VectorLinux
November 01, 2014, 04:18:05 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: No Sound On IBM Thinpad 600E.....(Solved)  (Read 1965 times)
never_stop_learning
Vectorite
***
Posts: 263


WWW
« on: July 21, 2007, 01:00:13 pm »

My apologies if I asked this before. I looked for a previous post but was unable to find it.

I am trying to get sound working on an IBM ThinkPad 600E (2645-4AU) running Vector 5.8 Standard Gold. I disabled quickboot and ran alsaconf. No sound.

Results of lsmod:

Quote
vector:/~
root:# lsmod
Module                  Size  Used by
xt_tcpudp               3968  4
iptable_nat             6660  0
ip_nat                 13868  1 iptable_nat
xt_state                2816  7
iptable_mangle          3200  0
ipt_REJECT              4864  1
ip_conntrack_ftp        6640  0
ip_conntrack_irc        6128  0
iptable_filter          3328  1
ip_conntrack           37600  5 iptable_nat,ip_nat,xt_state,ip_conntrack_ftp,ip_conntrack_irc
ip_tables              12020  3 iptable_nat,iptable_mangle,iptable_filter
x_tables               11140  5 xt_tcpudp,iptable_nat,xt_state,ipt_REJECT,ip_tables
freq_table              4512  0
sg                     25500  0
snd_intel8x0           27036  0
snd_seq_dummy           3716  0
snd_seq_oss            27392  0
snd_seq_midi_event      6528  1 snd_seq_oss
snd_seq                42320  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            37280  0
snd_mixer_oss          14080  1 snd_pcm_oss
orinoco_cs             14596  1
orinoco                34068  1 orinoco_cs
hermes                  6656  2 orinoco_cs,orinoco
pcmcia                 22560  1 orinoco_cs
shpchp                 29604  0
evdev                   8320  0
snd_cs46xx             72520  0
gameport               11912  1 snd_cs46xx
snd_rawmidi            18592  1 snd_cs46xx
snd_seq_device          6924  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec         80160  2 snd_intel8x0,snd_cs46xx
snd_ac97_bus            3072  1 snd_ac97_codec
snd_pcm                61828  4 snd_intel8x0,snd_pcm_oss,snd_cs46xx,snd_ac97_codec
snd_timer              18692  2 snd_seq,snd_pcm
snd                    39780  11 snd_intel8x0,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore               8032  1 snd
snd_page_alloc          8072  3 snd_intel8x0,snd_cs46xx,snd_pcm
i2c_piix4               8076  0
i2c_core               16256  1 i2c_piix4
yenta_socket           22156  4
rsrc_nonstatic         10624  1 yenta_socket
pcspkr                  3456  0
pcmcia_core            31512  4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
intel_agp              19100  1
serio_raw               6148  0

I found and tried the following suggestion:

Quote
vector:/~
root:# modprobe snd-cs4236 isapnp=0 cport=0x538 port=0x530 sb_port=0x220 fm_port=0x388 irq=5 dma1=1 dma2=0
FATAL: Error inserting snd_cs4236 (/lib/modules/2.6.18.5/kernel/sound/isa/cs423x/snd-cs4236.ko): No such device

During alsaconf I get the following:

Quote
Probing legacy cards..   This may take a few minutes..
Probing: cs4236grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
grep: /sys/bus/pnp/devices/??:*/resources: No such file or directory
 : FOUND!!

Followed by:

Quote
Loading driver...
/usr/sbin/alsaconf: line 904: rcalsasound: command not found
Setting default volumes...
amixer: Mixer attach default error: No such device

And a 2d lsmod:

Quote
vector:/~
root:# lsmodModule                  Size  Used by
xt_tcpudp               3968  4
iptable_nat             6660  0
ip_nat                 13868  1 iptable_nat
xt_state                2816  7
iptable_mangle          3200  0
ipt_REJECT              4864  1
ip_conntrack_ftp        6640  0
ip_conntrack_irc        6128  0
iptable_filter          3328  1
ip_conntrack           37600  5 iptable_nat,ip_nat,xt_state,ip_conntrack_ftp,ip_conntrack_irc
ip_tables              12020  3 iptable_nat,iptable_mangle,iptable_filter
x_tables               11140  5 xt_tcpudp,iptable_nat,xt_state,ipt_REJECT,ip_tables
freq_table              4512  0
sg                     25500  0
snd_intel8x0           27036  0
snd_seq_dummy           3716  0
snd_seq_oss            27392  0
snd_seq_midi_event      6528  1 snd_seq_oss
snd_seq                42320  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_pcm_oss            37280  0
snd_mixer_oss          14080  1 snd_pcm_oss
orinoco_cs             14596  1
orinoco                34068  1 orinoco_cs
hermes                  6656  2 orinoco_cs,orinoco
pcmcia                 22560  1 orinoco_cs
shpchp                 29604  0
evdev                   8320  0
snd_cs46xx             72520  0
gameport               11912  1 snd_cs46xx
snd_rawmidi            18592  1 snd_cs46xx
snd_seq_device          6924  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd_ac97_codec         80160  2 snd_intel8x0,snd_cs46xx
snd_ac97_bus            3072  1 snd_ac97_codec
snd_pcm                61828  4 snd_intel8x0,snd_pcm_oss,snd_cs46xx,snd_ac97_codec
snd_timer              18692  2 snd_seq,snd_pcm
snd                    39780  11 snd_intel8x0,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_cs46xx,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm,snd_timer
soundcore               8032  1 snd
snd_page_alloc          8072  3 snd_intel8x0,snd_cs46xx,snd_pcm
i2c_piix4               8076  0
i2c_core               16256  1 i2c_piix4
yenta_socket           22156  4
rsrc_nonstatic         10624  1 yenta_socket
pcspkr                  3456  0
pcmcia_core            31512  4 orinoco_cs,pcmcia,yenta_socket,rsrc_nonstatic
intel_agp              19100  1
serio_raw               6148  0
vector:/~
root:#

Still no sound. Rebooted. And.......Still no sound.

Finally, dmesg:

Quote
vector:/~
root:# dmesg
Linux version 2.6.18.5 (root@vector.linux.net) (gcc version 3.4.6) #2 SMP PREEMPT Sat Dec 9 19:01:25 MST 2006
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 0000000011fd0000 (usable)
 BIOS-e820: 0000000011fd0000 - 0000000011fdf000 (ACPI data)
 BIOS-e820: 0000000011fdf000 - 0000000011fe0000 (ACPI NVS)
 BIOS-e820: 0000000011fe0000 - 0000000012000000 (reserved)
 BIOS-e820: 00000000fffe0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
287MB LOWMEM available.
On node 0 totalpages: 73680
  DMA zone: 4096 pages, LIFO batch:0
  Normal zone: 69584 pages, LIFO batch:15
DMI 2.2 present.
ACPI: RSDP (v000 IBM                                   ) @ 0x000fd6e0
ACPI: RSDT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x11fd0000
ACPI: FADT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x11fd0100
ACPI: BOOT (v001 IBM    TP600R   0x00000001  0x00000000) @ 0x11fd0040
ACPI: DSDT (v001 IBM    TP600R   0x00000100 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xef08
Allocating PCI resources starting at 20000000 (gap: 12000000:edfe0000)
Detected 363.976 MHz processor.
Built 1 zonelists.  Total pages: 73680
Kernel command line: BOOT_IMAGE=linux ro root=302
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (0124b000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 286388k/294720k available (3139k kernel code, 7820k reserved, 1229k data, 296k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 728.54 BogoMIPS (lpj=364270)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After all inits, caps: 0183f9ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
ACPI: setting ELCR to 0200 (from 0800)
CPU0: Intel Mobile Pentium II stepping 0a
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
migration_cost=0
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd880, last bus=7
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
* this clock source is slow. Consider trying other clock sources
PCI quirk: region ef00-ef3f claimed by PIIX4 ACPI
PCI quirk: region efa0-efaf claimed by PIIX4 SMB
PIIX4 devres C PIO at 15e8-15ef
PIIX4 devres I PIO at 002e-002f
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
ACPI: Power Resource [PSIO] (on)
ACPI: Embedded Controller [EC0] (gpe 9) interrupt mode.
ACPI: Power Resource [PFN0] (off)
ACPI: Power Resource [PVID] (on)
ACPI: Power Resource [PRSD] (off)
ACPI: Power Resource [PDCK] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
  IO window: d000-dfff
  MEM window: 70000000-dfffffff
  PREFETCH window: e0000000-f7ffffff
PCI: Bus 2, cardbus bridge: 0000:00:02.0
  IO window: 00001000-000010ff
  IO window: 00001400-000014ff
  PREFETCH window: 20000000-21ffffff
  MEM window: 22000000-23ffffff
PCI: Bus 6, cardbus bridge: 0000:00:02.1
  IO window: 00001800-000018ff
  IO window: 00001c00-00001cff
  PREFETCH window: 24000000-25ffffff
  MEM window: 26000000-27ffffff
ACPI: PCI Interrupt Link [LNKA] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKA] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKB] BIOS reported IRQ 0, using IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:02.1 -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 196608 bytes)
TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
TCP: Hash tables configured (established 16384 bind 8192)
TCP reno registered
Simple Boot Flag at 0x33 set to 0x1
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Limiting direct PCI/PCI transfers.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Transitioning device [FN00] to D3
ACPI: Transitioning device [FN00] to D3
ACPI: Fan [FN00] (off)
ACPI: Transitioning device [FN20] to D3
ACPI: Transitioning device [FN20] to D3
ACPI: Fan [FN20] (off)
ACPI: Transitioning device [FN60] to D3
ACPI: Transitioning device [FN60] to D3
ACPI: Fan [FN60] (off)
ACPI: Transitioning device [FN70] to D3
ACPI: Transitioning device [FN70] to D3
ACPI: Fan [FN70] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (48 C)
ACPI: Thermal Zone [THM2] (37 C)
ACPI: Thermal Zone [THM6] (27 C)
ACPI: Thermal Zone [THM7] (27 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller at PCI slot 0000:00:07.1
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfcf0-0xfcf7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfcf8-0xfcff, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: WDC WD400VE-00HDT0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: TOSHIBA CD-ROM XM-1902B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33)
hda: cache flushes supported
 hda: hda1 hda2 hda3
hdc: ATAPI 24X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
Loading Adaptec I2O RAID: Version 2.4 Build 5go
Detecting Adaptec I2O RAID controllers...
Adaptec aacraid driver (1.1-5[2409]-mh2)
scsi: <fdomain> Detection failed (no card)
NCR53c406a: no available ports found
sym53c416.c: Version 1.0.0-ac
qlogicfas: no cards were found, please specify I/O address and IRQ using iobase= and irq= optionsFailed initialization of WD-7000 SCSI card!
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megasas: 00.00.03.01 Sun May 14 22:49:52 PDT 2006
GDT-HA: Storage RAID Controller Driver. Version: 3.05
GDT-HA: Found 0 PCI Storage RAID Controllers
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
nsp32: loading...
ipr: IBM Power RAID SCSI Device Driver version: 2.1.3 (March 29, 2006)
libata version 2.00 loaded.
RocketRAID 3xxx SATA Controller driver v1.0 (060426)
st: Version 20050830, fixed bufsize 32768, s/g segs 256
usbmon: debugfs is not available
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] disabled and referenced, BIOS bug
ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 11, io base 0x00008400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
sl811: driver sl811-hcd, 19 May 2005
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI Shortcut mode
Time: tsc clocksource has been installed.
Time: acpi_pm clocksource has been installed.
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
input: AT Translated Set 2 keyboard as /class/input/input0
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 296k freed
IBM TrackPoint firmware: 0x0b, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /class/input/input1
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0x40000000
input: PC Speaker as /class/input/input2
Yenta: CardBus bridge found at 0000:00:02.0 [1014:00eb]
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.0, mfunc 0xfba97543, devctl 0x62
Yenta: ISA IRQ mask 0x00b8, PCI irq 11
Socket status: 30000010
Yenta: CardBus bridge found at 0000:00:02.1 [1014:00eb]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:02.1, mfunc 0xfba97543, devctl 0x62
irq 10: nobody cared (try booting with the "irqpoll" option)
 [<c0135453>] __report_bad_irq+0x2b/0x68
 [<c013551c>] note_interrupt+0x73/0xa3
 [<c0134de1>] __do_IRQ+0xb3/0xee
 [<c0104fbf>] do_IRQ+0x43/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<c013007b>] groups16_from_user+0x49/0x60
 [<c011e4a2>] __do_softirq+0x55/0xba
 [<c011e535>] do_softirq+0x2e/0x32
 [<c011e56c>] irq_exit+0x33/0x3e
 [<c0104fc4>] do_IRQ+0x48/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<c04101bd>] _spin_unlock_irqrestore+0x8/0x1f
 [<c0135143>] setup_irq+0x118/0x164
 [<d28f7f94>] yenta_probe_handler+0x0/0x3b [yenta_socket]
 [<c01352f0>] request_irq+0x80/0x98
 [<d28f7fff>] yenta_probe_cb_irq+0x30/0xd0 [yenta_socket]
 [<d28f74da>] ti12xx_irqroute_func1+0x97/0x1e1 [yenta_socket]
 [<d28f79a2>] ti12xx_override+0xdb/0xf2 [yenta_socket]
 [<d28f8400>] yenta_probe+0x160/0x253 [yenta_socket]
 [<c0296899>] __driver_attach+0x0/0x63
 [<c0240752>] pci_call_probe+0xa/0xc
 [<c0240782>] __pci_device_probe+0x2e/0x3f
 [<c02407b1>] pci_device_probe+0x1e/0x30
 [<c02967f4>] driver_probe_device+0x44/0x95
 [<c02968d4>] __driver_attach+0x3b/0x63
 [<c0295fb5>] bus_for_each_dev+0x36/0x5a
 [<c029690d>] driver_attach+0x11/0x13
 [<c0296899>] __driver_attach+0x0/0x63
 [<c02963a7>] bus_add_driver+0x52/0x84
 [<c0240947>] __pci_register_driver+0x48/0x55
 [<c01325a7>] sys_init_module+0x95/0x1b1
 [<c01028a7>] syscall_call+0x7/0xb
handlers:
[<d28f7f94>] (yenta_probe_handler+0x0/0x3b [yenta_socket])
Disabling IRQ #10
irq 11: nobody cared (try booting with the "irqpoll" option)
 [<c0135453>] __report_bad_irq+0x2b/0x68
 [<c013551c>] note_interrupt+0x73/0xa3
 [<c0134de1>] __do_IRQ+0xb3/0xee
 [<c0104fbf>] do_IRQ+0x43/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<c013007b>] groups16_from_user+0x49/0x60
 [<c011e4a2>] __do_softirq+0x55/0xba
 [<c011e535>] do_softirq+0x2e/0x32
 [<c011e56c>] irq_exit+0x33/0x3e
 [<c0104fc4>] do_IRQ+0x48/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<d28f8050>] yenta_probe_cb_irq+0x81/0xd0 [yenta_socket]
 [<d28f74da>] ti12xx_irqroute_func1+0x97/0x1e1 [yenta_socket]
 [<d28f79a2>] ti12xx_override+0xdb/0xf2 [yenta_socket]
 [<d28f8400>] yenta_probe+0x160/0x253 [yenta_socket]
 [<c0296899>] __driver_attach+0x0/0x63
 [<c0240752>] pci_call_probe+0xa/0xc
 [<c0240782>] __pci_device_probe+0x2e/0x3f
 [<c02407b1>] pci_device_probe+0x1e/0x30
 [<c02967f4>] driver_probe_device+0x44/0x95
 [<c02968d4>] __driver_attach+0x3b/0x63
 [<c0295fb5>] bus_for_each_dev+0x36/0x5a
 [<c029690d>] driver_attach+0x11/0x13
 [<c0296899>] __driver_attach+0x0/0x63
 [<c02963a7>] bus_add_driver+0x52/0x84
 [<c0240947>] __pci_register_driver+0x48/0x55
 [<c01325a7>] sys_init_module+0x95/0x1b1
 [<c01028a7>] syscall_call+0x7/0xb
handlers:
[<c038d41b>] (usb_hcd_irq+0x0/0x4f)
[<d28f6764>] (yenta_interrupt+0x0/0x8e [yenta_socket])
Disabling IRQ #11
pccard: PCMCIA card inserted into slot 0
Yenta TI: socket 0000:00:02.1 probing PCI interrupt failed, trying to fix
irq 10: nobody cared (try booting with the "irqpoll" option)
 [<c0135453>] __report_bad_irq+0x2b/0x68
 [<c013551c>] note_interrupt+0x73/0xa3
 [<c0134de1>] __do_IRQ+0xb3/0xee
 [<c0104fbf>] do_IRQ+0x43/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<c013007b>] groups16_from_user+0x49/0x60
 [<c011e4a2>] __do_softirq+0x55/0xba
 [<c011e535>] do_softirq+0x2e/0x32
 [<c011e56c>] irq_exit+0x33/0x3e
 [<c0104fc4>] do_IRQ+0x48/0x50
 [<c010380a>] common_interrupt+0x1a/0x20
 [<c04101bd>] _spin_unlock_irqrestore+0x8/0x1f
 [<c0135143>] setup_irq+0x118/0x164
 [<d28f7f94>] yenta_probe_handler+0x0/0x3b [yenta_socket]
 [<c01352f0>] request_irq+0x80/0x98
 [<d28f7fff>] yenta_probe_cb_irq+0x30/0xd0 [yenta_socket]
 [<d28f7597>] ti12xx_irqroute_func1+0x154/0x1e1 [yenta_socket]
 [<d28f79a2>] ti12xx_override+0xdb/0xf2 [yenta_socket]
 [<d28f8400>] yenta_probe+0x160/0x253 [yenta_socket]
 [<c0296899>] __driver_attach+0x0/0x63
 [<c0240752>] pci_call_probe+0xa/0xc
 [<c0240782>] __pci_device_probe+0x2e/0x3f
 [<c02407b1>] pci_device_probe+0x1e/0x30
 [<c02967f4>] driver_probe_device+0x44/0x95
 [<c02968d4>] __driver_attach+0x3b/0x63
 [<c0295fb5>] bus_for_each_dev+0x36/0x5a
 [<c029690d>] driver_attach+0x11/0x13
 [<c0296899>] __driver_attach+0x0/0x63
 [<c02963a7>] bus_add_driver+0x52/0x84
 [<c0240947>] __pci_register_driver+0x48/0x55
 [<c01325a7>] sys_init_module+0x95/0x1b1
 [<c01028a7>] syscall_call+0x7/0xb
handlers:
[<d28f7f94>] (yenta_probe_handler+0x0/0x3b [yenta_socket])
Disabling IRQ #10
Yenta TI: socket 0000:00:02.1 no PCI interrupts. Fish. Please report.
Yenta: no PCI IRQ, CardBus support disabled for this socket.
Yenta: check your BIOS CardBus, BIOS IRQ or ACPI settings.
Yenta: ISA IRQ mask 0x00b8, PCI irq 0
Socket status: 30000006
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
piix4_smbus: probe of 0000:00:07.3 failed with error -1
ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
create - never read codec ready from AC'97
it is not probably bug, try to use CS4236 driver
ACPI: PCI interrupt for device 0000:00:06.0 disabled
Sound Fusion CS46xx: probe of 0000:00:06.0 failed with error -5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0xc00-0xcff: clean.
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0x800-0x80f: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: excluding 0xa0000000-0xa0ffffff
cs: memory probe 0x60000000-0x60ffffff: clean.
pcmcia: registering new device pcmcia0.0
orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
eth0: Hardware identity 800c:0000:0001:0000
eth0: Station identity  001f:0006:0001:0003
eth0: Firmware determined as Intersil 1.3.6
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:09:5B:34:AE:C1
eth0: Station name "Prism  I"
eth0: ready
eth0: orinoco_cs at 0.0, irq 3, io 0x0100-0x013f
Adding 556376k swap on /dev/hda1.  Priority:-1 extents:1 across:556376k
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
eth0: New link status: Connected (0001)
ip_tables: (C) 2000-2006 Netfilter Core Team
ip_conntrack version 2.4 (2302 buckets, 18416 max) - 224 bytes per conntrack
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
CS4236+ soundcard not found or device busy
spurious 8259A interrupt: IRQ7.
vector:/~
root:#

Thank you. Your suggestions and assistance are appreciated.....
« Last Edit: July 22, 2007, 02:32:00 pm by never_stop_learning » Logged

Laptop: IBM X60s (Centrino/Duo, 2gb ram, 80gb hd) VL 6.0 Std
Netbook: HP Mini (Intel Atom 1ghz, 2gb ram, 16gb SSD + 8gb flash ) VL 6.0 Std
Desktop: Dell Dimension 5150 (P4 3ghz, 2gb ram, 80gb hd) VL 6.0 Std
Wife's Desktop: Gateway (P4 2ghz, 1gb ram, 80gb hd) VL 6.0 Std
easuter
Global Moderator
Vectorian
*****
Posts: 2160



« Reply #1 on: July 21, 2007, 01:26:32 pm »

I don't know if this is applicable for that Thinkpad model, but my 390X's sound wouldn't work until I disabled the bios power management. This was a bug in the Thinkpad bios that was not corrected.

Maybe try upgrading the bios (could be risky) or try disabling the power management in case the problem is the same as what I had.

HTH
Logged

lagagnon
Global Moderator
Vectorian
*****
Posts: 1922



WWW
« Reply #2 on: July 21, 2007, 02:48:47 pm »

I think easuter is correct because if you look closely through dmesg you see these errors at the end:

"CS4236+ soundcard not found or device busy
spurious 8259A interrupt: IRQ7."

....plus a number of IRQ-ACPI errors. So there is a conflict between the BIOS ACPI settings, IRQ settings and your soundcard. You could also try resetting your BIOS to default values and rebooting the machine to see if some of the IRQ conflicts are resolved, or you might have to try manually fixing IRQ's in the BIOS.
Logged

"As people become more intelligent they care less for preachers and more for teachers". Robert G. Ingersoll
never_stop_learning
Vectorite
***
Posts: 263


WWW
« Reply #3 on: July 21, 2007, 03:32:03 pm »

Thank you, easuter and lagagnon. I will try to disable the bios power management and report back.
Logged

Laptop: IBM X60s (Centrino/Duo, 2gb ram, 80gb hd) VL 6.0 Std
Netbook: HP Mini (Intel Atom 1ghz, 2gb ram, 16gb SSD + 8gb flash ) VL 6.0 Std
Desktop: Dell Dimension 5150 (P4 3ghz, 2gb ram, 80gb hd) VL 6.0 Std
Wife's Desktop: Gateway (P4 2ghz, 1gb ram, 80gb hd) VL 6.0 Std
rbistolfi
Packager
Vectorian
****
Posts: 2290


« Reply #4 on: July 21, 2007, 06:15:41 pm »

I saw a post on another forum suggesting to disable "Quick boot" at bios. I dont own a thinkpad so I dont know what is that, but may be you want to give it a try.
Logged

"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!
never_stop_learning
Vectorite
***
Posts: 263


WWW
« Reply #5 on: July 22, 2007, 02:31:14 pm »

I was unable to figure out how to disable BIOS power management. When I press and hold F1 and then power up my 600E, I enter 'EZ Set-up' which offers limited BIOS options. HOWEVER.....

I re-checked the Quickboot enable/disable option and found that it had re-set to 'enable' after I changed it last time. I re-disabled it, rebooted and I now have sound!!!!!!!

Thank you, everyone.  Cool
Logged

Laptop: IBM X60s (Centrino/Duo, 2gb ram, 80gb hd) VL 6.0 Std
Netbook: HP Mini (Intel Atom 1ghz, 2gb ram, 16gb SSD + 8gb flash ) VL 6.0 Std
Desktop: Dell Dimension 5150 (P4 3ghz, 2gb ram, 80gb hd) VL 6.0 Std
Wife's Desktop: Gateway (P4 2ghz, 1gb ram, 80gb hd) VL 6.0 Std
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!