VectorLinux
September 01, 2014, 10:17:07 am *
Welcome, Guest. Please login or register.
Did you miss your activation email?

Login with username, password and session length
News: Visit our home page for VL info. To search the old message board go to http://vectorlinux.com/forum1. The first VL forum is temporarily offline until we can find a host for it. Thanks for your patience.
 
Now powered by KnowledgeDex.
   Home   Help Search Login Register  
Please support VectorLinux!
Pages: [1]
  Print  
Author Topic: Grub config on VL 5.9 final  (Read 1319 times)
petebarchetta
Member
*
Posts: 26


« on: December 18, 2008, 04:18:17 am »

hello all,

I have a toshiba tecra 520cdt DVD. its running a 20gb drive,160mb ram. INstalled VL on it last night. it all installed correctly, but when the machine reboots to allow it to run off the HD it stops at Grub (bash shell) any tips on gettting it past this?
it did flash up an error briefly before reboot,  but didnt get a chance to read it as it was too quick.

thanks
« Last Edit: December 18, 2008, 05:21:18 am by petebarchetta » Logged

Toshiba Tecra 520cdt (P166mmx,160mb ram, 40gb sata HD-  VL 5.9 Final (in progress)
Compaq DeskproEN (PIII733,384mb ram, 20gb HD) - Debian (knoppix 5.1)
Toshiba Tecra M3 - XP Sad
toothandnail
Tester
Vectorian
****
Posts: 2527


« Reply #1 on: December 18, 2008, 10:58:33 am »

Have you had some other Linux distribution installed? Vector normally uses Lilo, not Grub, so if you are getting a Grub pompt, it probably means that Lilo didn't install and you have the remnants of Grub from another Linux installation. Trouble is, under those circumstances, there is a good chance that the support files for Grub (which are usually found in /boot/grub) are missing.

paul.
Logged
petebarchetta
Member
*
Posts: 26


« Reply #2 on: December 19, 2008, 05:38:12 am »

i have low level formatted the drive and will attempt a re-install. must be left over from my attempt at a debian build......

also is there  an MMX kernel out there for VL? i know there is a sata and alternate ide version. if so how can it be chosen from the bootup option. just want to eek a few more horses out of the ol' girl. might as well use the extra's that were built into the cpu. if i recall correctly when i tried RH4 it said i didnt have Cmov to run it on my laptop???
Logged

Toshiba Tecra 520cdt (P166mmx,160mb ram, 40gb sata HD-  VL 5.9 Final (in progress)
Compaq DeskproEN (PIII733,384mb ram, 20gb HD) - Debian (knoppix 5.1)
Toshiba Tecra M3 - XP Sad
caitlyn
Packager
Vectorian
****
Posts: 2874


WWW
« Reply #3 on: January 05, 2009, 09:16:31 pm »

Support for the now ancient Pentium MMX processor is built into the standard kernel.  No special kernel is needed and I don't believe there is any special kernel tweaking you can do to get more out of a Pentium MMX.  I have a 233MHz Pentium MMX in my 10 year old Toshiba Libretto SS1010, a precursor of today's netbooks.  (OK, it's actually smaller than any netbook made today.)  Vector Linux Light runs as fast as any other distro out there on that box.  Installation is incredibly difficult but once it's installed it just works.
Logged

eMachines EL-1300G desktop, 1.6GHz AMD Athlon 2650e CPU, 4GB RAM, nVidia GeForce 6150 SE video
CentOS 6.5 (will try VL64-7.1 soon)

Toshiba Satellite A135-S4727,  Intel Pentium T2080 / 1.73 GHz, 2GB RAM, Intel GMA 950

HP Mini 110 netbook, 1.6GHz Intel Atom CPU, 2GB RAM, Intel 950 video, VL 7.1
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!