VectorLinux
October 25, 2014, 07:15:01 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: installing vector on an usb stick  (Read 2176 times)
bufny
Member
*
Posts: 1


« on: June 16, 2007, 03:06:55 am »



First, sorry if answering in the wrong place, second sorry for my English, third sorry if I'm asking something stupid that is already somewhere in this forum.

I'm trying to install vector on my newly received 4 gb usb pen drive. In general, the stick should appear as a /dev/sdX disk, but the installation boot kernel lack the USB support so, Sad there is no /dev/sdX pointed to my USB pendrvie, only the /dev/sda pointed to my sata hard drive).

What I have manage to do is boot Cheesy the installation process from the stick, that was easy, I copy the isolinux directory from the .iso installation CD to the pen drive root directory, I syslinux my pen drive, rename the isolinux.cfg file in syslinux.cfg, and there I was, I was able too boot from the peen, found the dvddrive as the installation media, but off course no usb and no other drive to fdisk beside my hda drive.

Ok, so I guess I need a boot kernel with usb support in the setup process.  To start with something, can you point me to the kernel source use for building the scsi and sata kernels for the 5.8 standard edition (the ones in the /isolinux/kernel directory)?

And other question, is there some sort of a default file system put in the boot kernel image (the file systems that is loaded in /dev/ram) or this file system is loaded from another image file? If so, what file?

If I'll succeed I’ll make a nice wiki Cheesy

thanks

bufny
Logged
Joe1962
Administrator
Vectorian
*****
Posts: 2499



WWW
« Reply #1 on: June 16, 2007, 08:21:06 am »

Moved to a more appropriate place. Sorry I can't help, but somebody who can should be along soon... Wink
Logged

O'Neill (RE the Asgard): "Usually they ask nicely before they ignore us and do what they damn well please."
http://joe1962.bigbox.info
Running: VL 7 Std 64 + self-cooked XFCE-4.10
uelsk8s
Administrator
Vectorian
*****
Posts: 2504



« Reply #2 on: June 16, 2007, 08:58:05 am »

the later kernels used for SOHO should have the support you need for the pendrive.
you can find them here http://vectorlinux.osuosl.org/veclinux-soho-5.8/kernels/
the 2.6.21.1 kernel is probably your best bet.

HTH,
Uelsk8s
Logged
thegeekster
Member
*
Posts: 17


« Reply #3 on: June 22, 2007, 04:58:56 am »

...And other question, is there some sort of a default file system put in the boot kernel image (the file systems that is loaded in /dev/ram) or this file system is loaded from another image file? If so, what file?...


Typically, CDs use an initial ramdisk, usually called initrd, which is the root filesystem used  by the kernel and is usually formatted with the ext2fs...........Although I've seen them formatted with ext3, but the resulting image is larger than it needs to be due to the extra space requirements for the journal.... Smiley

HTH
---thegeekster
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!