VectorLinux
December 19, 2014, 11:55:38 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: [SOLVED] LCD shows vertical lines  (Read 3141 times)
Verlager
Member
*
Posts: 34


« on: July 18, 2007, 10:20:03 pm »

I am using VL-SOHO 5.8 on a EliteGroup (ECS) 761GX-M754 motherboard with a Sempron 3000mHz CPU. The Viewsonic LCD V720 works fine in Windows, but not in any Linux I have tried. I get vertical lines spaced about 1" apart. What can I do? Here is my ddcprobe and xorg.conf:

==========================================
DCCPROBE:

VESA 3.0 detected.
OEM Name: SiS
Vendor Name: Silicon Integrated Systems Corp.
Product Name: 6330
Product Revision: 3.17.00
Memory installed = 512 * 64k blocks = 32768kb
Supported standard modes:
   800x600x16
   640x480x256
   640x400x256
   800x600x256
   1024x768x16
   1024x768x256
   1280x1024x256
   320x200x32k
   320x200x64k
   640x480x32k
   640x480x64k
   800x600x32k
   800x600x64k
   1024x768x32k
   1024x768x64k
   1280x1024x32k
   1280x1024x64k
   640x480x16m
   800x600x16m
   1024x768x16m
   1280x1024x16m
EDID ver. 1 rev. 3.
Manufacturer: VSC
ID: 28683
EISA ID: VSC28683
Serial number: dadb6101.
Manufactured in week 45 of 2003.
Input signal type: analog signal.
Screen size max 34 cm horizontal, 27 cm vertical.
Gamma: 2.200000.
DPMS flags: RGB, active off, no suspend, no standby.
Established timings:
   720x400 @ 70 Hz (VGA 640x400, IBM)
   720x400 @ 88 Hz (XGA2)
   640x480 @ 60 Hz (VGA)
   640x480 @ 67 Hz (Mac II, Apple)
   640x480 @ 72 Hz (VESA)
   640x480 @ 75 Hz (VESA)
   800x600 @ 60 Hz (VESA)
   800x600 @ 72 Hz (VESA)
   800x600 @ 75 Hz (VESA)
   832x624 @ 75 Hz (Mac II)
   1024x768 @ 87 Hz Interlaced (8514A)
   1024x768 @ 70 Hz (VESA)
   1024x768 @ 75 Hz (VESA)
   1280x1024 @ 75 Hz (VESA)
Standard timing 0: 60 Hz, 1280x1024
Standard timing 1: 75 Hz, 1152x864
Detailed timing 0:
   Pixel clock: 108000000
   Horizontal active time (pixel width): 256
   Horizontal blank time (pixel width): 1432
   Vertical active time (pixel height): 0
   Vertical blank time (pixel height): 1066
   Horizontal sync offset: 48
   Horizontal sync pulse width: 112
   Vertical sync offset: 3
   Vertical sync pulse width: 1
   Dimensions: 338x270
Monitor details 1:
   Serial number: A1J034501554
Monitor details 2:
   Timing ranges: horizontal = 30 - 82, vertical = 50 - 75
Monitor details 3:
   Name: VA720-2

END OF DCCPROBE

=================================================================

XORG.CONF

Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath      "/usr/X11R6/lib/X11/rgb"
ModulePath   "/usr/X11R6/lib/modules"
FontPath     "/usr/X11R6/lib/X11/fonts/misc/"
FontPath     "/usr/X11R6/lib/X11/fonts/TTF/"
FontPath     "/usr/X11R6/lib/X11/fonts/Type1/"
FontPath     "/usr/X11R6/lib/X11/fonts/CID/"
FontPath     "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath     "/usr/X11R6/lib/X11/fonts/100dpi/"
FontPath     "/usr/X11R6/lib/X11/fonts/truetype/"
FontPath     "/usr/X11R6/lib/X11/fonts/local/"
FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic/"
EndSection

Section "Module"
Load  "glx"
Load  "extmod"
Load  "xtrap"
Load  "record"
Load  "dbe"
Load  "dri"
Load  "freetype"
Load  "type1"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
Option  "XkbLayout"  "us"   ## KEYBOARD_MAP!
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option       "Protocol" "auto"
Option       "Device" "/dev/mouse"
Option       "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
#DisplaySize     340   270   # mm
Identifier   "Monitor0"
VendorName   "VSC"
ModelName    "VA720-2"
HorizSync 30-82
VertRefresh 50-75
### Comment all HorizSync and VertSync values to use DDC:
HorizSync    30.0 - 82.0
VertRefresh  50.0 - 75.0
Option       "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [
arg]: arg optional
#Option     "Accel"                 # [<bool>]
#Option     "AccelMethod"           # <str>
#Option     "TurboQueue"            # [<bool>]
#Option     "FastVram"              # [<bool>]
#Option     "HostBus"               # [<bool>]
#Option     "RenderAcceleration"    # [<bool>]
#Option     "ForceCRT1Type"         # <str>
#Option     "ForceCRT2Type"         # <str>
#Option     "ShadowFB"              # [<bool>]
#Option     "DRI"                   # [<bool>]
#Option     "AGPSize"               #
#Option     "GARTSize"              #
#Option     "Vesa"                  # [
<bool>]
#Option     "MaxXFBMem"             #
#Option     "EnableSiSCtrl"         # [
<bool>]
#Option     "SWCursor"              # [<bool>]
#Option     "HWCursor"              # [<bool>]
#Option     "UseColorHWCursor"      # [<bool>]
#Option     "Rotate"                # <str>
#Option     "Reflect"               # <str>
#Option     "Xvideo"                # [<bool>]
#Option     "InternalModes"         # [<bool>]
#Option     "OverruleFrequencyRanges"    # [<bool>]
#Option     "RestoreBySetMode"      # [<bool>]
#Option     "ForceCRT1"             # [<bool>]
#Option     "XvOnCRT2"              # [<bool>]
#Option     "PanelDelayCompensation"    #
#Option     "PDC"                   #
#Option     "PanelDelayCompensation2"    #
#Option     "PDC2"                  #
#Option     "PanelDelayCompensation1"    #
#Option     "PDC1"                  #
#Option     "EMI"                   #
#Option     "LVDSHL"                #
#Option     "ForcePanelRGB"         #
#Option     "SpecialTiming"         # <str>
#Option     "TVStandard"            # <str>
#Option     "UseROMData"            # [
<bool>]
#Option     "UseOEMData"            # [<bool>]
#Option     "YV12"                  # [<bool>]
#Option     "CHTVType"              # [<bool>]
#Option     "CHTVOverscan"          # [<bool>]
#Option     "CHTVSuperOverscan"     # [<bool>]
#Option     "CHTVLumaBandwidthCVBS"    #
#Option     "CHTVLumaBandwidthSVIDEO"    #
#Option     "CHTVLumaFlickerFilter"    #
#Option     "CHTVChromaBandwidth"    #
#Option     "CHTVChromaFlickerFilter"    #
#Option     "CHTVCVBSColor"         # [
<bool>]
#Option     "CHTVTextEnhance"       #
#Option     "CHTVContrast"          #
#Option     "SISTVEdgeEnhance"      #
#Option     "SISTVAntiFlicker"      # <str>
#Option     "SISTVSaturation"       #
#Option     "SISTVCFilter"          # [
<bool>]
#Option     "SISTVYFilter"          #
#Option     "SISTVColorCalibFine"    #
#Option     "SISTVColorCalibCoarse"    #
#Option     "SISTVXScale"           #
#Option     "SISTVYScale"           #
#Option     "TVXPosOffset"          #
#Option     "TVYPosOffset"          #
#Option     "SIS6326TVAntiFlicker"    # <str>
#Option     "SIS6326TVEnableYFilter"    # [
<bool>]
#Option     "SIS6326TVYFilterStrong"    # [<bool>]
#Option     "SIS6326TVForcePlug"    # <str>
#Option     "SIS6326FSCAdjust"      #
#Option     "YPbPrAspectRatio"      # <str>
#Option     "TVBlueWorkAround"      # [
<bool>]
#Option     "ColorHWCursorBlending"    # [<bool>]
#Option     "ColorHWCursorBlendThreshold"    #
#Option     "CRT2Detection"         # [
<bool>]
#Option     "ForceCRT2ReDetection"    # [<bool>]
#Option     "SenseYPbPr"            # [<bool>]
#Option     "CRT1Gamma"             # [<bool>]
#Option     "CRT2Gamma"             # [<str>]
#Option     "GammaBrightness"       # <str>
#Option     "GammaBrightnessCRT2"    # <str>
#Option     "CRT2GammaBrightness"    # <str>
#Option     "Brightness"            # <str>
#Option     "NewGammaBrightness"    # <str>
#Option     "CRT2Brightness"        # <str>
#Option     "CRT2NewGammaBrightness"    # <str>
#Option     "Contrast"              # <str>
#Option     "NewGammaContrast"      # <str>
#Option     "CRT2Contrast"          # <str>
#Option     "CRT2NewGammaContrast"    # <str>
#Option     "CRT1Saturation"        #
#Option     "XvGamma"               # [
<str>]
#Option     "XvDefaultContrast"     #
#Option     "XvDefaultBrightness"    #
#Option     "XvDefaultHue"          #
#Option     "XvDefaultSaturation"    #
#Option     "XvDefaultDisableGfx"    # [
<bool>]
#Option     "XvDefaultDisableGfxLR"    # [<bool>]
#Option     "XvChromaMin"           #
#Option     "XvChromaMax"           #
#Option     "XvUseChromaKey"        # [
<bool>]
#Option     "XvInsideChromaKey"     # [<bool>]
#Option     "XvYUVChromaKey"        # [<bool>]
#Option     "XvDisableColorKey"     # [<bool>]
#Option     "XvUseMemcpy"           # [<bool>]
#Option     "BenchmarkMemcpy"       # [<bool>]
#Option     "XvDefaultAdaptor"      # <str>
#Option     "ScaleLCD"              # [<bool>]
#Option     "CenterLCD"             # [<bool>]
#Option     "EnableHotkey"          # [<bool>]
#Option     "ForceCRT1VGAAspect"    # <str>
#Option     "ForceCRT2VGAAspect"    # <str>
#Option     "MergedFB"              # [<str>]
#Option     "TwinView"              # [<str>]
#Option     "MergedFBAuto"          # [<bool>]
#Option     "CRT2HSync"             # <str>
#Option     "SecondMonitorHorizSync"    # <str>
#Option     "CRT2VRefresh"          # <str>
#Option     "SecondMonitorVertRefresh"    # <str>
#Option     "CRT2Position"          # <str>
#Option     "TwinViewOrientation"    # <str>
#Option     "MetaModes"             # <str>
#Option     "MergedDPI"             # <str>
#Option     "MergedXinerama"        # [<bool>]
#Option     "TwinviewXineramaInfo"    # [<bool>]
#Option     "MergedXineramaCRT2IsScreen0"    # [<bool>]
#Option     "MergedNonRectangular"    # [<bool>]
#Option     "MergedMouseRestriction"    # [<bool>]
Identifier  "Card0"
Driver      "sis"
VendorName  "Silicon Integrated Systems [SiS]"
BoardName   "661/741/760/761 PCI/AGP VGA Display Adapter"
BusID       "PCI:1:0:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport   0 0
Depth     1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
« Last Edit: July 19, 2007, 06:31:25 pm by Verlager » Logged

Fear believes; courage doubts. Fear falls upon the earth and prays; courage stands erect and thinks. Fear retreats; courage advances. Fear is barbarism; courage is civilization. Fear believes in witchcraft, in devils and in ghosts. Fear is religion, courage is science. —Robert Ingersoll
saulgoode
Vectorite
***
Posts: 340



« Reply #1 on: July 18, 2007, 11:03:06 pm »

Does the problem persist if you use the VESA driver?
Logged

A complex system that works is invariably found to have evolved from a simple system that works.
Verlager
Member
*
Posts: 34


« Reply #2 on: July 19, 2007, 04:46:15 am »

Does the problem persist if you use the VESA driver?

I am using the on-board video VGA port, but if this isn't fixed today, I will order a $50 nVidia PCI Express video card from TigerDirect.

How do I try the VESA driver? Won't that be old tech and cruddy?
Logged

Fear believes; courage doubts. Fear falls upon the earth and prays; courage stands erect and thinks. Fear retreats; courage advances. Fear is barbarism; courage is civilization. Fear believes in witchcraft, in devils and in ghosts. Fear is religion, courage is science. —Robert Ingersoll
lagagnon
Global Moderator
Vectorian
*****
Posts: 1922



WWW
« Reply #3 on: July 19, 2007, 06:47:18 am »

I agree with saulgoode - the "sis" driver can be a bit clumsy. Edit your /etc/X11/xorg.conf file as root in a terminal and change the line: Driver "sis" to Driver "vesa" and see if that helps.
Logged

"As people become more intelligent they care less for preachers and more for teachers". Robert G. Ingersoll
rbistolfi
Packager
Vectorian
****
Posts: 2291


« Reply #4 on: July 19, 2007, 07:15:35 am »

I have the same chipset and I can confirm the vesa driver works better then the sis driver.
Logged

"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!
Verlager
Member
*
Posts: 34


« Reply #5 on: July 19, 2007, 06:31:03 pm »

Solved! Works all right, but google earth can't find a driver and movies look like crap. I have ordered a $50 video card which will solve much, I believe.
« Last Edit: July 19, 2007, 11:21:09 pm by Verlager » Logged

Fear believes; courage doubts. Fear falls upon the earth and prays; courage stands erect and thinks. Fear retreats; courage advances. Fear is barbarism; courage is civilization. Fear believes in witchcraft, in devils and in ghosts. Fear is religion, courage is science. —Robert Ingersoll
rbistolfi
Packager
Vectorian
****
Posts: 2291


« Reply #6 on: July 20, 2007, 07:00:12 am »

Yes, Google earth needs 3d accel, I think, and yes, my movies looks not so good here too. But is my card, I have seen good quality with vesa in other cards. 
Logged

"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!