Im trying to set this up from 2 days and im still stuck.
Im using: old P3 500, 64ram, Vector on it, 2 ethernet cards. One card connected to DSL CABLE modem and second connected with other pc (win xp on it) with cross-cable (working one).
eth0 - local, the one i want to share with 2nd pc
eth1 - card connected with cable modem
Actually i have internet on Vector, can ping windows xp and windows pings me. My steps:
su >> nano /etc/rc.d/rc.inet1 >> eth0, ip: 192.168.0.1, netmask: 255.255.255.0, gateway: 192.168.0.255, DHCP: no
su >> nano /etc/rc.d/rc.inet2 >> eth1, DHCP: yes, all other blank
dns: 126.96.36.199 / 188.8.131.52 (both 100% working polish dns)
after I run /etc/rc.d/rc.inet2 start
i get internet on Vector. I can ping Windows from VL, and ping VL from Vector, but I dont have internet on Windows.
Next i run: su >> vasm >> firewall >> new >> gateway >> enable all services for client >> done
Still no internet on Windows - only ping works.
PLEASE, help me step by step. I was searching for answer for my problem on forum but as far no results. Please - i think many can have same problem.
p.s. I forgot to add. Modifying any INET configurations from VASM -. super > INET gives no results. None of files is modified, and also, as i wrote on previous post, automatic DHCP after restart also doesn't work. WHat the heck is going on?
Is it all with cable connection due modem and with 2 ethernet cards onboard ?