Please support VectorLinux!

Author Topic: remote machine  (Read 3155 times)

desmogiallo

  • Member
  • *
  • Posts: 15
remote machine
« on: May 11, 2007, 11:50:04 am »
Hi.
I have an old pc (amd k6 200 mhz, 64 mb ram) and I'd like to use it as a router.
Here's the sketch of what I'm thinking abaut:

(router) - ethernet switch ---------pc 1 (linux)
                                    \--------laptop (linux)
                                    \--------laptop (whatever)
                                    \--------??

The fact is...can I use the router without monitor/keyboard/mouse? In other words, my idea is to use a graphic remote control (on pc1) in order to activate the router.
On pc1 I use the latest Vectorlinux, while on the "router" there's the Vector 5.1 already installed. Yet I could just leave the router without a gui-mode, but I could set some useful apps as well, even if it's not a powerful machine.

Is that possible? And...how
:) thanks

rbistolfi

  • Packager
  • Vectorian
  • ****
  • Posts: 2299
Re: remote machine
« Reply #1 on: May 11, 2007, 12:20:23 pm »
Yes, you can do that, there is a lot of linux distros specialy made with this porpouse, check this:
http://librenix.com/?inode=3585
You can find more with google. Will be a lot more easy than configure VL5.1 to do the same thing. Just my idea. In other hand, that hardware is too good for a router mini-distro. So, I would do that: get an older 486 with 32mb, configure a router distro on it, and make that k6 the pc #5.
Hope this help, please post back if dont, and let us know how it goes...

EDIT: here is the project home:
http://www.devil-linux.org/home/index.php
« Last Edit: May 11, 2007, 01:17:15 pm by rbistolfi »
"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!