VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: ATI Driver Installs for VL64-7.0  (Read 2693 times)

langobard

  • Member
  • *
  • Posts: 28
ATI Driver Installs for VL64-7.0
« on: January 10, 2014, 02:04:14 pm »

-------------------------------------------------------------------------------------------------------
KEY
purple- useful macros
red- code entered at the command line.
Blue - files
italics - text added/edited to a file.
-------------------------------------------------------------------------------------------------------
This is the solution I would suggest for someone getting ready to install the drivers, but who has not done so already – in other words,  this is the guide for start to finish installation of ATI desktop-gpu drivers for VL64-7.0.  This same guide is attached as a pdf to this post.

Download the drivers (in this example, Catalyst 13.12) to /home/<username>/ and extract them. 
Backup xconf.org as a different filename. 
Delete all xorg.conf files and all files in /etc/X11/xorg.conf.d/
Add radeon and radeonhd to the blacklists if they are not already there. 
Go into a second session, login as root, install the drivers, run aticonfig, then edit xorg.conf and add the Modes for resolution to the monitor section - these may be different for you ("1920x1080" "2560x1600" etc) and are based on the native resolution of your monitor.
-------------------------------------------------------------------------------------------------------
   Download the ATI Drivers (amd-catalyst-13.12-linux-x86.x86_64.zip) from AMD’s website and put them in /home/<username>/
   Unzip amd-catalyst-13.12-linux-x86.x86_64.zip (should end up with /home/<username>/ amd-catalyst-13.12-linux-x86.x86_64.run)
cp /etc/X11/xorg.conf /etc/X11/roarde
   rm /etc/X11/xorg.conf*
   rm /etc/X11/xorg.conf.d/*
   nano /etc/modprobe.d/blacklist-fglrx.conf
(or blacklist.conf if blacklist-fglrx.conf does not exist)
Add blacklist radeon and blacklist radeonhd if they are not already there.
Save and close.
   Ctl-alt-F2
   Login as root.
init 2
/home/<username>/amd-catalyst-13.12-linux-x86.x86_64.run
   aticonfig --initial
   nano /etx/X11/xorg.conf

Add Modes “1440x900” “1280x800” “1024x768” “800x600” “640x480” to the monitor section, if they are not there already.
Save and exit.
   init 4
   Wait 30s
   ctl-alt-F7
If x-login is presented, success.
Else    (ctl-alt-F3
init 2
Login as root
cp /etc/X11/roarde /etc/X11/xorg.conf
init 4

      )
-------------------------------------------------------------------------------------------------------

Logged
“World domination is such an ugly phrase. I prefer to call it world optimisation.” - HPMOR