Please login or register.

Login with username, password and session length
Advanced search  


Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: install a second hard disk  (Read 2548 times)


  • Member
  • *
  • Posts: 67
install a second hard disk
« on: July 06, 2007, 06:47:02 pm »

Hi all

Using VL 5.8 standard - Want to add a second hard disk  - how to  do this ?

Triarius Fidelis

  • Vecteloper
  • Vectorian
  • ****
  • Posts: 2399
  • Domine, exaudi vocem meam
    • my website
Re: install a second hard disk
« Reply #1 on: July 06, 2007, 07:10:59 pm »

The hardware part is the same.

You must tell us how you shall install it (e.g., IDE primary slave)
"Leatherface, you BITCH! Ho Chi Minh, hah hah hah!"

Formerly known as "Epic Fail Guy" and "Döden" in recent months


  • Tester
  • Vectorian
  • ****
  • Posts: 1083
Re: install a second hard disk
« Reply #2 on: July 06, 2007, 09:55:10 pm »

hanumizzle is right if you want specific info but if you just connect the drive VL will detect it unless it replaces the current primary boot drive. Thus if your current HD is IDE primary master and your BIOS is set to boot from that drive then the place on the controller that you attach it to will determine the /dev/xxx designation. Then it is a simple matter of formating and mounting the partitions you choose to define.
The plans of the diligent lead to profit...Pro. 21:5
 VL64 7.1                                     RLU 486143