VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Author Topic: how to configure dataone modem....(ADSLmodem)  (Read 4326 times)

bentech4u

  • Member
  • *
  • Posts: 5
how to configure dataone modem....(ADSLmodem)
« on: January 22, 2008, 11:48:33 am »

plz help me.....me a new user f VL..

how can we configure ADSL modem through LAN
Logged

rbistolfi

  • Packager
  • Vectorian
  • ****
  • Posts: 2305
Re: how to configure dataone modem....(ADSLmodem)
« Reply #1 on: January 22, 2008, 02:12:12 pm »

Hi, you will have to give some info about the modem, as the exact model. Is it connected to the computer through an USB, or an Ethernet port? Do you need any special software to make it work using another os?
Most of the time, you have to open a browser, type http://192.168.1.1 in the address bar, a screen asking user / password appears, admin / admin are usually the defaults, then you get the modem settings page, and you have to configure your internet connection using the data provided by your ISP.
Logged
"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!

bentech4u

  • Member
  • *
  • Posts: 5
Re: how to configure dataone modem....(ADSLmodem)
« Reply #2 on: January 23, 2008, 07:41:16 am »

Hi, you will have to give some info about the modem, as the exact model. Is it connected to the computer through an USB, or an Ethernet port? Do you need any special software to make it work using another os?
Most of the time, you have to open a browser, type http://192.168.1.1 in the address bar, a screen asking user / password appears, admin / admin are usually the defaults, then you get the modem settings page, and you have to configure your internet connection using the data provided by your ISP.

k k..

I hav a Dlink ADSL modem...me connected through the Ethernet port...

wen me try to connect to the net using a Vectror linux live Cd......,i got the connection.....

but me tryed using the installed Linux(VL).....the pppoe is not activated.....i think der is any configuration in the n/w in the os side...

boz me connected using the live cd,do not change the modem settings.......

tat's he pro...k

den...der is any configuration in the OS side..?
Logged

rbistolfi

  • Packager
  • Vectorian
  • ****
  • Posts: 2305
Re: how to configure dataone modem....(ADSLmodem)
« Reply #3 on: January 23, 2008, 08:32:01 am »

try running as root pppoe-setup. Answer the questions and once finished, run pppoe-start.
Logged
"There is a concept which corrupts and upsets all others. I refer not to Evil, whose limited realm is that of ethics; I refer to the infinite."
Jorge Luis Borges, Avatars of the Tortoise.

--
Jumalauta!!

bentech4u

  • Member
  • *
  • Posts: 5
Re: how to configure dataone modem....(ADSLmodem)
« Reply #4 on: January 25, 2008, 12:48:49 pm »

try running as root pppoe-setup. Answer the questions and once finished, run pppoe-start.

thanks
Logged