Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[rbistolfi]

please give back controll of hard disk partition  back to users, currently with 037.iso,no choice....
made user in passive blues mode..
please change and fix and offer users the real controll for installations and hard disk

Whats exactly what you cant achieve ?

[rbistolfi]

just downloaded VL64-7.1-STD-B0.37.iso,

using unetbootin to install to a new desktop,
but can't set  / partition as xfs,  if chose xfs, press forward, it hang there .
always have to chose auto install... then that's ext3..... also it will take whole disk to make partition auto.

which's aggressive....

there's advance choice, but it won;t function at all......

by which command i can set / as xfs for install ,,
please help!

please offer the fix asap

If advanced wont work thats a bug to be fixed, we will fix xfs once we discover the source of the problem.
Keep in mind this is beta software... there are errors to fix.

[roarde]

Hexchat v Pidgin:

I'm a devoted Xchat/Hexchat user. Wouldn't touch Pidgin with your keyboard and a very long stick.

Yet my opinion is that on the ISO, Pidgin should stay, Hexchat must go.

1. Pidgin covers more protocols.
2. It's more like what brand-new users have seen before.
3. Hexchat users know how to add and remove software, and usually how to add BitlBee or such if wanted.

Of course, if the size difference between the two decides in favor of Hexchat on ISO, no complaints here 

[vector]

If advanced wont work thats a bug to be fixed, we will fix xfs once we discover the source of the problem.
Keep in mind this is beta software... there are errors to fix.

This is a new bug over the last two test releases as this hasn't happened since the installer was brand new. Hopefully we can get this fixed soon so we can get an official beta release out soon.................

Cheers,
Vec

[rbistolfi]

If advanced wont work thats a bug to be fixed, we will fix xfs once we discover the source of the problem.
Keep in mind this is beta software... there are errors to fix.

This is a new bug over the last two test releases as this hasn't happened since the installer was brand new. Hopefully we can get this fixed soon so we can get an official beta release out soon.................

Cheers,
Vec

Hmm xfs is disabled for root from the very beginning because it was causing problems with bootloaders. The error is that it shouldnt be offered as an option for /, at least until a fix for the other problems is found.

[vector]

was not talking about xfs  just  the lack of the advanced option which has been available for sometime. This only occured with last test release.

cheers,
Vec

[vincent2]

at first i used unetbootin to make boot image on pendrive to boot... then boot then gparted.......

you see 60 G hd used for install, before install only one partition ntfs onit
i deleted  with gparted, then made one promary partitionat 20G for /, 8G for  swap, then extended partiton 27G for /home,  except swap ,a ll were  formated to xfs

was my partition made wrong  then system refuse  to install?

never had such daunting install experirneces with vl7.1 64 bit...

it hangs at  there for advance installl...

only possible to install with auto install. that's in ext3.. a bit slow.

tested pulling out hd  to another pc installing , same issue, no advance install possible.

[vincent2]

please do advise the proper correct method for making 3 partitions(/, swap, home)on blank hd  with gparted or other tools.
maybe VL 7.1 developper should also give partition model plans for user to chose when installing, like mandriva  always advise which partition setting  are suitable.

[rbistolfi]

was not talking about xfs  just  the lack of the advanced option which has been available for sometime. This only occured with last test release.

cheers,
Vec

Sorry Vec I missed the context of your answer.

i deleted  with gparted, then made one promary partitionat 20G for /, 8G for  swap, then extended partiton 27G for /home,  except swap ,a ll were  formated to xfs
was my partition made wrong  then system refuse  to install?

The partition scheme looks right to me.

never had such daunting install experirneces with vl7.1 64 bit...
it hangs at  there for advance installl...

Sometimes trying to improve or fix things breaks something else, it happens when software is being developed.

tested pulling out hd  to another pc installing , same issue, no advance install possible.

There is a bug in advanced install and we are working to fix it. As I said before, this is beta software and some problems are expected.
You may want to wait for a stable release.

Thanks for the feedback, we will be happy to fix things and try to improve the Vector experience.

[Pita]

B0-37 32bit

Burned DVD. Tried to install from with GUI. It does not go Forward when a partition is
assigened as root no matter if set to format or not.to format

Tried TUI installer. Same after assigning a partition as root and clicking on Next
it jumps out to console as root.

Tried good old Setup and it will not find the CD.

Might try vinstall-iso-ng tomorrow.

[hata_ph]

On B0.38..

Running text installation on 32 and 64bit give me below error

No filesystem could mount root, tried: reisefs ext3 ext2 ext4 vfat msdos iso9660 ntfs romfs udf jfs xfs ocfs2 brtfs gfs2 gfs2meta
Kernel panic - not syncing: VFS: Unable to mount root fs on unknow-block(1,0)

Automatic GUI installation work. But I notice it will not use the full disk size when auto partitioning. For example, I have a 10GB vbox disk, it will create 8GB as / and 1GB as swap...and there will be around 400MB plus of unpartition free space left

Advance GUI installation work on both version but if you choose lilo as the boot loader it will hang at the installing bootloader stage...choose Grub2 and it work finish the process.

On 32bit, system will hang at bootsplash after the installation. Press esp key will let u go to TUI login, type startx will show xinit: connection to x server lost, type startxfce4 give me a vanila xfce4 desktop

On 64bit, every work fine...just notice there is a Desktop folder on the xfce4 desktop....

btw, why the default hostname is darkstar.example.com?

[vincent2]

install VL64-7.1-STD-B0.38  now with samsung lcd monitor,
now chose advanced , it will go forward.....now still installing.....
another bug for samsung lcd,
installer can't distinguish samsung syncmaster  920nw lcd well,which should be working at 1440x900 resolution  in standard...when installing with sync master series of lcd, installer keeps flashing,thenshut off,have to press  switch on  every 2 minutes....
anyone use samsung syncmaster lcd  for installig??

920 nw specification is in attachment hereby

[vincent2]

now installed b38     64 bit.....
dissappoitedly, no X , no sound at all....

typying  as root
xvconf
 prompt, it prompt:

no X found so bailing.......................

typyting alsaconf

no supported pnp pci card found...


no vasm available.

how should i  auto detect hardware?

anyway
vl64  7.1 038 can't  load graphic driver for  intel G41  north chipsets,still samsung syncmaster 920nw or other model can't be able to work at standard 1440x900.... which s old bugs for xorg, addressed many times since 2010 but still didn't put fix in xorg yet...mandriva does have good support to syncmaster lcd./

[vincent2]

now reinstalled  038again, have to chose all to install, tick all 3 box, then should work

installer can't distinguish samsung syncmaster  920nw lcd well,which should be working at 1440x900 resolution  in standard...   it's really daunting eye sore: lcd menu prompted out box:Not optimum mode recommended mode:1440x900 60hz

[vincent2]

now 038  64bit does work ......but intel g41 vga  chip can't be loaded correctly, it now  is working as vesa  mode, other mode doesn't work at all.
please  fix up the driver issue with g41 chips  asap.
due to vga driver as vesa, boot into gui takes very long.....

here's dmesg output

.....
imers in total, 0 timers will be used for per-cpu timer
[    0.155525] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.155677] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[    0.158007] Switching to clocksource hpet
[    0.163670] pnp: PnP ACPI init
[    0.163767] ACPI: bus type PNP registered
[    0.163999] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.164096] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.164183] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.164267] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.164353] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.164440] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.164449] pnp 00:01: [dma 4]
[    0.164488] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    0.164572] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
[    0.164624] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.164664] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[    0.164706] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    0.164919] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.165102] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.165198] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.165258] system 00:09: [io  0x0400-0x047f] has been reserved
[    0.165345] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165508] system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved
[    0.165596] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.165742] system 00:0b: [mem 0x000cc800-0x000cffff] has been reserved
[    0.165830] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be reserved
[    0.165917] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.166013] system 00:0b: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.166101] system 00:0b: [mem 0x77ce0000-0x77ceffff] could not be reserved
[    0.166188] system 00:0b: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.166275] system 00:0b: [mem 0x00100000-0x77cdffff] could not be reserved
[    0.166363] system 00:0b: [mem 0x77cf0000-0x77cfffff] has been reserved
[    0.166449] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.166537] system 00:0b: [mem 0xfed13000-0xfed1dfff] has been reserved
[    0.166622] system 00:0b: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.166709] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.166794] system 00:0b: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.166880] system 00:0b: [mem 0xfff00000-0xffffffff] has been reserved
[    0.166966] system 00:0b: [mem 0x000e0000-0x000effff] has been reserved
[    0.167065] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.167115] pnp 00:0c: Plug and Play ACPI device, IDs INT0800 (active)
[    0.167119] pnp: PnP ACPI: found 13 devices
[    0.167200] ACPI: bus type PNP unregistered
[    0.174849] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.174853] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[    0.174855] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[    0.174862] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[    0.174872] pci 0000:00:1c.0: res[8]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[    0.174874] pci 0000:00:1c.0: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.174876] pci 0000:00:1c.1: res[9]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[    0.174877] pci 0000:00:1c.0: res[7]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[    0.174882] pci 0000:00:1c.0: BAR 8: assigned [mem 0x77d00000-0x77efffff]
[    0.174971] pci 0000:00:1c.0: BAR 9: assigned [mem 0x77f00000-0x780fffff 64bit pref]
[    0.175151] pci 0000:00:1c.1: BAR 9: assigned [mem 0x78100000-0x782fffff 64bit pref]
[    0.175297] pci 0000:00:1c.0: BAR 7: assigned [io  0x1000-0x1fff]
[    0.175382] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.175465] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.175552] pci 0000:00:1c.0:   bridge window [mem 0x77d00000-0x77efffff]
[    0.175639] pci 0000:00:1c.0:   bridge window [mem 0x77f00000-0x780fffff 64bit pref]
[    0.175785] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.175868] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.175954] pci 0000:00:1c.1:   bridge window [mem 0xfde00000-0xfdefffff]
[    0.176050] pci 0000:00:1c.1:   bridge window [mem 0x78100000-0x782fffff 64bit pref]
[    0.176196] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.176286] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.176460] pci 0000:00:1e.0: setting latency timer to 64
[    0.176464] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.176465] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.176467] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.176468] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
[    0.176470] pci_bus 0000:00: resource 8 [mem 0x77d00000-0xfebfffff]
[    0.176472] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.176473] pci_bus 0000:01: resource 1 [mem 0x77d00000-0x77efffff]
[    0.176475] pci_bus 0000:01: resource 2 [mem 0x77f00000-0x780fffff 64bit pref]
[    0.176477] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.176478] pci_bus 0000:02: resource 1 [mem 0xfde00000-0xfdefffff]
[    0.176480] pci_bus 0000:02: resource 2 [mem 0x78100000-0x782fffff 64bit pref]
[    0.176482] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
[    0.176484] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
[    0.176485] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[    0.176487] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
[    0.176488] pci_bus 0000:03: resource 8 [mem 0x77d00000-0xfebfffff]
[    0.176514] NET: Registered protocol family 2
[    0.176723] TCP established hash table entries: 16384 (order: 6, 262144 bytes)
[    0.176971] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.177164] TCP: Hash tables configured (established 16384 bind 16384)
[    0.177296] TCP: reno registered
[    0.177377] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.177471] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.177606] NET: Registered protocol family 1
[    0.177758] RPC: Registered named UNIX socket transport module.
[    0.177844] RPC: Registered udp transport module.
[    0.177927] RPC: Registered tcp transport module.
[    0.178019] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.178111] pci 0000:00:02.0: Boot video device
[    0.189115] PCI: CLS 4 bytes, default 64
[    0.189542] audit: initializing netlink socket (disabled)
[    0.189634] type=2000 audit(1372783504.188:1): initialized
[    0.192347] VFS: Disk quotas dquot_6.5.2
[    0.192480] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.192860] DLM installed
[    0.193732] NFS: Registering the id_resolver key type
[    0.193823] Key type id_resolver registered
[    0.193904] Key type id_legacy registered
[    0.193987] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.194232] NTFS driver 2.1.30 [Flags: R/W].
[    0.194390] ROMFS MTD (C) 2007 Red Hat, Inc.
[    0.194611] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.197555] SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
[    0.198168] OCFS2 1.5.0
[    0.198354] ocfs2: Registered cluster interface o2cb
[    0.198496] ocfs2: Registered cluster interface user
[    0.198579] OCFS2 DLMFS 1.5.0
[    0.198717] OCFS2 User DLM kernel interface loaded
[    0.198800] OCFS2 Node Manager 1.5.0
[    0.198989] OCFS2 DLM 1.5.0
[    0.199526] Btrfs loaded
[    0.199956] GFS2 installed
[    0.200054] msgmni has been set to 3730
[    0.200928] async_tx: api initialized (async)
[    0.201056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.201217] io scheduler noop registered
[    0.201298] io scheduler deadline registered (default)
[    0.201643] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    0.201725] crc32: self tests passed, processed 225944 bytes in 125574 nsec
[    0.201941] crc32c: CRC_LE_BITS = 64
[    0.202039] crc32c: self tests passed, processed 225944 bytes in 63276 nsec
[    0.202158] xz_dec_test: module loaded
[    0.202238] xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it.
[    0.202492] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.202582] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.202746] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.202942] intel_idle: does not run on family 6 model 23
[    0.202992] GHES: HEST is not enabled!
[    0.205472] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.226094] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.228491] brd: module loaded
[    0.229415] loop: module loaded
[    0.229495] Compaq SMART2 Driver (v 2.6.0)
[    0.229636] HP CISS Driver (v 3.6.26)
[    0.230171] Loading iSCSI transport class v2.0-870.
[    0.230627] fnic: Cisco FCoE HBA Driver, ver 1.5.0.2
[    0.230741] fnic: Successfully Initialized Trace Buffer
[    0.231083] Adaptec aacraid driver 1.2-0[30000]-ms
[    0.231228] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    0.231485] scsi: <fdomain> Detection failed (no card)
[    0.231604] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.04.00.13-k.
[    0.231813] iscsi: registered transport (qla4xxx)
[    0.231929] QLogic iSCSI HBA Driver
[    0.232044] Emulex LightPulse Fibre Channel SCSI driver 8.3.37
[    0.232128] Copyright(c) 2004-2009 Emulex.  All rights reserved.
[    0.232321] Brocade BFA FC/FCOE SCSI driver - version: 3.1.2.1
[    0.232543] DC390: clustering now enabled by default. If you get problems load
[    0.232686]        with "disable_clustering=1" and report to maintainers
[    0.232831] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[    0.233032] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[    0.233147] megasas: 06.506.00.00-rc1 Sat. Feb. 9 17:00:00 PDT 2013
[    0.234959] mpt2sas version 14.100.00.00 loaded
[    0.235141] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    0.235300] 3ware Storage Controller device driver for Linux v1.26.02.003.
[    0.235413] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[    0.235581] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    0.235748] ipr: IBM Power RAID SCSI Device Driver version: 2.6.0 (November 16, 2012)
[    0.235916] RocketRAID 3xxx/4xxx Controller driver v1.8
[    0.236045] stex: Promise SuperTrak EX Driver version: 4.6.0000.4
[    0.236244] st: Version 20101219, fixed bufsize 32768, s/g segs 256
[    0.236664] ata_piix 0000:00:1f.1: version 2.13
[    0.236755] ata_piix 0000:00:1f.1: setting latency timer to 64
[    0.237119] scsi0 : ata_piix
[    0.237437] scsi1 : ata_piix
[    0.237670] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf800 irq 14
[    0.237757] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf808 irq 15
[    0.237883] ata_piix 0000:00:1f.2: MAP [
[    0.237978]  P0 P2 P1 P3 ]
[    0.238154] ata_piix 0000:00:1f.2: setting latency timer to 64
[    0.238582] scsi2 : ata_piix
[    0.238835] scsi3 : ata_piix
[    0.239107] ata3: SATA max UDMA/133 cmd 0xf700 ctl 0xf600 bmdma 0xf300 irq 19
[    0.239195] ata4: SATA max UDMA/133 cmd 0xf500 ctl 0xf400 bmdma 0xf308 irq 19
[    0.240999] I2O subsystem v1.325
[    0.241109] i2o: max drivers = 8
[    0.241283] I2O Configuration OSM v1.323
[    0.241387] I2O Bus Adapter OSM v1.317
[    0.241490] I2O Block Device OSM v1.325
[    0.241619] I2O SCSI Peripheral OSM v1.316
[    0.241721] I2O ProcFS OSM v1.316
[    0.241828] Fusion MPT base driver 3.04.20
[    0.241907] Copyright (c) 1999-2008 LSI Corporation
[    0.241991] Fusion MPT SPI Host driver 3.04.20
[    0.242111] Fusion MPT FC Host driver 3.04.20
[    0.242222] Fusion MPT SAS Host driver 3.04.20
[    0.242331] Fusion MPT misc device (ioctl) driver 3.04.20
[    0.242461] mptctl: Registered with Fusion MPT base driver
[    0.242543] mptctl: /dev/mptctl @ (major,minor=10,220)
[    0.242624] Fusion MPT LAN driver 3.04.20
[    0.242782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.242867] ehci-pci: EHCI PCI platform driver
[    0.243036] ehci-pci 0000:00:1d.7: setting latency timer to 64
[    0.243039] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    0.243197] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    0.247235] ehci-pci 0000:00:1d.7: cache line size of 4 is not supported
[    0.247249] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdfff000
[    0.253015] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.253136] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.253231] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.253374] usb usb1: Product: EHCI Host Controller
[    0.253457] usb usb1: Manufacturer: Linux 3.9.8 ehci_hcd
[    0.253540] usb usb1: SerialNumber: 0000:00:1d.7
[    0.253727] hub 1-0:1.0: USB hub found
[    0.253810] hub 1-0:1.0: 8 ports detected
[    0.254017] ehci-platform: EHCI generic platform driver
[    0.254190] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.254323] uhci_hcd: USB Universal Host Controller Interface driver
[    0.254453] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.254456] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.254585] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.254747] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fe00
[    0.254856] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    0.254942] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.255095] usb usb2: Product: UHCI Host Controller
[    0.255177] usb usb2: Manufacturer: Linux 3.9.8 uhci_hcd
[    0.255259] usb usb2: SerialNumber: 0000:00:1d.0
[    0.255437] hub 2-0:1.0: USB hub found
[    0.255518] hub 2-0:1.0: 2 ports detected
[    0.255674] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.255677] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.255803] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[    0.255963] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fd00
[    0.256077] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    0.256162] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.256302] usb usb3: Product: UHCI Host Controller
[    0.256383] usb usb3: Manufacturer: Linux 3.9.8 uhci_hcd
[    0.256465] usb usb3: SerialNumber: 0000:00:1d.1
[    0.256645] hub 3-0:1.0: USB hub found
[    0.256726] hub 3-0:1.0: 2 ports detected
[    0.256881] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.256884] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.257016] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[    0.257183] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fc00
[    0.257287] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    0.257373] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.257513] usb usb4: Product: UHCI Host Controller
[    0.257594] usb usb4: Manufacturer: Linux 3.9.8 uhci_hcd
[    0.257676] usb usb4: SerialNumber: 0000:00:1d.2
[    0.257851] hub 4-0:1.0: USB hub found
[    0.257932] hub 4-0:1.0: 2 ports detected
[    0.258097] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.258099] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.258231] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[    0.258398] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000fb00
[    0.258503] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    0.258588] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.258729] usb usb5: Product: UHCI Host Controller
[    0.258810] usb usb5: Manufacturer: Linux 3.9.8 uhci_hcd
[    0.258892] usb usb5: SerialNumber: 0000:00:1d.3
[    0.259091] hub 5-0:1.0: USB hub found
[    0.259172] hub 5-0:1.0: 2 ports detected
[    0.259576] Initializing USB Mass Storage driver...
[    0.259697] usbcore: registered new interface driver usb-storage
[    0.259780] USB Mass Storage support registered.
[    0.259885] usbcore: registered new interface driver ums-alauda
[    0.259993] usbcore: registered new interface driver ums-cypress
[    0.260111] usbcore: registered new interface driver ums-datafab
[    0.260220] usbcore: registered new interface driver ums-freecom
[    0.260330] usbcore: registered new interface driver ums-isd200
[    0.260440] usbcore: registered new interface driver ums-jumpshot
[    0.260549] usbcore: registered new interface driver ums-karma
[    0.260657] usbcore: registered new interface driver ums-onetouch
[    0.260766] usbcore: registered new interface driver ums-sddr09
[    0.260874] usbcore: registered new interface driver ums-sddr55
[    0.260982] usbcore: registered new interface driver ums-usbat
[    0.261150] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.261235] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.261526] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.261717] mousedev: PS/2 mouse device common for all mice
[    0.261944] rtc_cmos 00:03: RTC can wake from S4
[    0.262090] rtc (null): alarm rollover: day
[    0.262151] rtc rtc0: rtc_cmos: dev (254:0)
[    0.262158] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    0.262264] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.262720] md: linear personality registered for level -1
[    0.262804] md: raid0 personality registered for level 0
[    0.262887] md: raid1 personality registered for level 1
[    0.262970] md: raid10 personality registered for level 10
[    0.263067] md: raid6 personality registered for level 6
[    0.263150] md: raid5 personality registered for level 5
[    0.263233] md: raid4 personality registered for level 4
[    0.263316] md: multipath personality registered for level -4
[    0.263481] device-mapper: uevent: version 1.0.3
[    0.263648] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    0.263883] cpuidle: using governor ladder
[    0.263964] cpuidle: using governor menu
[    0.264058] ledtrig-cpu: registered to indicate activity on CPUs
[    0.264191] hidraw: raw HID events driver (C) Jiri Kosina
[    0.264606] usbcore: registered new interface driver usbhid
[    0.264693] usbhid: USB HID core driver
[    0.264884] ashmem: initialized
[    0.265060] TCP: cubic registered
[    0.265139] Initializing XFRM netlink socket
[    0.265222] NET: Registered protocol family 17
[    0.266062] sctp: Hash tables configured (established 65536 bind 65536)
[    0.281141] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.423513] ata1.00: ATA-6: ST360020A, 3.39, max UDMA/100
[    0.423608] ata1.00: 117231408 sectors, multi 16: LBA
[    0.423707] ata1.01: ATAPI: HL-DT-ST CD-ROM GCR-8482B, 1.07, max UDMA/33
[    0.445399] ata1.00: configured for UDMA/100
[    0.467203] ata1.01: configured for UDMA/33
[    0.814024] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[    0.967301] usb 4-1: New USB device found, idVendor=05e3, idProduct=1205
[    0.967399] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    0.967495] usb 4-1: Product: USB Mouse
[    0.983585] input: USB Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input1
[    0.983816] hid-generic 0003:05E3:1205.0001: input,hidraw0: USB HID v1.00 Mouse [USB Mouse] on usb-0000:00:1d.2-1/input0
[    1.192042] tsc: Refined TSC clocksource calibration: 3747.236 MHz
[    1.192140] Switching to clocksource tsc
[    3.248091] floppy0: no floppy controllers found
[    3.248363] scsi 0:0:0:0: Direct-Access     ATA      ST360020A        3.39 PQ: 0 ANSI: 5
[    3.248637] sd 0:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
[    3.248817] sd 0:0:0:0: [sda] Write Protect is off
[    3.248900] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.248924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.249749] scsi 0:0:1:0: CD-ROM            HL-DT-ST CD-ROM GCR-8482B 1.07 PQ: 0 ANSI: 5
[    3.285708]  sda: sda1 sda2 < sda5 sda6 >
[    3.286975] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[    3.287089] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.287158] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.289006] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    3.289146] registered taskstats version 1
[    3.289413] rtc_cmos 00:03: setting system clock to 2013-07-02 16:45:07 UTC (1372783507)
[    3.291188] CPU 0 is now offline
[    3.291375] md: Waiting for all devices to be available before autodetect
[    3.291462] md: If you don't use raid, use raid=noautodetect
[    3.291688] md: Autodetecting RAID arrays.
[    3.291770] md: Scanned 0 and added 0 devices.
[    3.291851] md: autorun ...
[    3.291929] md: ... autorun DONE.
[    3.336825] UDF-fs: warning (device sda1): udf_fill_super: No partition found (1)
[    3.337723] XFS (sda1): Mounting Filesystem
[    3.734303] XFS (sda1): Ending clean mount
[    3.734409] VFS: Mounted root (xfs filesystem) readonly on device 8:1.
[    3.748404] devtmpfs: mounted
[    3.749556] Freeing unused kernel memory: 1468k freed
[    3.749947] Write protecting the kernel read-only data: 14336k
[    3.750171] Freeing unused kernel memory: 16k freed
[    3.751217] Freeing unused kernel memory: 612k freed
[    5.203196] udevd[1446]: starting version 182
[    6.697592] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[    6.697598] ACPI: Power Button [PWRB]
[    6.697904] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    6.697907] ACPI: Power Button [PWRF]
[    6.990504] microcode: CPU1 sig=0x1067a, pf=0x1, revision=0xa0b
[    7.317286] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    7.460810] parport_pc 00:07: reported by Plug and Play ACPI
[    7.460852] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    7.464069] intel_rng: FWH not detected
[    7.569400] Linux agpgart interface v0.103
[    7.654814] ppdev: user-space parallel port driver
[    7.782238] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    7.810211] atl1c 0000:02:00.0: version 1.0.1.1-NAPI
[    7.855914] ACPI: Requesting acpi_cpufreq
[    8.102767] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \GP2C 1 (20130117/utaddress-251)
[    8.102773] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    8.102789] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.237606] agpgart-intel 0000:00:00.0: Intel G41 Chipset
[    8.237642] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    8.237862] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[    8.238163] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    8.409677] [drm] Initialized drm 1.1.0 20060810
[    8.628992] leds_ss4200: no LED devices found
[    8.863396] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[    9.028032] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[    9.028117] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[    9.028188] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[    9.028257] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[    9.028326] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[    9.113590] gpio_ich: GPIO from 206 to 255 on gpio_ich
[    9.443606] [drm] Memory usable by graphics device = 2048M
[    9.443613] i915 0000:00:02.0: setting latency timer to 64
[    9.449452] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[    9.449458] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    9.449459] [drm] Driver supports precise vblank timestamp query.
[    9.449503] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    9.581012] [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5
[    9.589819] fbcon: inteldrmfb (fb0) is primary device
[    9.655344] Console: switching to colour frame buffer device 128x48
[    9.657020] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    9.657022] i915 0000:00:02.0: registered panic notifier
[    9.657213] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   12.057600] Adding 10286076k swap on /dev/sda6.  Priority:-1 extents:1 across:10286076k
[   12.274120] XFS (sda5): Mounting Filesystem
[   12.528303] XFS (sda5): Ending clean mount
[   30.598875] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   30.599307] sr 0:0:1:0: Attached scsi generic sg1 type 5
[   32.358851] atl1c 0000:02:00.0: irq 44 for MSI/MSI-X
[   34.630194] NFSD: the nfsdcld client tracking upcall will be removed in 3.10. Please transition to using nfsdcltrack.
[   34.630198] NFSD: starting 90-second grace period (net ffffffff81edb300)
[  154.976034] NFSD: Unable to end grace period: -110
[  454.762182] warning: process `VLsetup' used the deprecated sysctl system call with 1.23.
[  458.687068] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[  458.930953] leds_ss4200: no LED devices found
[  512.706074] fuse init (API version 7.21)
[  518.658381] ata1.00: configured for UDMA/100
[  518.680219] ata1.01: configured for UDMA/33
[  518.680222] ata1: EH complete