VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: 3Com, PCMCIA, will not connect??- SOLVED!!  (Read 1672 times)

longlivelinux

  • Member
  • *
  • Posts: 8
3Com, PCMCIA, will not connect??- SOLVED!!
« on: December 14, 2008, 01:33:29 pm »

To save a bit of time, I am posting my results first, and having researched..found no clue...The only ting I may need to chg is going to swap to HAL.

Code: [Select]
root:# lspci
00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) (rev 02)
00:02.0 VGA compatible controller: Trident Microsystems Cyber 9397 (rev f3)
00:04.0 Multimedia video controller: C-Cube Microsystems Unknown device 6120
00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
00:0a.0 CardBus bridge: Cirrus Logic PD 6832 PCMCIA/CardBus Ctrlr (rev c1)
00:0a.1 CardBus bridge: Cirrus Logic PD 6832 PCMCIA/CardBus Ctrlr (rev c1)
01:00.0 Ethernet controller: 3Com Corporation 3c575 Megahertz 10/100 LAN CardBus [Boomerang]

Code: [Select]
root:# lsmod
Module                  Size  Used by
nf_nat_irc              3072  0
nf_conntrack_irc        6424  1 nf_nat_irc
nf_nat_ftp              3712  0
nf_conntrack_ftp        9088  1 nf_nat_ftp
iptable_nat             7044  0
nf_nat                 16684  3 nf_nat_irc,nf_nat_ftp,iptable_nat
nf_conntrack_ipv4      14860  2 iptable_nat
nf_conntrack           53896  7 nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,iptable_nat,nf_nat,nf_conntrack_ipv4
nfnetlink               5400  3 nf_nat,nf_conntrack_ipv4,nf_conntrack
iptable_filter          3328  0
ip_tables              11236  2 iptable_nat,iptable_filter
x_tables               12548  2 iptable_nat,ip_tables
apm                    19160  2
freq_table              4768  0
snd_opl3sa2            17644  3
snd_opl3_lib            9600  1 snd_opl3sa2
snd_hwdep               7812  1 snd_opl3_lib
snd_cs4231_lib         22016  1 snd_opl3sa2
snd_mpu401_uart         7808  1 snd_opl3sa2
snd_rawmidi            20128  1 snd_mpu401_uart
snd_seq_dummy           3716  0
snd_seq_oss            32128  0
snd_seq_midi_event      7168  1 snd_seq_oss
snd_seq                48720  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device          7692  5 snd_opl3_lib,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss            38048  0
snd_pcm                69764  3 snd_cs4231_lib,snd_pcm_oss
snd_timer              19972  4 snd_opl3_lib,snd_cs4231_lib,snd_seq,snd_pcm
snd_page_alloc          8712  2 snd_cs4231_lib,snd_pcm
snd_mixer_oss          15232  1 snd_pcm_oss
snd                    45796  19 snd_opl3sa2,snd_opl3_lib,snd_hwdep,snd_cs4231_lib,snd_mpu401_uart,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore               7008  1 snd
3c59x                  40232  0
mii                     5504  1 3c59x
serio_raw               6276  0
i2c_piix4               8332  0
i2c_core               20992  1 i2c_piix4
evdev                   8704  0
joydev                  9152  0

Code: [Select]
root:# lspcmcia
Socket 0 Bridge:        [yenta_cardbus]         (bus ID: 0000:00:0a.0)
  CardBus card -- see "lspci" for more information
Socket 1 Bridge:        [yenta_cardbus]         (bus ID: 0000:00:0a.1)

Code: [Select]
root:# ifconfig
lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:868 errors:0 dropped:0 overruns:0 frame:0
          TX packets:868 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:46316 (45.2 KiB)  TX bytes:46316 (45.2 KiB)
« Last Edit: December 14, 2008, 02:50:42 pm by longlivelinux »
Logged

longlivelinux

  • Member
  • *
  • Posts: 8
Re: 3Com, PCMCIA, will not connect??
« Reply #1 on: December 14, 2008, 01:35:21 pm »

Code: [Select]
root:# mii-tool eth0
eth0: negotiated 100baseTx-FD, link ok

Code: [Select]
root:# ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 00:60:08:B7:F5:51 
          BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
          Interrupt:10 Base address:0x1000

Code: [Select]
root:# ethtool eth0
Settings for eth0:
        Supported ports: [ TP MII ]
        Supported link modes:   10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Supports auto-negotiation: Yes
        Advertised link modes:  10baseT/Half 10baseT/Full
                                100baseT/Half 100baseT/Full
        Advertised auto-negotiation: Yes
        Speed: 100Mb/s
        Duplex: Full
        Port: MII
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: on
        Current message level: 0x00000001 (1)
        Link detected: yes

Thats what I done thus far....It  is an older Gateway(sorry) laptop...  :)

Anyone with ideas on why card is not showing/working properly?? Thanks in advance...
« Last Edit: December 14, 2008, 02:17:05 pm by longlivelinux »
Logged

longlivelinux

  • Member
  • *
  • Posts: 8
Re: 3Com, PCMCIA, will not connect??- SOLVED!!
« Reply #2 on: December 14, 2008, 02:51:05 pm »

swapped to HAL..all is well...!!
Logged