VectorLinux
November 21, 2014, 12:08:23 pm *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: VL5.9 Std Gold on IBM box w/ IDA  (Read 1108 times)
abolis
Member
*
Posts: 9


« on: July 15, 2008, 08:51:53 am »

I'm having trouble getting the install CD to see my drive. 

IBM xSeries e232 Server
2x PIII 1.333Ghz
512MB RAM
Compaq Smart Array 4200
6x 36.4GB HDDs in RAID5 Volume

The CD will boot, load the kernel, load the cpqarray module for my controller, and get to setup, at which point it states it can't find any drive.  From CLI, I find that the system hasn't created the block devices necessary to access the drive (/dev/ida/c0d0 and c0d0p{x}).

I started with a 180GB array that had Win2K NTFS partitions on it, have since cleared those and created 3 partitions:
  /dev/ida/c0d0p1 - 512MB ext2 (/boot)
  /dev/ida/c0d0p2 - 2GB swap
  /dev/ida/c0d0p3 - 20GB ext2 (/)

The basic process of booting and accessing my drive from the CD goes like this-
  boot, setup fails, CLI
  mkdir /dev/ida, mknod /dev/ida/c0d0 b 72 0, mknod /dev/ida/c0d0p{x} b 72 {x}
  chmod 660 /dev/ida/c*, chown root:disk /dev/ida/c*
  mount /dev/ida/c0d0p{x} /mnt/{whatever}

As I said, cpqarray module loads AOK (and now that I have it partitioned, it sees /dev/ida/c0d0p{x}), parted and cfdisk see the volume just fine, though fdisk doesn't see the drive geometry correctly, but probedisk won't find the partitions or the drive, and I have to manually create the block nodes every time.

Ideas?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!