Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ultrasonicsite]

[UPDATES]
Monday 16 June 2008
I reinstalled Vector-Linux, and tried it again, it still didn't load 16 bit, however my computer is a little faster now, and I managed to for the first time ever have my /home directory in a different partition.

Xorg.0.log (Press CTRL-F and type "(WW)" without the quotes)

Code: [Select]

_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/vector.linux.net:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6

X.Org X Server 1.4.0
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Slackware 12.1 Slackware Linux Project
Current Operating System: Linux vector.linux.net 2.6.22.14 #1 SMP PREEMPT Sun Nov 25 19:27:11 MST 2007 i686
Build Date: 16 November 2007  09:06:26PM
 
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 16 19:51:04 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/TTF,/usr/share/fonts/OTF,/usr/share/fonts/Type1,/usr/share/fonts/misc,/usr/share/fonts/75dpi/:unscaled.
(**) FontPath set to:
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/OTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi/:unscaled
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d1b00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 8086,7125 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,2415 card 8086,5643 rev 02 class 04,01,00 hdr 00
(II) PCI: 01:0d:0: chip 10ec,8139 card 10ec,8139 rev 10 class 02,00,00 hdr 00
(II) PCI: 01:0e:0: chip 11c1,044e card 1235,044e rev 02 class 07,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B]
[3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xf4100000 - 0xf41fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xf4000000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[7] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[8] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) Inactive PCI resource ranges:
[0] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[1] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[3] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[4] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[5] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[6] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[7] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[8] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[2] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[5] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[11] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[12] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[13] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[15] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[16] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[17] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "type1" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.0, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/lib/xorg/modules/fonts//libtype1.so
(II) Module type1: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.2
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font Type1
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, 965G, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33
(II) Primary Device is: PCI 00:01:0
(--) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[5] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[8] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[9] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[10] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[11] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[12] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[13] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[14] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[15] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[16] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[17] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[5] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[7] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[8] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[9] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[10] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[12] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[13] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[14] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[15] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[16] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[17] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[18] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[19] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[20] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(**) intel(0): Depth 24, (--) framebuffer bpp 24
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(WW) intel(0): DRI is disabled because it runs only at 16-bit depth.
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel(R) 8xx Chipset Video BIOS
(II) intel(0): VESA VBE OEM Software Rev: 4.1
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(R) 8xx Chipset
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: HWP  Model: 2646  Serial#: 16843009
(II) intel(0): Year: 2006  Week: 48
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
(II) intel(0): Sync:  Separate
(II) intel(0): Max H-Image Size [cm]: horiz.: 30  vert.: 22
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.642 redY: 0.337   greenX: 0.306 greenY: 0.581
(II) intel(0): blueX: 0.144 blueY: 0.101   whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@72Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@72Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 832x624@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@70Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): Manufacturer's mask: 0
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 65.0 MHz   Image Size:  304 x 228 mm
(II) intel(0): h_active: 1024  h_sync: 1048  h_sync_end 1184 h_blank_end 1344 h_border: 0
(II) intel(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 806 v_border: 0
(II) intel(0): Ranges: V min: 50  V max: 76 Hz, H min: 30  H max: 63 kHz, PixClock max 80 MHz
(II) intel(0): Monitor name: HP vs15
(II) intel(0): Serial No: CNN6480Z71
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0022f0462601010101
(II) intel(0): 30100103681e1678ee57f5a4564e9424
(II) intel(0): 195054adee0001010101010101010101
(II) intel(0): 01010101010164190040410026301888
(II) intel(0): 360030e410000018000000fd00324c1e
(II) intel(0): 3f08000a202020202020000000fc0048
(II) intel(0): 5020767331350a2020202020000000ff
(II) intel(0): 00434e4e363438305a37310a20200011
(II) intel(0): EDID vendor "HWP", prod id 9798
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(--) intel(0): Chipset: "i810e"
(--) intel(0): Linear framebuffer at 0xF8000000
(--) intel(0): IO registers at addr 0xF4000000
(II) intel(0): Kernel reported 23808 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 95228k available
(==) intel(0): Will alloc AGP framebuffer: 8192 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Monitor0: Using hsync range of 30.00-63.00 kHz
(II) intel(0): Monitor0: Using vrefresh range of 50.00-76.00 Hz
(II) intel(0): Monitor0: Using maximum pixel clock of 80.00 MHz
(II) intel(0): Clock range:   9.50 to 136.00 MHz
(II) intel(0): Not using default mode "640x350" (vrefresh out of range)
(II) intel(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x400" (vrefresh out of range)
(II) intel(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "720x400" (vrefresh out of range)
(II) intel(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (vrefresh out of range)
(II) intel(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (vrefresh out of range)
(II) intel(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (unknown reason)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1024x768" (hsync out of range)
(II) intel(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x864" (hsync out of range)
(II) intel(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (mode clock too high)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x960" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (hsync out of range)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1280x1024" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "576x384" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (hsync out of range)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1400x1050" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1600x1024" (hsync out of range)
(II) intel(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "2048x1536" (insufficient memory for mode)
(II) intel(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode "1152x768" (width too large for virtual size)
(--) intel(0): Virtual size is 1024x768 (pitch 1024)
(**) intel(0): *Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0): *Driver mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0): *Driver mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Driver mode "1024x768": 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) intel(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(**) intel(0):  Driver mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0):  Driver mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0):  Default mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz)
(**) intel(0):  Default mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(**) intel(0):  Default mode "1024x768": 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(**) intel(0):  Driver mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0):  Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(**) intel(0):  Driver mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0):  Driver mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(**) intel(0):  Default mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(**) intel(0):  Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(**) intel(0):  Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(**) intel(0):  Driver mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(**) intel(0):  Driver mode "640x480": 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) intel(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(**) intel(0):  Default mode "640x480": 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz)
(**) intel(0):  Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(**) intel(0):  Driver mode "720x400": 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(**) intel(0): Display dimensions: (300, 220) mm
(**) intel(0): DPI set to (86, 88)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xf4000000 - 0xf407ffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf4100000 - 0xf41000ff (0x100) MX[B]
[7] -1 0 0xf4000000 - 0xf407ffff (0x80000) MX[B](B)
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MX[B](B)
[9] -1 0 0xf4100400 - 0xf41004ff (0x100) MX[B]
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x00003000 - 0x000030ff (0x100) IX[B]
[16] -1 0 0x00001300 - 0x0000133f (0x40) IX[B]
[17] -1 0 0x00001200 - 0x000012ff (0x100) IX[B]
[18] -1 0 0x00001810 - 0x0000181f (0x10) IX[B]
[19] -1 0 0x00001820 - 0x0000183f (0x20) IX[B]
[20] -1 0 0x00001800 - 0x0000180f (0x10) IX[B]
[21] -1 0 0x00003400 - 0x000034ff (0x100) IX[B]
[22] -1 0 0x00003800 - 0x00003807 (0x8) IX[B]
[23] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[24] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(==) intel(0): Write-combining range (0xf8000000,0x4000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 65.0 MHz [ 0x3f 0xa 0x30 ] [ 65 12 3 ]
(II) intel(0): chose watermark 0x22214000: (tab.freq 65.0)
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x00000000 (pgoffset 0)
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1024 pages failed
(Cannot allocate memory)
(II) intel(0): No physical memory available for 4194304 bytes of DCACHE
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x00800000 (pgoffset 2048)
(II) intel(0): Allocated of 4096 bytes for HW cursor
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x00801000 (pgoffset 2049)
(II) intel(0): Allocated of 16384 bytes for ARGB HW cursor
(II) intel(0): Adding 512 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Offscreen Pixmaps
Setting up tile and stipple cache:
16 128x128 slots
4 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(**) Option "dpms"
(**) intel(0): DPMS enabled
(WW) intel(0): Direct rendering disabled
(WW) intel(0): Option "UseEdidFreqs" is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse0: ZAxisMapping: buttons 4 and 5
(**) Mouse0: Buttons: 9
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(WW) Option "XkbModel" requires an string value
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(WW) Option "XkbVariant" requires an string value
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'
FreeType: couldn't find encoding 'ibm-cp850' for '/usr/share/fonts/TTF/DejaVuMonoSans.ttf'

Breakthrough!
Xubuntu is able to enable direct rendering without a problem! I just loaded up Xubuntu, typed glxinfo into a terminal/console and got:

Code: [Select]

Direct Rendering: Yes

typing glxgears gives me a framerate of about 312, while vector linux only gives me 100, with a bit of a glitchy gear animation.

So it seems to be a problem with how Vector-Linux is set up, and not a problem with my videocard itself.

I wonder how I can transfer the settings Xubuntu set up to vector linux. The xorg.conf file on Xubuntu is a lot different then the vector linux one in that it seems to get its settings from another place somewhere. It references other variables/names/file or something, but it does have the sections.

It should also be noted that when Xubuntu starts X, it does give the glitchy colors that vectorlinux has, however it does somehow manage to fix itself within a second and then loads normally!

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
   Identifier   "Generic Keyboard"
   Driver      "kbd"
   Option      "XkbRules"   "xorg"
   Option      "XkbModel"   "pc105"
   Option      "XkbLayout"   "us"
EndSection

Section "InputDevice"
   Identifier   "Configured Mouse"
   Driver      "mouse"
   Option      "CorePointer"
EndSection

Section "Device"
   Identifier   "Configured Video Device"
EndSection

Section "Monitor"
   Identifier   "Configured Monitor"
EndSection

Section "Screen"
   Identifier   "Default Screen"
   Monitor      "Configured Monitor"
   Device      "Configured Video Device"
EndSection

Section "ServerLayout"
   Identifier   "Default Layout"
   Screen      "Default Screen"
EndSection

I hope someone can help me, this is something major, I need direct rendering to do certain things on this computer.

When I would use windows, I could play Tribes 2, a full featured 3D game, so I should have em, Acceleration? Enabled?

Is there a way to check to see if I have that in the terminal?

keywords: DRI GLX Graphics Card INTEL i810 16 bit freeze colors stall broken kernel fix

[ultrasonicsite]

# The following line is auto-generated by VLXconf             
   Driver      "i810"
   VendorName  "Intel"
   BoardName   "Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller"
#   BusID       "PCI:1:0:0"

[Vanger]

Run in terminal glxinfo | grep render
If you see "Yes" - it's yes, if you see "No" - that's no.

[ultrasonicsite]

It says no, but it should say yes, so how can I fix this? It allows for more info but I don't know what to do with

ultrasonicsite:$ glxinfo | grep render
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect

[ultrasonicsite]

I commented out

dri
GLcore

I think it's running a little faster, but DR is still off.

[ultrasonicsite]

http://www.linuxquestions.org/questions/linux-games-33/what-is-direct-rendering-and-how-to-enable-it.-377072/

I found that webpage, and the user seems to have the EXACT same video card and the EXACT same audio setup as me. Maybe we have the same computer.

It says that it will only work on 16 bit depth?

[ultrasonicsite]

Problem is, 8 bit and 24 bit work, but for some odd reason 16 does not?!?

Edit: could downloading compiz-fuzion have been a problem? I noticed the game wouldn't work, so after uninstall compiz-fuzion it did. Could it still be affecting my system? For some reason GLXGEARS has a low frame rate than it used to.

Should I reinstall VL?

[ultrasonicsite]

How can I completely reset X?

[ultrasonicsite]

http://www.linuxquestions.org/questions/linux-hardware-18/i810-graphics-and-dri-problem-517875/

Says I need to recompile the kernel without z-buffer or something.

[budulay]

Hi
I have this issue two, but in my case I couldn't even run "Chromium". in fact I almost couldn't move cursor when I open it. I have Neomagic MagicGraph 256AV  (NM2200) and use 'neomagic' driver.
when I run 'glxinfo | grep render' it answers No.
Does anyone have any suggestions?
I understand, that my computer is slow, but it isn't so slow that I couldn't run Chromium and PPRacer, right?
Thanks in advance.

ps.
the 'man neomagic' says that

Code: [Select]

The driver supports depths 8, 15, 16 and 24 for all  chipsets  except  the  NM2070
       which  does  not support depth 24.  All depths are accelerated except for depth 24
       which is only accelerated on NM2200 and newer models.  All visuals  are  supported
       in  depth 8.  TrueColor and DirectColor visuals are supported in the other depths.


[ultrasonicsite]

Found this in the log!

(WW) intel(0): DRI is disabled because it runs only at 16-bit depth.

I just have to make 16-bit depth work so that it doesn't just crash and display random colors and freeze at login.
I'm getting ever so close to the answer >=P

[ultrasonicsite]

Website is back up. Links should work.
UPDATED: Now includes ATI, NVidia, VIA\S3 Savage, and Intel!!

You can also vote on this thread. Let me know how it is.

Needed: Via and SIS chipset installs

I have seen ALOT of questions concerning this issue.

After starting this thread, I have also noticed alot of people reading this. If you have ANY experience, good or bad, trying to enable DRI on your card/chip, please post them. All experiences can be learned from.

This is also a constantly changing post. Come back and read it again. I'm adding/removing/changing the post constantly, to try to reflect new information as it becomes revealed.

But first, a disclaimer:

READ YOUR DOCUMENTATION

I use Slackware 10.2. I do not know if any of the following will definitely work in any other distribution!
Also, be aware that this may not work on your hardware.

My experience with this issue is mostly with the i810 family of chipsets, but as a general guide, it can be applied to most circumstances.

Check the various sections for your chipset/video card

But remember: Sometimes, because of BIOS limitations, or the card/chip itself, it just won't work

Links to external sites for various related topics:

A link for getting VIA\S3 Savage graphics by /bin/bash is here

This website: www.freedesktop.org/wiki/FrontPage has a ton of info on cards and standards.

***********************************************************

Now for the good stuff:

Mostly about the i810 series: (Check further down for NVidia and ATI)

READ YOUR DOCUMENTATION

FOR SW12: An issue here:http://www.linuxquestions.org/questi...4/#post2850654
Quote:
Originally Posted by Petri Kaukasoina View Post
Package xf86-video-intel-2.1.0-i486-1 has removed the i810 driver /usr/lib/xorg/modules/drivers/i810_drv.so and replaced it with a link to the new intel driver /usr/lib/xorg/modules/drivers/intel_drv.so. So, while you meant to use i810, you used intel instead. Try
Code:

upgradepkg --reinstall xf86-video-i810-1.7.4-i486-1.tgz

to get the real i810 back.
Direct Rendering (DRI) is dependant on many things, among them are kernel support, BIOS (both video and system), memory for the video (either onboard the card itself, or shared system memory), your xorg.conf, and the driver for your card/chip itself.

There are three things that are generally needed for 3D Acceleration (DRI) to take place:

   1. Correct drivers for your video card/chipset. In the case of Intel, most use the supplied i810 driver in X. It will work fine. Some ATI and almost ALL NVidia cards/chips need their own drivers. Go ahead and download them. DO NOT COMPILE/INSTALL YET. Unless you want to do it again later. (I prefer the compile/install once method. You might like to do it multiple times. It's your life. Do as you wish)
   2. Recompile the kernel. As long as you're at it, use the newest from www.kernel.org or the one on the second cd, whichever you want.
   3. Edit /etc/X11/xorg.conf

Those are the quickies. Now for details

Correct Drivers:

Download them. Borrow from a friend. Steal them from your roommate/brother/sister/that weird guy from down the street.
As I said, with the Intel card/chip, the ones installed w/X11 are fine (i810). ATI (if needed)and all NVidia, get them.

Compile the kernel:

Things to have enabled as MODULES:

    * agpgart I don't care if it's a PCI-X bus, DRI requires this. You must also have DRM enabled too.
    * chipset Enable the chipset support for whatever chip you use, ATI, NVidia or Intel.
    * In Character Devices, also enable the same support (i.e., chipset). Also with Intel, enable the i810 AND i910 (As modules)

There are many other things you will need to be able to boot, but look in other threads for details. I'm only going to talk about the DRI enabling here.

Compile, install, and test your kernel. After it is functional, time for the next step. If neccesary, compile and install your driver now, with the new kernel.

Edit /etc/X11/xorg.conf

Now come the variables. There are three general things that must be done (Your hardware driver may not allow these,check your documentation):

   1. Load the DRI driver. Make sure this is showing:
      Code:

            # This loads the GLX module
          Load       "glx"
      # This loads the DRI module
          Load       "dri"

      *** Some higher end cards do not want/will not work with DRI module loaded. READ YOUR DOCUMENTATION
   2. Memory. Must have enough. in the "Graphics device section", find your card. Here is mine as an example:
      Code:

            Section "Device"
          Identifier  "Intel 810"
          Driver      "i810"
          VideoRam    65536
          Option    "XVideo"        "On"
          Option    "MonitorLayout"        "LFP,CRT"
          Option    "DevicePresence"    "On"   
          # Insert Clocks lines here if appropriate
      EndSection

      And:
      Code:

      Section "Screen"
          Identifier  "LCD"
          Device      "Intel 810"
          Monitor     "My Monitor"
          DefaultDepth 24

          Subsection "Display"
              Depth       8
              Modes       "1024x768" "800x600"
              ViewPort    0 0
          EndSubsection
          Subsection "Display"
              Depth       16
              Modes       "1024x768" "800x600"
              ViewPort    0 0
          EndSubsection
          Subsection "Display"
              Depth       24
              Modes       "1024x768" "800x600"
              ViewPort    0 0
          EndSubsection
      EndSection

      *** Note: these are from MY xorg.conf. I do not know if they will work with your hardware.
      Also, the "LFP,CRT" is for my laptop, and the i810 driver. You may have to change it to "CRT,CRT" for yours to work. Check the man i810 pages. ***

   3. At the end of the file, look for this,and add it if you don't have it:
      Code:

            Section "DRI"
          Mode 0666
       EndSection

      You must have the Mode 0666 if you want anybody else to have DRI but root.

There maybe other tweaks that are needed, depending on your configuration and needs.

Checking if DRI is working:

Restart your X session, (restart it, reboot, whatever). When X is up, get a terminal window open. Type "glxinfo". On the second or third line it should say "Direct rendering: yes" .If so, it's working. Type "glxgears", and see what the frames per second is. Disable DRI by not loading the DRI driver in xorg.conf. Restart x and see what the FPS is now in glxgears. SHould be radical. Edit xorg.conf again, renable DRI, restart X, and try glxgears again...Wow. Big difference.

What if DRI is not running:

Try logging in as root, and trying. Your driver may not show that it is functional if you are not root. Also, look in /var/log/Xorg.0.log and see if there are any errors (EE) in there, and what was going on just prior to the error. That ought to steer you in the correct direction.

If this post helps, let us know. And, by the same token, if it doesn't let us know.
Let me know.
As things change, I will edit this.

This is not an all-emcompassing howto. It is just a general guide. Your experience may vary.

If you would like a copy of my xorg.conf, or my kernel config, they can be found here: www.cwwilson721.dyndns.org
The individual files are: xorg.conf and config

*************************************
...

I'll follow this and see where it takes me.

[ultrasonicsite]

Hi
I have this issue two, but in my case I couldn't even run "Chromium". in fact I almost couldn't move cursor when I open it. I have Neomagic MagicGraph 256AV  (NM2200) and use 'neomagic' driver.
when I run 'glxinfo | grep render' it answers No.
Does anyone have any suggestions?
I understand, that my computer is slow, but it isn't so slow that I couldn't run Chromium and PPRacer, right?
Thanks in advance.

ps.
the 'man neomagic' says that

Code: [Select]

The driver supports depths 8, 15, 16 and 24 for all  chipsets  except  the  NM2070
       which  does  not support depth 24.  All depths are accelerated except for depth 24
       which is only accelerated on NM2200 and newer models.  All visuals  are  supported
       in  depth 8.  TrueColor and DirectColor visuals are supported in the other depths.


What is your bit-depth set to?

[ultrasonicsite]

Does Vector Linux have  agpgart enabled?

[ultrasonicsite]

My current non-working /etc/X11/xorg.conf for future reference

Code: [Select]

Section "ServerLayout"
Identifier     "X.org Configured"
Screen      0  "Screen0" 0 0
InputDevice    "Mouse0" "CorePointer"
InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath      "/usr/share/X11/rgb"
ModulePath   "/usr/lib/xorg/modules"
FontPath     "/usr/share/fonts/TTF"
FontPath     "/usr/share/fonts/OTF"
FontPath     "/usr/share/fonts/Type1"
FontPath     "/usr/share/fonts/misc"
FontPath     "/usr/share/fonts/75dpi/:unscaled"
EndSection

Section "Module"
Load  "glx"
Load  "extmod"
Load  "xtrap"
Load  "record"
Load  "GLcore"
Load  "dbe"
Load  "dri"
Load  "freetype"
Load  "type1"
EndSection

Section "InputDevice"
Identifier  "Keyboard0"
Driver      "kbd"
Option  "XkbLayout"  "us"    ## KEYBOARD_MAP!
Option  "XkbModel"  ""    ## KEYBOARD_MODEL!
Option  "Xkbvariant"  ""    ## KEYBOARD_VARIANT!
EndSection

Section "InputDevice"
Identifier  "Mouse0"
Driver      "mouse"
Option     "Protocol" "auto"
Option     "Device" "/dev/input/mice"
Option     "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
 DisplaySize 269 201 # 96 DPI @ 1024x768
  Option "UseEdidFreqs" "1"
#DisplaySize   300   220 # mm
Identifier   "Monitor0"
VendorName   "HWP"
ModelName    "HP vs15"
### Comment all HorizSync and VertRefresh values to use DDC:
HorizSync    30.0 - 63.0
VertRefresh  50.0 - 76.0
Option     "DPMS"
EndSection

Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option     "NoAccel"            # [<bool>]
#Option     "SWcursor"            # [<bool>]
#Option     "ColorKey"            # <i>
#Option     "CacheLines"          # <i>
#Option     "Dac6Bit"            # [<bool>]
#Option     "DRI"                # [<bool>]
#Option     "NoDDC"              # [<bool>]
#Option     "ShowCache"          # [<bool>]
#Option     "XvMCSurfaces"        # <i>
#Option     "PageFlip"            # [<bool>]
Identifier  "Card0"
Driver      "intel"
VendorName  "Intel Corporation"
BoardName   "82810E DC-133 (CGC) Chipset Graphics Controller"
BusID       "PCI:0:1:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport   0 0
Depth     1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport   0 0
Depth     24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Mode 0666
EndSection
             
Section "Extensions"
Option "Composite" "on"
EndSection