VectorLinux
October 25, 2014, 01:07:09 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: Problem with VASM: asks erroneously for lower-case username  (Read 3419 times)
demigaucher
Member
*
Posts: 58


« on: July 18, 2007, 02:50:44 pm »

Hi all

I tried to create a new user, using K > system > administration > VASM.

I choose "SUPER" and gave the root password.

Then I selected "USER" <OK> then "ADD" <OK> and was asked
a "Login name for the new user (lower case and digit)".

I typed "johnsmith" in lower case <OK> , and...error message:
"User johnsmith contains illegal characters (CAPITAL)"

HuhHuh? I checked the typing of johnsmith: it was correct. I tried
several times from the menu K itself, in case of some improbable
invisible character wrongly typed in: same result.

OK, no problem: back to good old console and useradd command,
but what the hell is occuring ?

Demigaucher
VL 5.8 soho on old P3@700 MHz & 320MB ram
Logged
roseway
Packager
Vectorite
****
Posts: 135



« Reply #1 on: July 18, 2007, 10:44:06 pm »

I can't answer your question, but I just did exactly the same thing and it worked fine.
Logged

Eric
demigaucher
Member
*
Posts: 58


« Reply #2 on: July 19, 2007, 01:22:18 pm »

Hi Roseway, and thank you for your answer.

It took me some time (install a pristine VL on a test partition, and
apply one by one my personalizations till the symptom appears), but
I found what was wrong: in /etc/profile.d there are two files "lang.sh"
and "lang.csh" that I had modified to internationalize VL (changing
loacales, language, etc...). Apparently, changing  "lang.csh" did not
cause problems, but modifying "lang.sh" caused VASM to malfunction.

I re-installed the initial files, and everything runs smooth now... with
console in english.

Best regards to all

Demigaucher
VL5.8-soho on old P3@700 MHz and 320 MB ram



Logged
metvas
Vectorite
***
Posts: 311


« Reply #3 on: July 19, 2007, 09:04:20 pm »

Hello:
If I read you right you wanted to change to your native language?
If so go here http://vector.ecosq.com/ic/FAQs goto FAQ page and #1.13 hanumizzle posted the solution.
regrads
Darrell
Logged

Knowledge is Power, share it.
Be the change you want to see in the World
demigaucher
Member
*
Posts: 58


« Reply #4 on: July 20, 2007, 08:18:52 am »

Thank you metvas, I go and have a look there immediately
(now, Open Office is in english again   Huh )

Best reagards to all readers.

Demigaucher
VL5.8-soho on old P3@700MHz & 320MB ram

Logged
demigaucher
Member
*
Posts: 58


« Reply #5 on: July 20, 2007, 08:36:07 am »

Hi again

I followed the instructions, and everything runs smooth now:
VASM does not malfunction any longer, Open Office is in
french, etc...

Thanks to all the VL staff

Demigaucher
VL5.8-soho on old P3@700MHz & 320 MB ram
Logged
metvas
Vectorite
***
Posts: 311


« Reply #6 on: July 20, 2007, 10:52:36 am »

Very happy you up an running in your native language. Keep in touch.Happy Vectoring. Thanks hanumizzle good job.
Regards
Darrell
Logged

Knowledge is Power, share it.
Be the change you want to see in the World
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!