Author Topic: VectorLinux 7.1 final has been released!!!!!!  (Read 52677 times)

retired1af

  • Administrator
  • Vectorian
  • *****
  • Posts: 1475
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #45 on: November 30, 2015, 04:55:43 pm »
Nothing wrong with the distro. Have you checked the md5sum to ensure you have a good burn?

ASUS K73 Intel i3 Dual Core 2.3GHz

chaletosuser

  • Member
  • *
  • Posts: 6
  • user
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #46 on: November 30, 2015, 11:22:07 pm »
Nothing wrong with the distro. Have you checked the md5sum to ensure you have a good burn?
nothing wrong with the distro i dont think so , i have download it 4 times on 10mb/per sec lol
and why the hell must i burn for testing in virtualbox ... i never burn iso. all other iso work all .. but that i have always with vector distro so why in the hell load others and this one not haha tell me ...
if you burn the iso vector to dvd , that it than works i dont now , but it must work without burning two ..

i tell you why Slackware Linux is a  Linuxdistributie so it sucks

nightflier

  • Administrator
  • Vectorian
  • *****
  • Posts: 4461
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #47 on: December 01, 2015, 03:53:22 am »
Looks like it is what we call "not a good fit". It happens. :(

Thank you for taking the time to test it anyways, hope other distros may benefit from your testing in the future.

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3499
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #48 on: December 01, 2015, 04:33:42 am »
Didnt answer the question, and the screenie does not show us this is VL in the vm.

For someone who claims they know what they're doing, this sure sounds like a troll

retired1af

  • Administrator
  • Vectorian
  • *****
  • Posts: 1475
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #49 on: December 01, 2015, 05:20:31 am »
Yep, doesn't check md5sum and claims his connection is perfect.

If this is the type of work he does and claims to work with servers, lord help a duck.
ASUS K73 Intel i3 Dual Core 2.3GHz

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3499
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #50 on: December 01, 2015, 05:47:13 am »
Yep, doesn't check md5sum and claims his connection is perfect.

If this is the type of work he does and claims to work with servers, lord help a duck.

* M0E-lnx nods

Megamieuwsel

  • Ex-Officio
  • Vectorite
  • ****
  • Posts: 222
  • Dude In The Snappy Hat
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #51 on: February 06, 2016, 12:27:11 am »
Due to a pile of Hardware-problems it took me this long before I could give it a swirl, but now that I have it running: Looks Mighty fine! =)
Minus: Not having a SAS/Sata Raid controller the notification on startup about the esas2r-driver not loading might be able to cause some panic in newbs... ;-)
And I get a short list of errors that I don't get the time to read. So far nothing that visibly influences the system.

What's slightly more annoying is the following: Network connection sets up just fine, but as soon as I take so much as a look at the network-manager it disconnects and won't re-connect 'till reboot. What's up with that?

On a side-note: Angband and Egoboo won't work on a bare install, so I think these packages need a stern look.
<Lame sig>

Megamieuwsel

  • Ex-Officio
  • Vectorite
  • ****
  • Posts: 222
  • Dude In The Snappy Hat
Re: VectorLinux 7.1 final has been released!!!!!!
« Reply #52 on: February 18, 2016, 06:35:16 am »
Ok, Angband works; Had to enable UTF8-support in the locale (WHY isn't that standard?!?!....)

Egoboo still refuses to create a binary....
<Lame sig>