VectorLinux
November 22, 2014, 11:14:21 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: Super Happy Card-Reader Time!  (Read 3985 times)
BlueMage
Vectorite
***
Posts: 274



« on: November 06, 2007, 06:37:05 pm »

Yes, that is what I anticipate at the end of my journey - a working card-reader!

This is on my Acer laptop, a Travelmate 8000 that's 3 years old now.  Everything else Vector-y works - wifi, power management, etc - with the exception of the 4-way scroll button.  But that's not what I'm interested in.

It's also got an all-in-one card-reader, which I'd like to be able to make use of.

Output of lspci:
Code:
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to I/O Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV Processor to AGP Controller (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]
02:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5705 Gigabit Ethernet (rev 03)
02:04.0 Network controller: Intel Corporation PRO/Wireless 2200BG Network Connection (rev 05)
02:06.0 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
02:06.1 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
02:06.2 System peripheral: O2 Micro, Inc. OZ711Mx 4-in-1 MemoryCardBus Accelerator
02:06.3 CardBus bridge: O2 Micro, Inc. OZ711M3/MC3 4-in-1 MemoryCardBus Controller
02:07.0 FireWire (IEEE 1394): Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link)

I can see four entries there for the card-reader, so at the very least it's recognised.

Also, in the /dev/dri folder, there's an entry called card0 - is this in any way related?

Thanks in advance.

(By the way, if anyone wants to take a stab at the 4-way scroll button, I'd be most appreciative - they're treated as mouse buttons)

EDIT:  Whoops, forgot:  running Vector SOHO 5.8 Final
Logged

Acer Laptop:  Vector 5.8 SOHO Final & Windows XP Professional & USB (still alive!)
Compaq POS (almost dead): Vector 5.9 Light Beta 5
Quad-core BEAST: Win 7 Ultimate 64-bit & Vector 5.9 64-bit beta-2
Old 500MHz media box:  Vector 5.8 SOHO Final (dead)
701 EeePC:  Puppeee (based on Puppy 4.01)
wcs
Packager
Vectorian
****
Posts: 1144


« Reply #1 on: January 12, 2008, 03:22:41 am »

I've been using a card reader, but on my desktop computer. Only tried SD cards so far, and the icon shows promptly on the desktop when using HAL.
It also shows up when using vl-hot, but only if you do "sginfo -l" as root after inserting the card. Are you using HAL or vl-hot?

As for the mouse, maybe something on the ZAxis Mapping setting in /etc/X11/xorg.conf ??
Logged
rbistolfi
Packager
Vectorian
****
Posts: 2290


« Reply #2 on: January 12, 2008, 04:51:57 am »

I found a driver here http://www.musclecard.com/sourcedrivers.html
but the download seems to be broken Sad
Logged

"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!
BlueMage
Vectorite
***
Posts: 274



« Reply #3 on: January 14, 2008, 11:11:02 pm »

I've been using a card reader, but on my desktop computer. Only tried SD cards so far, and the icon shows promptly on the desktop when using HAL.
It also shows up when using vl-hot, but only if you do "sginfo -l" as root after inserting the card. Are you using HAL or vl-hot?

VL-Hot - I'm not too enthusiastic about upgrading from 5.8 SOHO on my laptop, as I've put in a fair amount of work to get it just right the way it is, and y'know, it's my baby.

Quote
As for the mouse, maybe something on the ZAxis Mapping setting in /etc/X11/xorg.conf ??

That's what I thought, and I've had a play around with it.  It seems to work - I can put in ZAxis Mapping "3 5" and that seems to work well enough, but, that causes problems if I plug a mouse in - we get some button-mismapping.  Is there a way to automate a swap between the two mappings?  I mean, I've got a few ideas, but the actual implementation I can't figure out yet.

rbistolfi, I'll take a look there, see what I can find.  Man, I wish I'd brought my laptop with me Sad
Logged

Acer Laptop:  Vector 5.8 SOHO Final & Windows XP Professional & USB (still alive!)
Compaq POS (almost dead): Vector 5.9 Light Beta 5
Quad-core BEAST: Win 7 Ultimate 64-bit & Vector 5.9 64-bit beta-2
Old 500MHz media box:  Vector 5.8 SOHO Final (dead)
701 EeePC:  Puppeee (based on Puppy 4.01)
rbistolfi
Packager
Vectorian
****
Posts: 2290


« Reply #4 on: January 15, 2008, 04:52:36 am »

Well, I keep looking for a while and looks like everybody is looking for that driver. You Google the driver name and all what you get is "does anybody knows where can I download this driver?"

About the mouse, must be a to do it. Is it an usb mouse? If it is, perhaps you can get a custom kernel name for it so you can put two  "InputDevice" sections in your xorg.conf, the path of the device would be the key to difference them

Code:
Section "InputDevice"
    Identifier     "Touchpad"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/touchpad"
    Option    "ZAxisMapping" "3 5"

Section "InputDevice"
    Identifier     "UsbMouse"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/usb_mouse"
    Option    "ZAxisMapping" "4 5"

I hope that makes sense, I am thinking at loud here  Roll Eyes. /dev/mouse should be a dinamic symlink now, pointing ora to the mouse ora to the touchpad, so avoiding the symlink and "hardcoding" the path to the proper devices (in the example /dev/usb_mouse and /dev/touchpad) should do it.
« Last Edit: January 15, 2008, 06:47:55 am by rbistolfi » Logged

"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!