VectorLinux

Please login or register.

Login with username, password and session length
Advanced search  

News:

Visit our home page for VL info. For support and documentation, visit the Vector Linux Knowledge Center or search the Knowledge Center and this Forum using the search box above.

Pages: 1 [2]

Author Topic: Two access points  (Read 5084 times)

brig001

  • Member
  • *
  • Posts: 31
Re: Two access points
« Reply #15 on: August 05, 2008, 01:48:15 pm »

Thanks exeterdad and nightshift for taking the time on this one,  I will have a go at a script and post back when I've got something working.

Out of interest, this is the output from iwlist ath0 scan

root:# iwlist ath0 scan
ath0      Scan completed :
          Cell 01 - Address: 00:0E:2E:9A:FB:24
                    ESSID:"dna"
                    Mode:Master
                    Frequency:2.422 GHz (Channel 3)
                    Quality=33/70  Signal level=-62 dBm  Noise level=-95 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
                              9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s
                              48 Mb/s; 54 Mb/s
                    Extra:bcn_int=100
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK 
          Cell 02 - Address: 00:30:BD:98:C9:5E
                    ESSID:"dna"
                    Mode:Master
                    Frequency:2.457 GHz (Channel 10)
                    Quality=31/70  Signal level=-64 dBm  Noise level=-95 dBm
                    Encryption key:on
                    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
                              24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
                              12 Mb/s; 48 Mb/s
                    Extra:bcn_int=100
                    IE: WPA Version 1
                        Group Cipher : TKIP
                        Pairwise Ciphers (1) : TKIP
                        Authentication Suites (1) : PSK 

At least the access points are set the same.  It also looks kind of promising.

I will let you all know how I get on and thanks again.
Brian.
Logged

nightshift

  • Member
  • *
  • Posts: 22
Re: Two access points
« Reply #16 on: August 05, 2008, 03:18:21 pm »

   Vector gets hung up on the different ap's 00:0E:2E:9A:FB:24 and 00:30:BD:98:C9:5E.

    When it tried to connect to the D-link my rutilt would only show the Linksys and not the D-link, Would have to try the scan button on rutilt a few times then it would show the ap for the D-link but would not connect to the D-link. I could only get it to connect to the Linksys wireless router.

nightshift
Logged
Pages: 1 [2]