Author Topic: VL-7.2-STD-B1 menu issue  (Read 3508 times)

jsalpha2

  • Member
  • *
  • Posts: 9
VL-7.2-STD-B1 menu issue
« on: July 03, 2016, 07:59:54 am »
Fresh install from VL-7.2-STD-B1.iso.  So I don't like the Whisker menu.  No problem, remove it and replace it with the old Application Menu.  Now a problem, after rebooting the Application menu does not work.  Clicking on it results in a flashing, no menu pops up sometimes the whole panel disappears.  Put Whisker back, everything works fine.  Need a quick fix.  Thanks

wigums

  • Guest
Re: VL-7.2-STD-B1 menu issue
« Reply #1 on: July 04, 2016, 06:50:14 pm »
with the whisker menu can you go to menu -> settings -> appearance
change the style and then try the regular application menu again?

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3497
Re: VL-7.2-STD-B1 menu issue
« Reply #2 on: July 05, 2016, 08:16:48 am »
I'm unable to reproduce this.
This is my 32-bit install after removing whiskermenu and replacing it with the old applications menu.
http://i.imgur.com/dJCNJL3.png

Can anyone else reproduce it?

nightflier

  • Administrator
  • Vectorian
  • *****
  • Posts: 4459
Re: VL-7.2-STD-B1 menu issue
« Reply #3 on: July 05, 2016, 09:03:52 am »
Old applications menu works on my machine.

A good test would be to create a new user and see if problem persists in the new profile.

M0E-lnx

  • Administrator
  • Vectorian
  • *****
  • Posts: 3497
Re: VL-7.2-STD-B1 menu issue
« Reply #4 on: July 05, 2016, 11:53:49 am »
A new account should get the default whiskermenu setup.  Id still be interested on the results though

jsalpha2

  • Member
  • *
  • Posts: 9
Re: VL-7.2-STD-B1 menu issue
« Reply #5 on: July 06, 2016, 04:29:06 am »
Tried re-installing.  Actually tried both the 32 and 64 bit versions.  The problem seems to be gone.
Thanks for the help.  I am going to keep the VL64 just because 64 seems better than 32, (I can't see much
difference in real life.