Oestreich, 2003-2010 Transcode Team
libdvdread: Using libdvdcss version 1.2.10 for DVD access
=== last message repeated 2 times. ===
[dvd_reader.c] DVD title 2/2: 5 chapter(s), 1 angle(s), title set 2
[dvd_reader.c] title playback time: 00:27:11.28  1632 sec
libdvdread: Using libdvdcss version 1.2.10 for DVD access
=== last message repeated 2 times. ===
[dvd_reader.c] DVD title 2/2: 5 chapter(s), 1 angle(s), title set 2
[dvd_reader.c] title playback time: 00:27:11.28  1632 sec
[transcode] V: auto-probing     | /dev/sr0 (OK)
[transcode] V: import format    | MPEG 2 program stream in DVD NTSC (module=dvd)
[transcode] A: auto-probing     | /dev/sr0 (OK)
[transcode] A: import format    | AC3 in DVD NTSC (module=dvd)
[transcode] V: AV demux/sync    | (2) initial MPEG sequence / enforce frame rate
[transcode] V: import frame     | 720x480  1.50:1  encoded @ 4:3
[transcode] V: clip frame (<-)  | 720x480
[transcode] V: zoom             | 624x480  1.30:1 (Lanczos3)
[transcode] V: bits/pixel       | 0.167
[transcode] V: decoding fps,frc | 23.976,1
[transcode] V: multi-pass       | (mode=1) writing data (pass 1) to /home/mark/tmp/k3b_0.log
[transcode] V: video format     | YUV420 (4:2:0) aka I420
[transcode] A: import format    | 0x2000  AC3          [48000,16,2]
[transcode] A: export           | disabled
[transcode] V: encoding fps,frc | 23.976,1
[transcode] A: language         | xx
[transcode] A: bytes per frame  | 8008 (8008.000000)
[transcode] A: adjustment       | 0@1000
[transcode] V: IA32/AMD64 accel | sse2 sse mmx cmove asm
[transcode] V: video buffer     | 10 @ 720x480 [0x2]
[transcode] A: audio buffer     | 10 @ 48000x2x16
[import_dvd.so] v0.4.1 (2007-07-15) (video) DVD | (audio) MPEG/AC3/PCM
[export_null.so] v0.1.2 (2001-08-17) (video) null | (audio) null
[export_ffmpeg.so] v0.3.18 (2008-11-29) (video) Lavc53.60.100 | (audio) MPEG/AC3/PCM
libdvdread: Using libdvdcss version 1.2.10 for DVD access
[import_dvd.so] tccat -T 2,-1,1 -i "/dev/sr0" -t dvd -d 0 | tcdemux -a 0 -x ac3 -S 0 -M 2 -d 0 | tcextract -t vob -x ac3 -a 0 -d 0 | tcdecode -x ac3 -d 0 -s 1.000000,1.000000,1.000000 -A 0
[import_dvd.so] tccat -T 2,-1,1 -i "/dev/sr0" -t dvd -d 0 | tcdemux -s 0x80 -x mpeg2 -S 0 -M 2 -f 23.976024 -P /tmp/fileNavC1B -d 0 | tcextract -t vob -a 0 -x mpeg2 -d 0 | tcdecode -x mpeg2 -d 0 -y yuv420p
[import_dvd.so] delaying DVD access by 3 seconds
[import_dvd.so] waiting...
libdvdread: Using libdvdcss version 1.2.10 for DVD access
Using djbfft for IMDCT transform
libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient
libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x00000152
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x001c6cff
libdvdread: Elapsed time 0
libdvdread: Found 2 VTS's
libdvdread: Elapsed time 0
[import_dvd.so] waiting...
=== last message repeated 2 times. ===
libdvdread: Using libdvdcss version 1.2.10 for DVD access
libdvdread: Attempting to retrieve all CSS keys
libdvdread: This can take a _long_ time, please be patient
libdvdread: Get key for /VIDEO_TS/VTS_01_1.VOB at 0x00000152
libdvdread: Elapsed time 0
libdvdread: Get key for /VIDEO_TS/VTS_02_1.VOB at 0x001c6cff
libdvdread: Elapsed time 0
libdvdread: Found 2 VTS's
libdvdread: Elapsed time 0
[decode_mpeg2.c] libmpeg2 acceleration: mmxext
[export_ffmpeg.so] Using FFMPEG codec 'mpeg4' (FourCC 'DIVX', MPEG4 compliant video).
[export_ffmpeg.so] No profile selected
[export_ffmpeg.so] Error opening configuration file ./ffmpeg.cfg: No such file or directory
[export_ffmpeg.so] Starting 1 thread(s)
[export_ffmpeg.so] Set display aspect ratio to input
[export_ffmpeg.so] Parsing ffmpeg preset 'medium'
File for preset 'medium' not found

transcode command:
-----------------------
/usr/bin/transcode --nice 19 --log_no_color --progress_meter 2 --progress_rate 1336 -i /dev/sr0 -x dvd -T 1,-1,1 -a 0 -j 0,0,0,0 -R 1,/home/mark/tmp/k3b_0.log -y ffmpeg,null -o /dev/null -F mpeg4 -w 1200 -Z 624x480
/usr/bin/transcode --nice 19 --log_no_color --progress_meter 2 --progress_rate 326 -i /dev/sr0 -x dvd -T 2,-1,1 -a 0 -j 0,0,0,0 -R 1,/home/mark/tmp/k3b_0.log -y ffmpeg,null -o /dev/null -F mpeg4 -w 1200 -Z 624x480
« Last Edit: December 19, 2012, 11:17:49 am by MarkGrieveson »
Logged
I am using VL7.0 standard with XFCE

Locator

  • Vectorian
  • ****
  • Posts: 767
Re: Help with K3b, please.
« Reply #12 on: December 19, 2012, 11:05:04 am »

Please try k3b for ripping after upgrading transcode to version 1.1.7.  I think that will resolve the problem.


The current version of transcode that GSlapt lists is 1.1.5 (and yes, I did update GSlapt).
Logged

stretchedthin

  • Administrator
  • Vectorian
  • *****
  • Posts: 3780
    • Opensourcebistro.com
Re: Help with K3b, please.
« Reply #13 on: December 19, 2012, 12:09:46 pm »

You will need to have testing enabled in gslapt for this one.

If unsure watch this vid...
http://www.youtube.com/watch?v=HS-_hxy4iyw
Logged
Vectorlinux screencasts and  tutorials can be found at....
http://www.opensourcebistro.com/blog1
http://www.youtube.com/user/vid4ken?feature=mhee

Locator

  • Vectorian
  • ****
  • Posts: 767
Re: Help with K3b, please.
« Reply #14 on: December 19, 2012, 01:01:57 pm »

I just now tried ripping a DVD with K3b using the newest version of transcode, and got the following display -
Logged
Pages: [1] 2