VectorLinux
November 23, 2014, 11:53:30 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: Lisa daemon not running. How can I start it ?  (Read 2262 times)
demigaucher
Member
*
Posts: 58


« on: June 17, 2007, 12:10:29 pm »

Hi all

I have a small network, with four machines on a four-ports router. Three are under
windows (wife and kids not yet touched by civilization, alas Angry  ), and the fourth one
(mine) under VL5.8SOHO-final  Cool 

I have a printer connected to my machine (it works locally OK). So I want to print
from the three other computers (and exchange files too).  As a first step, It works
if I boot my machine under windows 2000 (dual boot), which establishes that there
are no problem due to firewalls under windows, and that the hardware works perfect.

But I could not print from any of the three machines under windows if my computer is
under VL. And I desperately want to be free from windows as soon as possible !

I tried the following:

From my machine under VL, I can ping all the three other (I obtained their IP adresses
simply reading the DHCP files in the router).

I can see their directories by typing in Konqueror  smb://their_IP_adress, for
example: smb://192.168.1.101 and even browse in them if they are shared.

Now, if under Konqueror, I click on "services" in the left half of the browser, and then
click on  "network browse" (I translate back brom french, could be slightly different
in english), I got the  message that the Lisa daemon is not running.

I localized lisa in /opt/kde/bin/lisa, but if I try to start it by hand in console as
root, I get:

root:# /opt/kde/bin/lisa
configfile not found
use the command line option --help and
take a look at the README for more information

I googled "configfile not found": some file named "lisarc" should be present, but
I could not find it in my computer.


Does somebody know:
1) how to manage to have Lisa running (BTW: is it necessary to print ?). Do I have to
create a "lisarc" file ? etc...
2) If Lisa is necessary, how to have it started automatically at boot ?


Demigaucher
old P3@700 MHz, VL5.8SOHO-final

Logged
bigpaws
Vectorian
****
Posts: 1857


« Reply #1 on: June 17, 2007, 01:34:43 pm »

Quote
BTW: is it necessary to print ?

No it is not necessary to print.

Setup samba and then add the printers share.

You can search the forum or google slackware simple samba.

HTH

Bigpaws
Logged
demigaucher
Member
*
Posts: 58


« Reply #2 on: June 18, 2007, 10:47:08 pm »

Thank you bigpaws, I'll try.

Demigaucher
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!