Author Topic: VL-7.2-STD-B1 menu issue (Read 5085 times)

jsalpha2 · « **on:** July 03, 2016, 07:59:54 am »

Fresh install from VL-7.2-STD-B1.iso. So I don't like the Whisker menu. No problem, remove it and replace it with the old Application Menu. Now a problem, after rebooting the Application menu does not work. Clicking on it results in a flashing, no menu pops up sometimes the whole panel disappears. Put Whisker back, everything works fine. Need a quick fix. Thanks

wigums · « **Reply #1 on:** July 04, 2016, 06:50:14 pm »

with the whisker menu can you go to menu -> settings -> appearance
change the style and then try the regular application menu again?

M0E-lnx · « **Reply #2 on:** July 05, 2016, 08:16:48 am »

I'm unable to reproduce this.
This is my 32-bit install after removing whiskermenu and replacing it with the old applications menu.
http://i.imgur.com/dJCNJL3.png

Can anyone else reproduce it?

nightflier · « **Reply #3 on:** July 05, 2016, 09:03:52 am »

Old applications menu works on my machine.

A good test would be to create a new user and see if problem persists in the new profile.

M0E-lnx · « **Reply #4 on:** July 05, 2016, 11:53:49 am »

A new account should get the default whiskermenu setup. Id still be interested on the results though

jsalpha2 · « **Reply #5 on:** July 06, 2016, 04:29:06 am »

Tried re-installing. Actually tried both the 32 and 64 bit versions. The problem seems to be gone.
Thanks for the help. I am going to keep the VL64 just because 64 seems better than 32, (I can't see much
difference in real life.

VectorLinux

News:

Author Topic: VL-7.2-STD-B1 menu issue (Read 5085 times)

jsalpha2

VL-7.2-STD-B1 menu issue

wigums

Re: VL-7.2-STD-B1 menu issue

M0E-lnx

Re: VL-7.2-STD-B1 menu issue

nightflier

Re: VL-7.2-STD-B1 menu issue

M0E-lnx

Re: VL-7.2-STD-B1 menu issue

jsalpha2

Re: VL-7.2-STD-B1 menu issue