VectorLinux
October 21, 2014, 10:19:21 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: 1 [2]
  Print  
Author Topic: help installing for really newbie  (Read 7118 times)
caitlyn
Packager
Vectorian
****
Posts: 2876


WWW
« Reply #15 on: July 07, 2007, 01:57:24 pm »

How are you trying to mount the CD?  Without seeing errors we really can't help you.  Try this:

Open a terminal window and become root.  Insert a data CD.
Type in:
Quote
mount /mnt/cdrom
What do you get in response?  If you get an error please post it here.  If you get nothing nothing (just a prompt) does an:
Quote
ls /mnt/cdrom

then show the contents of the CD-ROM?

I suspect we may be dealing with something as simple as a permissions issue.
Logged

eMachines EL-1300G desktop, 1.6GHz AMD Athlon 2650e CPU, 4GB RAM, nVidia GeForce 6150 SE video
CentOS 6.5 (will try VL64-7.1 soon)

Toshiba Satellite A135-S4727,  Intel Pentium T2080 / 1.73 GHz, 2GB RAM, Intel GMA 950

HP Mini 110 netbook, 1.6GHz Intel Atom CPU, 2GB RAM, Intel 950 video, VL 7.1
ekonik3
Member
*
Posts: 11


« Reply #16 on: July 10, 2007, 05:37:37 pm »

i've already done the mount /mnt/cdrom/ here is the message from it:
root:# mount /mnt/cdrom
mount: wrong fs type, bad option, bad superblock on /dev/cdrom,
       missing codepage or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so



and this one is message when i'm doing dmesg:
root:# dmesg
Linux version 2.6.18.5 (root@vector.linux.net) (gcc version 3.4.6) #2 SMP PREEMPT Sat Dec 9 19:01:25 MST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000007ffdc40 (usable)
 BIOS-e820: 0000000007ffdc40 - 0000000008000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
127MB LOWMEM available.
On node 0 totalpages: 32765
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 28669 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 IBM                                   ) @ 0x000fdfe0
ACPI: RSDT (v001 IBM    CDTPWSNH 0x00001000 IBM  0x00000000) @ 0x07ffff80
ACPI: FADT (v001 IBM    CDTPWSNH 0x00001000 IBM  0x00000000) @ 0x07ffff00
ACPI: DSDT (v001 IBM    CDTPWSNH 0x00001000 MSFT 0x01000007) @ 0x00000000
ACPI: PM-Timer IO Port: 0xfd08
Allocating PCI resources starting at 10000000 (gap: 08000000:f6c00000)
Detected 333.356 MHz processor.
Built 1 zonelists.  Total pages: 32765
Kernel command line: BOOT_IMAGE=linux ro root=301
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (01109000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 512 (order: 9, 2048 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 124296k/131060k available (3139k kernel code, 6236k reserved, 1229k data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 667.30 BogoMIPS (lpj=333652)Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0a00)
CPU0: Intel Pentium II (Deschutes) stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd86c, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region fd00-fd3f claimed by PIIX4 ACPI
PCI quirk: region fe00-fe0f claimed by PIIX4 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [PIN1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [PIN2] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN3] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [PIN4] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Bridge: 0000:00:01.0
  IO window: disabled.
  MEM window: f4000000-f7ffffff
  PREFETCH window: 10000000-100fffff
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 49152 bytes)
TCP bind hash table entries: 2048 (order: 2, 24576 bytes)
TCP: Hash tables configured (established 4096 bind 2048)
TCP reno registered
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabledSGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:02.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:pio, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 90645D3, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: SAMSUNG CD-ROM SC-140F FM03, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 12594960 sectors (6448 MB) w/512KiB Cache, CHS=12495/16/63, UDMA(33)
hda: cache flushes not supported
 hda: hda1 hda2 hda3
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2409]-mh2)
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
libata version 2.00 loaded.
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20050830, fixed bufsize 32768, s/g segs 256
usbmon: debugfs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [PIN4] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [PIN4] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:02.2: UHCI Host Controller
uhci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:02.2: irq 11, io base 0x0000ff00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 296k freed
input: AT Translated Set 2 keyboard as /class/input/input0
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
Adding 249976k swap on /dev/hda2.  Priority:-1 extents:1 across:249976k
input: PC Speaker as /class/input/input2
piix4_smbus 0000:00:02.3: Found 0000:00:02.3 device
piix4_smbus 0000:00:02.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:02.3 failed with error -1
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
fuse init (API version 7.Cool
fuse distribution version: 2.6.1
powernow: This module only works with AMD K7 CPUs
spurious 8259A interrupt: IRQ7.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (1023 buckets, 8184 max) - 224 bytes per conntrack
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50 { LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)  The failed "Read 10" packet command was:
  "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50 { LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)  The failed "Read 10" packet command was:
  "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x50 { LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
  Error: Illegal request -- (Sense key=0x05)
  Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)  The failed "Read 10" packet command was:
  "28 00 00 00 00 10 00 00 01 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 64
isofs_fill_super: bread failed, dev=hdc, iso_blknum=16, block=16


please tell me what should i do?
Logged
lagagnon
Global Moderator
Vectorian
*****
Posts: 1922



WWW
« Reply #17 on: July 10, 2007, 05:47:40 pm »

The message errors at the bottom of dmesg indicate a hardware fault with your CDROM drive. You should first of all check its ribbon connection inside the case and then try to reflash the ROM BIOS within the CDROM. You need the exact make and model of the CDROM drive and then go to the manufacturer's website to download a bootable ROM flash floppy. If that does not work the drive is toast and you will need to replace it.

Logged

"As people become more intelligent they care less for preachers and more for teachers". Robert G. Ingersoll
ekonik3
Member
*
Posts: 11


« Reply #18 on: July 18, 2007, 12:36:58 am »

thank you all. now i have vectorlinux on my pentium 3 and working well for dayly use and internet connection. but as a root, i cant change the permission of my harddisk with windows partition. so, tell me how to change the permission so i can write on that partition? 
Logged
Triarius Fidelis
Vecteloper
Vectorian
****
Posts: 2399


Domine, exaudi vocem meam


WWW
« Reply #19 on: July 18, 2007, 06:34:10 am »

thank you all. now i have vectorlinux on my pentium 3 and working well for dayly use and internet connection. but as a root, i cant change the permission of my harddisk with windows partition. so, tell me how to change the permission so i can write on that partition? 

I think the issue is whether your Windows partition is mounted as read-only. Is it NTFS?
Logged

"Leatherface, you BITCH! Ho Chi Minh, hah hah hah!"

Formerly known as "Epic Fail Guy" and "Döden" in recent months
ekonik3
Member
*
Posts: 11


« Reply #20 on: July 19, 2007, 12:03:19 am »

yes i'm using NTFS format for that disk. so, tell me how can i access it (including read & write to it)?what commandline should i use?
Logged
lagagnon
Global Moderator
Vectorian
*****
Posts: 1922



WWW
« Reply #21 on: July 19, 2007, 06:24:05 am »

In our FAQ forum there is a post on exactly that topic.
Logged

"As people become more intelligent they care less for preachers and more for teachers". Robert G. Ingersoll
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!