VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: USB 3.0 device doesn't mount. Please help.  (Read 1702 times)

Locator

  • Vectorian
  • ****
  • Posts: 821
USB 3.0 device doesn't mount. Please help.
« on: July 16, 2015, 08:17:28 pm »

I am using Vector Linux 7.0 as my operating system, and one of the devices that I have is a USB 3.0 Hard drive stick. My computer's motherboard is supposed to be able to recognize USB 3.0 devices (and yes, i have USB 3.0 ports) the problem being is that the USB 3.0 Hard drive doesn't always mount when I plug it in. A solution to that problem would be greatly appreciated. Thanks.
Logged

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3473
Re: USB 3.0 device doesn't mount. Please help.
« Reply #1 on: July 17, 2015, 08:29:11 am »

I doubt 7.0 has USB3 support.

Post the output of
Code: [Select]
zcat /proc/config.gz | grep CONFIG_USB_XHCI_HCD
If you see no output or if your output ends with an 'n', you have no support for it.

I would strongly recommend you update to 7.1

Locator

  • Vectorian
  • ****
  • Posts: 821
Re: USB 3.0 device doesn't mount. Please help.
« Reply #2 on: July 17, 2015, 11:13:09 am »

doctor:$ zcat /proc/config.gz | grep CONFIG_USB_XHCI_HCD
CONFIG_USB_XHCI_HCD=y
# CONFIG_USB_XHCI_HCD_DEBUGGING is not set
Logged

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3473
Re: USB 3.0 device doesn't mount. Please help.
« Reply #3 on: July 17, 2015, 11:35:29 am »

ok in that case,
Code: [Select]
tail -f /var/log/message and and then plug your USB thingie in.
Post the lines that show up there (if any)

Also try 'dmesg' and see if any messages there can tell you something about your USB thingie.

Locator

  • Vectorian
  • ****
  • Posts: 821
Re: USB 3.0 device doesn't mount. Please help.
« Reply #4 on: July 17, 2015, 02:56:21 pm »

doctor:$ tail -f /var/log/messages
Jul 17 14:44:05 vector -- MARK --
Jul 17 15:04:05 vector -- MARK --
Jul 17 15:24:05 vector -- MARK --
Jul 17 15:44:05 vector -- MARK --
Jul 17 16:04:05 vector -- MARK --
Jul 17 16:24:05 vector -- MARK --
Jul 17 16:44:05 vector -- MARK --
Jul 17 17:04:05 vector -- MARK --
Jul 17 17:24:05 vector -- MARK --
Jul 17 17:44:05 vector -- MARK --

The thing is though that when I first installed Vector Linux 7.0 on my computer, it DID recognize my USB 3.0 device.
« Last Edit: July 17, 2015, 03:02:00 pm by Locator »
Logged

Locator

  • Vectorian
  • ****
  • Posts: 821
Re: USB 3.0 device doesn't mount. Please help.
« Reply #5 on: July 17, 2015, 03:04:48 pm »

And the output for "dmesg" is:

doctor:$ dmesg
AM disk image starting at 0.
[    7.729592] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    7.733720] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.738003] hub 1-1:1.0: USB hub found
[    7.742055] hub 1-1:1.0: 6 ports detected
[    7.840324] UDF-fs: No partition found (1)
[    7.847953] usb 2-1: new high speed USB device number 2 using ehci_hcd
[    7.883063] XFS (sda1): Mounting Filesystem
[    7.965898] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    7.970156] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    7.974688] hub 2-1:1.0: USB hub found
[    7.978984] hub 2-1:1.0: 8 ports detected
[    7.997475] XFS (sda1): Ending clean mount
[    8.001778] VFS: Mounted root (xfs filesystem) readonly on device 8:1.
[    8.045436] devtmpfs: mounted
[    8.049790] Freeing unused kernel memory: 632k freed
[    8.054146] Write protecting the kernel text: 8232k
[    8.058376] Write protecting the kernel read-only data: 2720k
[    8.137102] usb 3-4: new high speed USB device number 2 using xhci_hcd
[    8.152397] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[    8.156890] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[    8.165620] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[    8.170171] xhci_hcd 0000:00:14.0: WARN: short transfer on control ep
[    8.174518] usb 3-4: New USB device found, idVendor=152e, idProduct=1640
[    8.178831] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.183126] usb 3-4: Product: SuperMulti RW   
[    8.187341] usb 3-4: Manufacturer: HLDS Inc
[    8.191477] usb 3-4: SerialNumber: 0010101640003B5F5
[    8.195830] scsi8 : usb-storage 3-4:1.0
[    8.272751] usb 1-1.3: new low speed USB device number 3 using ehci_hcd
[    8.365973] usb 1-1.3: New USB device found, idVendor=2188, idProduct=0ae1
[    8.370203] usb 1-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    8.374435] usb 1-1.3: Product:  USB OPTICAL MOUSE
[    8.381192] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input0
[    8.390087] generic-usb 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1a.0-1.3/input0
[    8.472292] usb 1-1.4: new low speed USB device number 4 using ehci_hcd
[    8.562271] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=0021
[    8.567205] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.572073] usb 1-1.4: Product: USB Keykoard
[    8.576853] usb 1-1.4: Manufacturer: USB
[    8.584227] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input1
[    8.594049] generic-usb 0003:1A2C:0021.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keykoard] on usb-0000:00:1a.0-1.4/input0
[    9.139403] bootsplash 3.1.6-2004/03/31: looking for picture...
[    9.144108]  silentjpeg size 77475 bytes,
[    9.149334] ...found (1024x768, 27079 bytes, v3).
[    9.149338] bootsplash: status on console 0 changed to on
[    9.198825] scsi 8:0:0:0: CD-ROM            HL-DT-ST DVDRAM GE20LU10  FE06 PQ: 0 ANSI: 0
[    9.203510] xhci_hcd 0000:00:14.0: WARN: Stalled endpoint
[    9.203645] sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    9.203783] sr 8:0:0:0: Attached scsi CD-ROM sr1
[    9.513912] bootsplash 3.1.6-2004/03/31: looking for picture...
[    9.518620]  silentjpeg size 77475 bytes,
[    9.523859] ...found (1024x768, 27079 bytes, v3).
[    9.523863] bootsplash: status on console 0 changed to on
[    9.714912] bootsplash 3.1.6-2004/03/31: looking for picture...
[    9.719623]  silentjpeg size 77475 bytes,
[    9.724859] ...found (1024x768, 27079 bytes, v3).
[    9.724863] bootsplash: status on console 0 changed to on
[    9.881997] bootsplash 3.1.6-2004/03/31: looking for picture...
[    9.886701]  silentjpeg size 77475 bytes,
[    9.891932] ...found (1024x768, 27079 bytes, v3).
[    9.891936] bootsplash: status on console 0 changed to on
[   10.322271] bootsplash 3.1.6-2004/03/31: looking for picture...
[   10.326985]  silentjpeg size 77475 bytes,
[   10.332215] ...found (1024x768, 27079 bytes, v3).
[   10.332219] bootsplash: status on console 0 changed to on
[   11.885604] udev[1685]: starting version 165
[   12.993337] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[   12.993403] ACPI: Power Button [PWRB]
[   12.993473] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[   12.993500] ACPI: Power Button [PWRF]
[   12.993541] sd 2:0:0:0: Attached scsi generic sg0 type 0
[   12.993576] sr 2:0:1:0: Attached scsi generic sg1 type 5
[   12.993610] sr 8:0:0:0: Attached scsi generic sg2 type 5
[   13.298322] rtc_cmos 00:06: RTC can wake from S4
[   13.298430] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[   13.298459] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[   13.304252] mei: module is from the staging directory, the quality is unknown, you have been warned.
[   13.304393] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   13.304398] mei 0000:00:16.0: setting latency timer to 64
[   13.335384] Linux agpgart interface v0.103
[   13.434283] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   13.530454] thermal LNXTHERM:00: registered as thermal_zone0
[   13.530456] ACPI: Thermal Zone [TZ00] (28 C)
[   13.530618] thermal LNXTHERM:01: registered as thermal_zone1
[   13.530620] ACPI: Thermal Zone [TZ01] (30 C)
[   13.538902] ACPI: Fan [FAN0] (off)
[   13.538933] ACPI: Fan [FAN1] (off)
[   13.538962] ACPI: Fan [FAN2] (off)
[   13.538993] ACPI: Fan [FAN3] (off)
[   13.539025] ACPI: Fan [FAN4] (off)
[   13.539127] ACPI: acpi_idle registered with cpuidle
[   13.539759] Monitor-Mwait will be used to enter C-1 state
[   13.539779] Monitor-Mwait will be used to enter C-3 state
[   13.863142] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   13.863182] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[   13.863204] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   13.966173] Linux video capture interface: v2.00
[   14.473670] ivtv: Start initialization, version 1.4.2
[   14.473700] ivtv0: Initializing card 0
[   14.473702] ivtv0: Autodetected ASUS Falcon2 card (cx23416 based)
[   14.473784] ivtv 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   14.473794] ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
[   14.665887] cx25840 1-0044: cx25843-24 found @ 0x88 (ivtv i2c driver #0)
[   14.772220] i2c-core: driver [tuner] using legacy suspend method
[   14.772223] i2c-core: driver [tuner] using legacy resume method
[   15.074714] tda9887 1-0043: creating new instance
[   15.074716] tda9887 1-0043: tda988[5/6/7] found
[   15.075817] tuner 1-0043: Tuner 74 found with type(s) Radio TV.
[   15.096807] All bytes are equal. It is not a TEA5767
[   15.096811] tuner 1-0060: Tuner -1 found with type(s) Radio TV.
[   15.123125] m52790 1-0048: chip found @ 0x90 (ivtv i2c driver #0)
[   15.278798] tuner-simple 1-0060: creating new instance
[   15.278800] tuner-simple 1-0060: type set to 43 (Philips NTSC MK3 (FM1236MK3 or FM1236/F))
[   15.281159] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[   15.281173] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[   15.281191] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[   15.281203] ivtv0: Registered device video24 for encoder PCM (320 kB)
[   15.281215] ivtv0: Registered device radio0 for encoder radio
[   15.281216] ivtv0: Initialized card: ASUS Falcon2
[   15.281224] ivtv: End initialization
[   15.378113] nvidia: module license 'NVIDIA' taints kernel.
[   15.378116] Disabling lock debugging due to kernel taint
[   15.523157] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   15.523162] nvidia 0000:01:00.0: setting latency timer to 64
[   15.523166] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[   15.523222] NVRM: loading NVIDIA UNIX x86 Kernel Module  304.88  Wed Mar 27 14:31:12 PDT 2013
[   16.041591] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   16.240622] ivtv0: Encoder revision: 0x02060039
[   18.577564] generic-usb 0003:1A2C:0021.0003: usb_submit_urb(ctrl) failed
[   18.577570] generic-usb 0003:1A2C:0021.0003: timeout initializing reports
[   18.577640] input: USB USB Keykoard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.1/input/input4
[   18.577711] generic-usb 0003:1A2C:0021.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keykoard] on usb-0000:00:1a.0-1.4/input1
[   18.650350] usb 2-1.5: new high speed USB device number 3 using ehci_hcd
[   18.754169] usb 2-1.5: New USB device found, idVendor=1737, idProduct=0077
[   18.754171] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   18.754173] usb 2-1.5: Product: 802.11 g WLAN
[   18.754175] usb 2-1.5: Manufacturer: Ralink
[   18.754176] usb 2-1.5: SerialNumber: 1.0
[   19.081044] cfg80211: Calling CRDA to update world regulatory domain
[   19.253516] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[   19.253639] Registered led device: rt2800usb-phy0::radio
[   19.253651] Registered led device: rt2800usb-phy0::assoc
[   19.253662] Registered led device: rt2800usb-phy0::quality
[   19.253957] usbcore: registered new interface driver rt2800usb
[   19.970350] cx25840 1-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
[   20.406802] bootsplash 3.1.6-2004/03/31: looking for picture...
[   20.411518]  silentjpeg size 77475 bytes,
[   20.416755] ...found (1024x768, 27079 bytes, v3).
[   20.416759] bootsplash: status on console 0 changed to on
[   20.600046] bootsplash 3.1.6-2004/03/31: looking for picture...
[   20.604756]  silentjpeg size 77475 bytes,
[   20.609986] ...found (1024x768, 27079 bytes, v3).
[   20.609990] bootsplash: status on console 0 changed to on
[   21.679259] bootsplash 3.1.6-2004/03/31: looking for picture...
[   21.683970]  silentjpeg size 77475 bytes,
[   21.689209] ...found (1024x768, 27079 bytes, v3).
[   21.689213] bootsplash: status on console 0 changed to on
[   21.873397] bootsplash 3.1.6-2004/03/31: looking for picture...
[   21.878107]  silentjpeg size 77475 bytes,
[   21.883336] ...found (1024x768, 27079 bytes, v3).
[   21.883340] bootsplash: status on console 0 changed to on
[   22.046865] bootsplash 3.1.6-2004/03/31: looking for picture...
[   22.051571]  silentjpeg size 77475 bytes,
[   22.056799] ...found (1024x768, 27079 bytes, v3).
[   22.056803] bootsplash: status on console 0 changed to on
[   22.271775] bootsplash 3.1.6-2004/03/31: looking for picture...
[   22.276530]  silentjpeg size 77475 bytes,
[   22.281760] ...found (1024x768, 27079 bytes, v3).
[   22.281765] bootsplash: status on console 0 changed to on
[   22.599831] bootsplash 3.1.6-2004/03/31: looking for picture...
[   22.604533]  silentjpeg size 77475 bytes,
[   22.609813] ...found (1024x768, 27079 bytes, v3).
[   22.609817] bootsplash: status on console 0 changed to on
[   22.768498] bootsplash 3.1.6-2004/03/31: looking for picture...
[   22.773214]  silentjpeg size 77475 bytes,
[   22.778592] ...found (1024x768, 27079 bytes, v3).
[   22.778596] bootsplash: status on console 0 changed to on
[   23.134608] bootsplash 3.1.6-2004/03/31: looking for picture...
[   23.139319]  silentjpeg size 77475 bytes,
[   23.144837] ...found (1024x768, 27079 bytes, v3).
[   23.144842] bootsplash: status on console 0 changed to on
[   23.488903] bootsplash 3.1.6-2004/03/31: looking for picture...
[   23.493622]  silentjpeg size 77475 bytes,
[   23.499040] ...found (1024x768, 27079 bytes, v3).
[   23.499044] bootsplash: status on console 0 changed to on
[   23.769749] bootsplash 3.1.6-2004/03/31: looking for picture...
[   23.774870]  silentjpeg size 77475 bytes,
[   23.780104] ...found (1024x768, 27079 bytes, v3).
[   23.780108] bootsplash: status on console 0 changed to on
[   23.976761] bootsplash 3.1.6-2004/03/31: looking for picture...
[   23.981468]  silentjpeg size 77475 bytes,
[   23.986705] ...found (1024x768, 27079 bytes, v3).
[   23.986709] bootsplash: status on console 0 changed to on
[   24.309583] bootsplash 3.1.6-2004/03/31: looking for picture...
[   24.314301]  silentjpeg size 77475 bytes,
[   24.319530] ...found (1024x768, 27079 bytes, v3).
[   24.319534] bootsplash: status on console 0 changed to on
[   24.832275] bootsplash 3.1.6-2004/03/31: looking for picture...
[   24.836981]  silentjpeg size 77475 bytes,
[   24.842218] ...found (1024x768, 27079 bytes, v3).
[   24.842222] bootsplash: status on console 0 changed to on
[   25.053884] bootsplash 3.1.6-2004/03/31: looking for picture...
[   25.058601]  silentjpeg size 77475 bytes,
[   25.063830] ...found (1024x768, 27079 bytes, v3).
[   25.063834] bootsplash: status on console 0 changed to on
[   25.217783] bootsplash 3.1.6-2004/03/31: looking for picture...
[   25.222498]  silentjpeg size 77475 bytes,
[   25.227732] ...found (1024x768, 27079 bytes, v3).
[   25.227736] bootsplash: status on console 0 changed to on
[   26.646407] bootsplash 3.1.6-2004/03/31: looking for picture...
[   26.651118]  silentjpeg size 77475 bytes,
[   26.656410] ...found (1024x768, 27079 bytes, v3).
[   26.656415] bootsplash: status on console 0 changed to on
[   31.393642] cpufreq-nforce2: No nForce2 chipset.
[   31.512621] powernow: This module only works with AMD K7 CPUs
[   31.667357] bootsplash 3.1.6-2004/03/31: looking for picture...
[   31.672075]  silentjpeg size 77475 bytes,
[   31.677309] ...found (1024x768, 27079 bytes, v3).
[   31.677313] bootsplash: status on console 0 changed to on
[   31.849056] bootsplash 3.1.6-2004/03/31: looking for picture...
[   31.853776]  silentjpeg size 77475 bytes,
[   31.859024] ...found (1024x768, 27079 bytes, v3).
[   31.859028] bootsplash: status on console 0 changed to on
[   32.074442] bootsplash 3.1.6-2004/03/31: looking for picture...
[   32.079152]  silentjpeg size 77475 bytes,
[   32.084391] ...found (1024x768, 27079 bytes, v3).
[   32.084394] bootsplash: status on console 0 changed to on
[   32.311528] bootsplash 3.1.6-2004/03/31: looking for picture...
[   32.316235]  silentjpeg size 77475 bytes,
[   32.321468] ...found (1024x768, 27079 bytes, v3).
[   32.321472] bootsplash: status on console 0 changed to on
[   33.345553] bootsplash 3.1.6-2004/03/31: looking for picture...
[   33.350264]  silentjpeg size 77475 bytes,
[   33.355495] ...found (1024x768, 27079 bytes, v3).
[   33.355499] bootsplash: status on console 0 changed to on
[   33.757625] bootsplash 3.1.6-2004/03/31: looking for picture...
[   33.762483]  silentjpeg size 77475 bytes,
[   33.767724] ...found (1024x768, 27079 bytes, v3).
[   33.767729] bootsplash: status on console 0 changed to on
[   34.008816] bootsplash 3.1.6-2004/03/31: looking for picture...
[   34.013544]  silentjpeg size 77475 bytes,
[   34.018789] ...found (1024x768, 27079 bytes, v3).
[   34.018793] bootsplash: status on console 0 changed to on
[   34.173603] bootsplash 3.1.6-2004/03/31: looking for picture...
[   34.178326]  silentjpeg size 77475 bytes,
[   34.183565] ...found (1024x768, 27079 bytes, v3).
[   34.183569] bootsplash: status on console 0 changed to on
[   34.424434] bootsplash 3.1.6-2004/03/31: looking for picture...
[   34.429169]  silentjpeg size 77475 bytes,
[   34.434406] ...found (1024x768, 27079 bytes, v3).
[   34.434410] bootsplash: status on console 0 changed to on
[   34.609015] bootsplash 3.1.6-2004/03/31: looking for picture...
[   34.613740]  silentjpeg size 77475 bytes,
[   34.618977] ...found (1024x768, 27079 bytes, v3).
[   34.618981] bootsplash: status on console 0 changed to on
[   34.815783] bootsplash 3.1.6-2004/03/31: looking for picture...
[   34.820506]  silentjpeg size 77475 bytes,
[   34.825748] ...found (1024x768, 27079 bytes, v3).
[   34.825752] bootsplash: status on console 0 changed to on
[   35.723291] bootsplash 3.1.6-2004/03/31: looking for picture...
[   35.728056]  silentjpeg size 77475 bytes,
[   35.733300] ...found (1024x768, 27079 bytes, v3).
[   35.733304] bootsplash: status on console 0 changed to on
[   35.961487] bootsplash 3.1.6-2004/03/31: looking for picture...
[   35.966205]  silentjpeg size 77475 bytes,
[   35.971618] ...found (1024x768, 27079 bytes, v3).
[   35.971623] bootsplash: status on console 0 changed to on
[   39.194894] bootsplash 3.1.6-2004/03/31: looking for picture...
[   39.199773]  silentjpeg size 77475 bytes,
[   39.205142] ...found (1024x768, 27079 bytes, v3).
[   39.205147] bootsplash: status on console 0 changed to on
[   39.545485] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[   39.545491] NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
[   39.545492] NFSD: starting 90-second grace period
[   40.646133] fuse init (API version 7.16)
[   42.083644] bootsplash 3.1.6-2004/03/31: looking for picture...
[   42.088355]  silentjpeg size 77475 bytes,
[   42.093593] ...found (1024x768, 27079 bytes, v3).
[   42.093597] bootsplash: status on console 0 changed to on
[   47.671463] NVRM: Your system is not currently configured to drive a VGA console
[   47.671466] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[   47.671468] NVRM: requires the use of a text-mode VGA console. Use of other console
[   47.671469] NVRM: drivers including, but not limited to, vesafb, may result in
[   47.671471] NVRM: corruption and stability problems, and is not supported.
[   50.073555] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[   50.074937] wlan0: authenticated
[   50.074957] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[   50.080070] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[   50.080075] wlan0: associated
[ 5308.154918] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 5308.200510] cfg80211: Calling CRDA to update world regulatory domain
[ 5309.562593] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 5309.564012] wlan0: authenticated
[ 5309.578670] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 5309.581215] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 5309.581220] wlan0: associated
[ 5311.712394] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 5311.763423] cfg80211: Calling CRDA to update world regulatory domain
[ 5320.975671] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 5320.991675] wlan0: authenticated
[ 5320.995715] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 5321.194666] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 5321.213255] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 5321.213262] wlan0: associated
[ 6309.156614] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 6309.197186] cfg80211: Calling CRDA to update world regulatory domain
[ 6310.559360] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6310.560744] wlan0: authenticated
[ 6310.560766] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6310.563493] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6310.563499] wlan0: associated
[ 6311.778274] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 6311.826768] cfg80211: Calling CRDA to update world regulatory domain
[ 6320.961288] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6320.962773] wlan0: authenticated
[ 6320.976970] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6320.979510] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6320.979516] wlan0: associated
[ 6474.674941] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 6474.719446] cfg80211: Calling CRDA to update world regulatory domain
[ 6476.081655] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6476.083039] wlan0: authenticated
[ 6476.083061] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6476.089434] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6476.089441] wlan0: associated
[ 6479.279374] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 6479.336226] cfg80211: Calling CRDA to update world regulatory domain
[ 6488.474831] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6488.476214] wlan0: authenticated
[ 6488.490409] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6488.689792] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 6488.694734] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6488.694740] wlan0: associated
[ 6622.315700] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 6622.365315] cfg80211: Calling CRDA to update world regulatory domain
[ 6623.728396] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6623.729783] wlan0: authenticated
[ 6623.729806] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6623.732706] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6623.732712] wlan0: associated
[ 6626.851610] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 6626.900205] cfg80211: Calling CRDA to update world regulatory domain
[ 6636.102631] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 6636.104012] wlan0: authenticated
[ 6636.118242] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 6636.121858] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 6636.121863] wlan0: associated
[ 9022.315210] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 9022.356769] cfg80211: Calling CRDA to update world regulatory domain
[ 9031.982196] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9031.983558] wlan0: authenticated
[ 9031.997754] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9032.000298] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9032.000303] wlan0: associated
[ 9213.641794] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 9213.691395] cfg80211: Calling CRDA to update world regulatory domain
[ 9215.053481] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9215.054906] wlan0: authenticated
[ 9215.069557] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9215.075573] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9215.075579] wlan0: associated
[ 9215.260146] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 9215.277989] cfg80211: Calling CRDA to update world regulatory domain
[ 9224.496333] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9224.498239] wlan0: authenticated
[ 9224.502211] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9224.505710] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9224.505715] wlan0: associated
[ 9350.237012] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 9350.284526] cfg80211: Calling CRDA to update world regulatory domain
[ 9351.646736] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9351.648743] wlan0: authenticated
[ 9351.662833] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9351.665339] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9351.665345] wlan0: associated
[ 9352.849198] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 9352.894202] cfg80211: Calling CRDA to update world regulatory domain
[ 9361.987717] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9361.989204] wlan0: authenticated
[ 9362.003398] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9362.005946] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9362.005952] wlan0: associated
[ 9383.140426] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 9383.182017] cfg80211: Calling CRDA to update world regulatory domain
[ 9384.544104] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9384.545489] wlan0: authenticated
[ 9384.560327] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9384.759666] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9384.959083] wlan0: associate with c8:d3:a3:53:fb:d2 (try 3)
[ 9385.158497] wlan0: association with c8:d3:a3:53:fb:d2 timed out
[ 9394.975923] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9395.175106] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 2)
[ 9395.179503] wlan0: authenticated
[ 9395.183560] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9395.382497] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9395.581929] wlan0: associate with c8:d3:a3:53:fb:d2 (try 3)
[ 9395.781340] wlan0: association with c8:d3:a3:53:fb:d2 timed out
[ 9406.207513] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 1/3)
[ 9406.406147] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 2/3)
[ 9406.605567] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 3/3)
[ 9406.804981] wlan0: direct probe to c8:d3:a3:53:fb:d2 timed out
[ 9417.439603] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 1/3)
[ 9417.638187] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 2/3)
[ 9417.837606] wlan0: direct probe to c8:d3:a3:53:fb:d2 (try 3/3)
[ 9418.037017] wlan0: direct probe to c8:d3:a3:53:fb:d2 timed out
[ 9428.671812] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9428.673201] wlan0: authenticated
[ 9428.673222] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9428.872216] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9429.071678] wlan0: associate with c8:d3:a3:53:fb:d2 (try 3)
[ 9429.271056] wlan0: association with c8:d3:a3:53:fb:d2 timed out
[ 9435.068999] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9435.070402] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 9437.552966] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9437.752174] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 2)
[ 9437.753622] wlan0: authenticated
[ 9437.768062] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9437.966538] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9438.165958] wlan0: associate with c8:d3:a3:53:fb:d2 (try 3)
[ 9438.365353] wlan0: association with c8:d3:a3:53:fb:d2 timed out
[ 9448.784786] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9448.786170] wlan0: authenticated
[ 9448.786191] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9448.985197] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9448.988880] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9448.988886] wlan0: associated
[ 9452.935618] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[ 9452.953566] cfg80211: Calling CRDA to update world regulatory domain
[ 9454.316516] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9454.317899] wlan0: authenticated
[ 9454.317921] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9454.516971] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[ 9454.716390] wlan0: associate with c8:d3:a3:53:fb:d2 (try 3)
[ 9454.915803] wlan0: association with c8:d3:a3:53:fb:d2 timed out
[ 9471.779279] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9471.783296] wlan0: authenticated
[ 9471.787254] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9471.789799] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9471.789805] wlan0: associated
[ 9478.243661] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[ 9478.287297] cfg80211: Calling CRDA to update world regulatory domain
[ 9481.091392] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[ 9481.092774] wlan0: authenticated
[ 9481.106997] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[ 9481.111113] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[ 9481.111119] wlan0: associated
[10145.902202] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[10145.947716] cfg80211: Calling CRDA to update world regulatory domain
[10147.310052] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[10147.311436] wlan0: authenticated
[10147.311458] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[10147.510467] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[10147.521608] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[10147.521614] wlan0: associated
[10148.514511] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[10148.567365] cfg80211: Calling CRDA to update world regulatory domain
[10157.736758] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[10157.738797] wlan0: authenticated
[10157.742758] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[10157.941864] wlan0: associate with c8:d3:a3:53:fb:d2 (try 2)
[10157.948430] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[10157.948437] wlan0: associated
[11113.064192] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[11113.113734] cfg80211: Calling CRDA to update world regulatory domain
[11122.942663] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[11122.944038] wlan0: authenticated
[11122.958116] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[11122.960614] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[11122.960617] wlan0: associated
[11874.827914] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[11874.872425] cfg80211: Calling CRDA to update world regulatory domain
[11876.234602] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[11876.235984] wlan0: authenticated
[11876.236007] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[11876.238751] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[11876.238756] wlan0: associated
[11879.439925] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[11879.490325] cfg80211: Calling CRDA to update world regulatory domain
[11888.679626] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[11888.681006] wlan0: authenticated
[11888.695223] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[11888.700215] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[11888.700218] wlan0: associated
[13578.832727] ieee80211 phy0: wlan0: No probe response from AP c8:d3:a3:53:fb:d2 after 500ms, disconnecting.
[13578.874372] cfg80211: Calling CRDA to update world regulatory domain
[13580.237454] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[13580.238838] wlan0: authenticated
[13580.238861] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[13580.241760] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[13580.241766] wlan0: associated
[13582.439246] wlan0: deauthenticating from c8:d3:a3:53:fb:d2 by local choice (reason=3)
[13582.487979] cfg80211: Calling CRDA to update world regulatory domain
[13591.680318] wlan0: authenticate with c8:d3:a3:53:fb:d2 (try 1)
[13591.681683] wlan0: authenticated
[13591.696021] wlan0: associate with c8:d3:a3:53:fb:d2 (try 1)
[13591.702010] wlan0: RX AssocResp from c8:d3:a3:53:fb:d2 (capab=0x431 status=0 aid=1)
[13591.702016] wlan0: associated
Logged